866-861-6317
Ask an Expert
Align Pilates Half Cadillac Wall Unit with Wall Bracket
Ships within 12.0 business days | Free Shipping
- Regular price
- $1,870.00
- Regular price
-
- Sale price
- $1,870.00
- Unit price
- per
Shipping Free
12.0
Description
Half Cadillac repertoire off a wall, with no reformer underneath it and no floor given up
The Align Pilates Half Cadillac Wall Unit with Wall Bracket bolts the Half Cadillac frame onto a solid wall and runs as a standalone apparatus. No reformer sits under it and none is used. You get push through bar, roll down bar, arm and leg spring and standing spring work from a frame 189cm off the floor that projects 56cm into the room. The usual route to this repertoire is a reformer with a tower, which commits a reformer station and a lot of floor. This one spends wall instead. Buyers often call it a Pilates tower.
Three things decide whether you can install this. Check them before you order
1. It bolts to a wall, not to a reformer. Both bracket arms fix to the wall, nothing fixes to the floor, and the bracket will not fit a reformer.
2. Solid walls only. It cannot be used on stud walls. This is the most common reason a buyer ends up unable to install. Brick, block, concrete or solid masonry is required. A stud partition with plasterboard over it will not carry the frame or the spring loads pulled through it. There is no workaround. Check the wall before you order, not after the pallet arrives.
3. Wall fixings and bolts are not supplied. The right anchor depends on what your wall is made of. Align-Pilates recommends professional installation and does not provide it, so budget for an installer to specify the fixings.
Best for, and not ideal for
Best for
- Studios with a spare solid wall that want spring work without losing a reformer
- Rooms where floor area is the constraint and wall area is not
- Physio and rehab rooms adding spring work beside existing kit
- Home studios in masonry buildings with no room for a Cadillac footprint
Not ideal for
- Rooms where the only free wall is stud and plasterboard
- Rented space where drilling structural walls is not permitted
- Buyers who want the flat Cadillac bed, which needs a reformer carriage
- Anyone needing to move or store the apparatus between sessions
Why we carry this one
Most studios reach a point where they want Half Cadillac repertoire and cannot make the floor maths work. A Full Cadillac wants a permanent bay. A reformer mounted Half Cadillac ties up a machine that was earning its keep as a reformer. This unit answers both by using vertical space that was doing nothing.
The upper frame is the one used across the Half Cadillac line: full stainless steel, an aluminium push through bar with rapid adjust height changers, a maple roll down bar, a quick release safety strap and eight springs in two lengths. This is the newer bracket generation, reworked so the whole load path goes into the wall. If your wall is not solid, the answer is a different product, not a heavier bolt.
Wall mounted against reformer mounted
The same Half Cadillac frame does both jobs. What changes is what it hangs off. On this bracket it stands alone, uses no floor beyond its 56cm projection and stays put. What you give up is the flat bed, because Cadillac style supine work comes from a reformer carriage with a mattress converter and platform extender. This is a standing and spring station, not a table.
Mounted on a reformer, the frame turns a machine you own into a two in one. That needs a model specific reformer bracket set, sold separately, and fits A, M and C Series reformers except the C1. For that route already matched and boxed, see the C8-Pro reformer with Half Cadillac or the M8-Pro with Half Cadillac.
| Decision point | Wall mounted, this listing | Reformer mounted |
|---|---|---|
| Reformer needed | No, standalone | Yes, A, M or C Series, not the C1 |
| Extra parts | Wall fixings and bolts, sourced locally | Model specific reformer bracket set |
| Floor used | 56cm of projection | Full reformer length plus walk around space |
| Flat Cadillac bed | No | Yes, with converter and extender |
What the specs mean for you
| Specification | What it means in practice |
|---|---|
| 202.5cm H x 80.5cm W x 56cm D | Two metres of wall height, 80cm wide, intruding 56cm. A 2 metre working strip in front is comfortable |
| 189cm frame height | Sits below a standard ceiling, but allow headroom for the roll down bar arc and a standing client |
| Solid walls only | Brick, block, concrete or masonry. Confirm the substrate before ordering |
| 37.5kg assembled | The wall carries 30kg of frame and 15.7kg of bracket, plus whatever a client pulls through the springs |
| Stainless steel upper frame | Corrosion resistant and easy to wipe down in a humid room |
| 8 springs, two lengths | Standard 47cm and long 64cm, so short and long spring work needs no extra hardware |
| Ten minute frame assembly | Bolting the frame is quick. The skill and time go into fixing the bracket to the wall |
What ships with it
Supplied as a set, code PAPHALFCADA2WALLSET, so frame PAP-HALFCADA2 and bracket PAP-HALFADAPTA2 arrive together.
- Half Cadillac frame, stainless steel upper frame
- Wall unit adapter bracket, top and bottom arms
- 1 aluminium push through bar with rapid adjust height changers
- 1 maple pull down bar, 1 quick release safety strap
- 1 pair of foot straps, 1 pair of hand handles
- 2 pairs of rapid adjust double eyelet spring holders, 8 aluminium carabiners, 8 double ended dog clips
- 8 nickel plated music wire springs: 2 standard 47cm very light yellow, 2 standard 47cm medium red, 2 long 64cm light purple, 2 long 64cm strong red
Also required, sold separately
Not usable straight out of the crate. Two things come from elsewhere.
- Wall fixings and bolts. Not supplied. The correct anchor depends on the wall material, so your installer specifies them.
- A solid wall and a qualified installer. Align-Pilates recommends professional installation and does not provide it. Stud walls are excluded outright.
Optional: additional or replacement springs, and a reformer bracket set if you later move the frame onto a machine.
Call 866-861-6317, 9am to 6pm EST Monday to Friday, and we will run a wall and compatibility check before you order. Tell us what the wall is built from and what the room measures. If it is wrong for your space, we will say so.
Full specifications
| Specification | Detail |
|---|---|
| Product codes | PAP-HALFCADA2 frame with PAP-HALFADAPTA2 wall bracket, supplied together as PAPHALFCADA2WALLSET |
| Assembled dimensions | 202.5cm H x 80.5cm W x 56cm D |
| Assembled weight | 37.5 kg |
| Frame height | 189cm from floor |
| Frame weight | 30 kg |
| Wall bracket weight | 15.7 kg |
| Wall bracket depth | 56 cm |
| Frame material | Full stainless steel upper frame |
| Mounting | Wall mounted. Top and bottom bracket arms fix to the wall, not to the floor and not to a reformer |
| Wall type required | Solid walls only. Cannot be used on stud walls |
| Wall fixings | Not included. Fixings and bolts depend on your wall. Professional installation recommended |
| Reformer required | No. The wall bracket lets the Half Cadillac be used as a standalone unit |
| Springs included | 8 nickel plated music wire springs: 2x Standard 47cm Very Light (Yellow), 2x Standard 47cm Medium (Red), 2x Long 64cm Light (Purple), 2x Long 64cm Strong (Red) |
| Push through bar | Aluminium, with rapid adjust height changers |
| Pull down bar | Maple roll down bar |
| Safety strap | Quick release |
| Assembly | Limited assembly. The frame alone takes about ten minutes |
| Frame compatibility if reformer mounted instead | A, M and C Series reformers except the C1, using the model specific reformer bracket sold separately |
Delivery
Ships freight on a pallet and needs two people to move into position. Assemble it in the room where it will live, against the wall it will be fixed to. White glove delivery and in room assembly are available as a paid add on. Drilling and anchoring into the building fabric stays with your installer.
Common questions
Can I mount this on a stud wall or a plasterboard partition?
No. Align-Pilates states the unit is only suitable for solid walls and cannot be used on stud walls. That covers timber stud, metal stud and any plasterboard skin over a void. If your only free wall is stud, a reformer mounted or freestanding Cadillac is the route.
Do I need a reformer to use this?
No, and that is the point of the bracket. It attaches to the wall and works standalone. Our earlier page said this bracket attaches to A-Series and C-Series reformers. That was wrong, and this page replaces it.
Are the bolts and wall fixings in the box?
No. The right anchor depends on the wall material, its condition and local building practice, so that is left to your installer. Buy them before your delivery date.
How much room do I need in front of it?
The unit is 202.5cm high, 80.5cm wide and projects 56cm. Beyond that, allow clear floor for a client to stand, kneel and lie in front of the frame and for both bars to travel. About 2 metres out is comfortable.
Can I move the frame onto a reformer later?
Yes. It is the standard Half Cadillac frame and fits A, M and C Series reformers except the C1, using the model specific reformer bracket set, a different part sold separately. Call with your model and we will confirm it.
120% Price Match
Financing
Shipping
Warranty
Half Cadillac repertoire off a wall, with no reformer underneath it and no floor given up
The Align Pilates Half Cadillac Wall Unit with Wall Bracket bolts the Half Cadillac frame onto a solid wall and runs as a standalone apparatus. No reformer sits under it and none is used. You get push through bar, roll down bar, arm and leg spring and standing spring work from a frame 189cm off the floor that projects 56cm into the room. The usual route to this repertoire is a reformer with a tower, which commits a reformer station and a lot of floor. This one spends wall instead. Buyers often call it a Pilates tower.
Three things decide whether you can install this. Check them before you order
1. It bolts to a wall, not to a reformer. Both bracket arms fix to the wall, nothing fixes to the floor, and the bracket will not fit a reformer.
2. Solid walls only. It cannot be used on stud walls. This is the most common reason a buyer ends up unable to install. Brick, block, concrete or solid masonry is required. A stud partition with plasterboard over it will not carry the frame or the spring loads pulled through it. There is no workaround. Check the wall before you order, not after the pallet arrives.
3. Wall fixings and bolts are not supplied. The right anchor depends on what your wall is made of. Align-Pilates recommends professional installation and does not provide it, so budget for an installer to specify the fixings.
Best for, and not ideal for
Best for
- Studios with a spare solid wall that want spring work without losing a reformer
- Rooms where floor area is the constraint and wall area is not
- Physio and rehab rooms adding spring work beside existing kit
- Home studios in masonry buildings with no room for a Cadillac footprint
Not ideal for
- Rooms where the only free wall is stud and plasterboard
- Rented space where drilling structural walls is not permitted
- Buyers who want the flat Cadillac bed, which needs a reformer carriage
- Anyone needing to move or store the apparatus between sessions
Why we carry this one
Most studios reach a point where they want Half Cadillac repertoire and cannot make the floor maths work. A Full Cadillac wants a permanent bay. A reformer mounted Half Cadillac ties up a machine that was earning its keep as a reformer. This unit answers both by using vertical space that was doing nothing.
The upper frame is the one used across the Half Cadillac line: full stainless steel, an aluminium push through bar with rapid adjust height changers, a maple roll down bar, a quick release safety strap and eight springs in two lengths. This is the newer bracket generation, reworked so the whole load path goes into the wall. If your wall is not solid, the answer is a different product, not a heavier bolt.
Wall mounted against reformer mounted
The same Half Cadillac frame does both jobs. What changes is what it hangs off. On this bracket it stands alone, uses no floor beyond its 56cm projection and stays put. What you give up is the flat bed, because Cadillac style supine work comes from a reformer carriage with a mattress converter and platform extender. This is a standing and spring station, not a table.
Mounted on a reformer, the frame turns a machine you own into a two in one. That needs a model specific reformer bracket set, sold separately, and fits A, M and C Series reformers except the C1. For that route already matched and boxed, see the C8-Pro reformer with Half Cadillac or the M8-Pro with Half Cadillac.
| Decision point | Wall mounted, this listing | Reformer mounted |
|---|---|---|
| Reformer needed | No, standalone | Yes, A, M or C Series, not the C1 |
| Extra parts | Wall fixings and bolts, sourced locally | Model specific reformer bracket set |
| Floor used | 56cm of projection | Full reformer length plus walk around space |
| Flat Cadillac bed | No | Yes, with converter and extender |
What the specs mean for you
| Specification | What it means in practice |
|---|---|
| 202.5cm H x 80.5cm W x 56cm D | Two metres of wall height, 80cm wide, intruding 56cm. A 2 metre working strip in front is comfortable |
| 189cm frame height | Sits below a standard ceiling, but allow headroom for the roll down bar arc and a standing client |
| Solid walls only | Brick, block, concrete or masonry. Confirm the substrate before ordering |
| 37.5kg assembled | The wall carries 30kg of frame and 15.7kg of bracket, plus whatever a client pulls through the springs |
| Stainless steel upper frame | Corrosion resistant and easy to wipe down in a humid room |
| 8 springs, two lengths | Standard 47cm and long 64cm, so short and long spring work needs no extra hardware |
| Ten minute frame assembly | Bolting the frame is quick. The skill and time go into fixing the bracket to the wall |
What ships with it
Supplied as a set, code PAPHALFCADA2WALLSET, so frame PAP-HALFCADA2 and bracket PAP-HALFADAPTA2 arrive together.
- Half Cadillac frame, stainless steel upper frame
- Wall unit adapter bracket, top and bottom arms
- 1 aluminium push through bar with rapid adjust height changers
- 1 maple pull down bar, 1 quick release safety strap
- 1 pair of foot straps, 1 pair of hand handles
- 2 pairs of rapid adjust double eyelet spring holders, 8 aluminium carabiners, 8 double ended dog clips
- 8 nickel plated music wire springs: 2 standard 47cm very light yellow, 2 standard 47cm medium red, 2 long 64cm light purple, 2 long 64cm strong red
Also required, sold separately
Not usable straight out of the crate. Two things come from elsewhere.
- Wall fixings and bolts. Not supplied. The correct anchor depends on the wall material, so your installer specifies them.
- A solid wall and a qualified installer. Align-Pilates recommends professional installation and does not provide it. Stud walls are excluded outright.
Optional: additional or replacement springs, and a reformer bracket set if you later move the frame onto a machine.
Call 866-861-6317, 9am to 6pm EST Monday to Friday, and we will run a wall and compatibility check before you order. Tell us what the wall is built from and what the room measures. If it is wrong for your space, we will say so.
Full specifications
| Specification | Detail |
|---|---|
| Product codes | PAP-HALFCADA2 frame with PAP-HALFADAPTA2 wall bracket, supplied together as PAPHALFCADA2WALLSET |
| Assembled dimensions | 202.5cm H x 80.5cm W x 56cm D |
| Assembled weight | 37.5 kg |
| Frame height | 189cm from floor |
| Frame weight | 30 kg |
| Wall bracket weight | 15.7 kg |
| Wall bracket depth | 56 cm |
| Frame material | Full stainless steel upper frame |
| Mounting | Wall mounted. Top and bottom bracket arms fix to the wall, not to the floor and not to a reformer |
| Wall type required | Solid walls only. Cannot be used on stud walls |
| Wall fixings | Not included. Fixings and bolts depend on your wall. Professional installation recommended |
| Reformer required | No. The wall bracket lets the Half Cadillac be used as a standalone unit |
| Springs included | 8 nickel plated music wire springs: 2x Standard 47cm Very Light (Yellow), 2x Standard 47cm Medium (Red), 2x Long 64cm Light (Purple), 2x Long 64cm Strong (Red) |
| Push through bar | Aluminium, with rapid adjust height changers |
| Pull down bar | Maple roll down bar |
| Safety strap | Quick release |
| Assembly | Limited assembly. The frame alone takes about ten minutes |
| Frame compatibility if reformer mounted instead | A, M and C Series reformers except the C1, using the model specific reformer bracket sold separately |
Delivery
Ships freight on a pallet and needs two people to move into position. Assemble it in the room where it will live, against the wall it will be fixed to. White glove delivery and in room assembly are available as a paid add on. Drilling and anchoring into the building fabric stays with your installer.
Common questions
Can I mount this on a stud wall or a plasterboard partition?
No. Align-Pilates states the unit is only suitable for solid walls and cannot be used on stud walls. That covers timber stud, metal stud and any plasterboard skin over a void. If your only free wall is stud, a reformer mounted or freestanding Cadillac is the route.
Do I need a reformer to use this?
No, and that is the point of the bracket. It attaches to the wall and works standalone. Our earlier page said this bracket attaches to A-Series and C-Series reformers. That was wrong, and this page replaces it.
Are the bolts and wall fixings in the box?
No. The right anchor depends on the wall material, its condition and local building practice, so that is left to your installer. Buy them before your delivery date.
How much room do I need in front of it?
The unit is 202.5cm high, 80.5cm wide and projects 56cm. Beyond that, allow clear floor for a client to stand, kneel and lie in front of the frame and for both bars to travel. About 2 metres out is comfortable.
Can I move the frame onto a reformer later?
Yes. It is the standard Half Cadillac frame and fits A, M and C Series reformers except the C1, using the model specific reformer bracket set, a different part sold separately. Call with your model and we will confirm it.
RecovAthlete's 120% Price Match Guarantee: Shop With Unmatched Confidence
At RecovAthlete, we're here to support your recovery and performance goals, without overpaying. Our 120% Price Match Guarantee makes sure you always get the best deal. If you find a lower price, not only will we match it, we'll beat it by adding 20% of the price difference back to your refund.
How It Works
- 60-Day Window: If you find the same item at a lower price from an authorized competitor within 60 days of your purchase, we'll match it.
- We Add 20%: Besides matching the price, we give you 20% of the difference back.
- Same Currency: Price comparisons must be in the same currency as your original purchase.
- MAP Policy Required: The competitor must be an authorized dealer of the product and follow a Minimum Advertised Price (MAP) policy set by the manufacturer.
Terms and Conditions
- Eligible Products: Must be the same model, SKU, and from an authorized seller.
- Verifiable Prices: We compare total verifiable selling prices (excluding taxes), including shipping.
- Manual Review: Our team reviews all claims for validity and eligibility.
Exclusions
- Used, refurbished, or secondary-market products
- Wholesale, contract, or below-cost pricing
- Marketplace sellers (Amazon, Walmart, Costco, etc.)
- Flash sales, closeouts, clearance, or limited-time promos
- Price matches can't be combined with other RecovAthlete discounts or offers
Our Ethical Pricing Pledge
We don't undercut manufacturers or sell below cost. We follow ethical pricing standards prioritizing fairness, brand integrity, and long-term trust.
How to Submit a Claim
- Get Proof: A screenshot, ad, or live link showing the competitor's lower price.
- Send Details: Include your order number, the product name, and the competitor info.
- Submit via Contact Page: contact the RecovAthlete team.
- Processing: Allow up to 6 weeks for verification and refund processing.
With our 120% Price Match Guarantee, you can shop knowing you'll never miss out on a better deal, because we'll beat it.
Half Cadillac repertoire off a wall, with no reformer underneath it and no floor given up
The Align Pilates Half Cadillac Wall Unit with Wall Bracket bolts the Half Cadillac frame onto a solid wall and runs as a standalone apparatus. No reformer sits under it and none is used. You get push through bar, roll down bar, arm and leg spring and standing spring work from a frame 189cm off the floor that projects 56cm into the room. The usual route to this repertoire is a reformer with a tower, which commits a reformer station and a lot of floor. This one spends wall instead. Buyers often call it a Pilates tower.
Three things decide whether you can install this. Check them before you order
1. It bolts to a wall, not to a reformer. Both bracket arms fix to the wall, nothing fixes to the floor, and the bracket will not fit a reformer.
2. Solid walls only. It cannot be used on stud walls. This is the most common reason a buyer ends up unable to install. Brick, block, concrete or solid masonry is required. A stud partition with plasterboard over it will not carry the frame or the spring loads pulled through it. There is no workaround. Check the wall before you order, not after the pallet arrives.
3. Wall fixings and bolts are not supplied. The right anchor depends on what your wall is made of. Align-Pilates recommends professional installation and does not provide it, so budget for an installer to specify the fixings.
Best for, and not ideal for
Best for
- Studios with a spare solid wall that want spring work without losing a reformer
- Rooms where floor area is the constraint and wall area is not
- Physio and rehab rooms adding spring work beside existing kit
- Home studios in masonry buildings with no room for a Cadillac footprint
Not ideal for
- Rooms where the only free wall is stud and plasterboard
- Rented space where drilling structural walls is not permitted
- Buyers who want the flat Cadillac bed, which needs a reformer carriage
- Anyone needing to move or store the apparatus between sessions
Why we carry this one
Most studios reach a point where they want Half Cadillac repertoire and cannot make the floor maths work. A Full Cadillac wants a permanent bay. A reformer mounted Half Cadillac ties up a machine that was earning its keep as a reformer. This unit answers both by using vertical space that was doing nothing.
The upper frame is the one used across the Half Cadillac line: full stainless steel, an aluminium push through bar with rapid adjust height changers, a maple roll down bar, a quick release safety strap and eight springs in two lengths. This is the newer bracket generation, reworked so the whole load path goes into the wall. If your wall is not solid, the answer is a different product, not a heavier bolt.
Wall mounted against reformer mounted
The same Half Cadillac frame does both jobs. What changes is what it hangs off. On this bracket it stands alone, uses no floor beyond its 56cm projection and stays put. What you give up is the flat bed, because Cadillac style supine work comes from a reformer carriage with a mattress converter and platform extender. This is a standing and spring station, not a table.
Mounted on a reformer, the frame turns a machine you own into a two in one. That needs a model specific reformer bracket set, sold separately, and fits A, M and C Series reformers except the C1. For that route already matched and boxed, see the C8-Pro reformer with Half Cadillac or the M8-Pro with Half Cadillac.
| Decision point | Wall mounted, this listing | Reformer mounted |
|---|---|---|
| Reformer needed | No, standalone | Yes, A, M or C Series, not the C1 |
| Extra parts | Wall fixings and bolts, sourced locally | Model specific reformer bracket set |
| Floor used | 56cm of projection | Full reformer length plus walk around space |
| Flat Cadillac bed | No | Yes, with converter and extender |
What the specs mean for you
| Specification | What it means in practice |
|---|---|
| 202.5cm H x 80.5cm W x 56cm D | Two metres of wall height, 80cm wide, intruding 56cm. A 2 metre working strip in front is comfortable |
| 189cm frame height | Sits below a standard ceiling, but allow headroom for the roll down bar arc and a standing client |
| Solid walls only | Brick, block, concrete or masonry. Confirm the substrate before ordering |
| 37.5kg assembled | The wall carries 30kg of frame and 15.7kg of bracket, plus whatever a client pulls through the springs |
| Stainless steel upper frame | Corrosion resistant and easy to wipe down in a humid room |
| 8 springs, two lengths | Standard 47cm and long 64cm, so short and long spring work needs no extra hardware |
| Ten minute frame assembly | Bolting the frame is quick. The skill and time go into fixing the bracket to the wall |
What ships with it
Supplied as a set, code PAPHALFCADA2WALLSET, so frame PAP-HALFCADA2 and bracket PAP-HALFADAPTA2 arrive together.
- Half Cadillac frame, stainless steel upper frame
- Wall unit adapter bracket, top and bottom arms
- 1 aluminium push through bar with rapid adjust height changers
- 1 maple pull down bar, 1 quick release safety strap
- 1 pair of foot straps, 1 pair of hand handles
- 2 pairs of rapid adjust double eyelet spring holders, 8 aluminium carabiners, 8 double ended dog clips
- 8 nickel plated music wire springs: 2 standard 47cm very light yellow, 2 standard 47cm medium red, 2 long 64cm light purple, 2 long 64cm strong red
Also required, sold separately
Not usable straight out of the crate. Two things come from elsewhere.
- Wall fixings and bolts. Not supplied. The correct anchor depends on the wall material, so your installer specifies them.
- A solid wall and a qualified installer. Align-Pilates recommends professional installation and does not provide it. Stud walls are excluded outright.
Optional: additional or replacement springs, and a reformer bracket set if you later move the frame onto a machine.
Call 866-861-6317, 9am to 6pm EST Monday to Friday, and we will run a wall and compatibility check before you order. Tell us what the wall is built from and what the room measures. If it is wrong for your space, we will say so.
Full specifications
| Specification | Detail |
|---|---|
| Product codes | PAP-HALFCADA2 frame with PAP-HALFADAPTA2 wall bracket, supplied together as PAPHALFCADA2WALLSET |
| Assembled dimensions | 202.5cm H x 80.5cm W x 56cm D |
| Assembled weight | 37.5 kg |
| Frame height | 189cm from floor |
| Frame weight | 30 kg |
| Wall bracket weight | 15.7 kg |
| Wall bracket depth | 56 cm |
| Frame material | Full stainless steel upper frame |
| Mounting | Wall mounted. Top and bottom bracket arms fix to the wall, not to the floor and not to a reformer |
| Wall type required | Solid walls only. Cannot be used on stud walls |
| Wall fixings | Not included. Fixings and bolts depend on your wall. Professional installation recommended |
| Reformer required | No. The wall bracket lets the Half Cadillac be used as a standalone unit |
| Springs included | 8 nickel plated music wire springs: 2x Standard 47cm Very Light (Yellow), 2x Standard 47cm Medium (Red), 2x Long 64cm Light (Purple), 2x Long 64cm Strong (Red) |
| Push through bar | Aluminium, with rapid adjust height changers |
| Pull down bar | Maple roll down bar |
| Safety strap | Quick release |
| Assembly | Limited assembly. The frame alone takes about ten minutes |
| Frame compatibility if reformer mounted instead | A, M and C Series reformers except the C1, using the model specific reformer bracket sold separately |
Delivery
Ships freight on a pallet and needs two people to move into position. Assemble it in the room where it will live, against the wall it will be fixed to. White glove delivery and in room assembly are available as a paid add on. Drilling and anchoring into the building fabric stays with your installer.
Common questions
Can I mount this on a stud wall or a plasterboard partition?
No. Align-Pilates states the unit is only suitable for solid walls and cannot be used on stud walls. That covers timber stud, metal stud and any plasterboard skin over a void. If your only free wall is stud, a reformer mounted or freestanding Cadillac is the route.
Do I need a reformer to use this?
No, and that is the point of the bracket. It attaches to the wall and works standalone. Our earlier page said this bracket attaches to A-Series and C-Series reformers. That was wrong, and this page replaces it.
Are the bolts and wall fixings in the box?
No. The right anchor depends on the wall material, its condition and local building practice, so that is left to your installer. Buy them before your delivery date.
How much room do I need in front of it?
The unit is 202.5cm high, 80.5cm wide and projects 56cm. Beyond that, allow clear floor for a client to stand, kneel and lie in front of the frame and for both bars to travel. About 2 metres out is comfortable.
Can I move the frame onto a reformer later?
Yes. It is the standard Half Cadillac frame and fits A, M and C Series reformers except the C1, using the model specific reformer bracket set, a different part sold separately. Call with your model and we will confirm it.
Financing for Recovery and Fitness Equipment
Buying for yourself, spread the cost through Affirm at checkout. Buying for a gym, clinic, spa, or studio, apply with one of four business lenders and put the whole room on a single application.
RecovAthlete has no control over any financing decision. Approval is based on your creditworthiness and is solely the lender's decision.
Personal purchase
Affirm at checkout. Rates run 0% to 36% APR based on your credit profile. Soft check to prequalify, so no impact on your score. No prepayment penalty.
Business purchase
Brickhouse Capital, Reliant Capital, Acorn Finance, or KWIPPED. Apply with two of the four and compare. Financed equipment can qualify for a Section 179 deduction. Confirm with your accountant.
Financing by Equipment Category
Every page below has real prices, real monthly payment examples, and the lender comparison for that category. Pick the one you are buying.
Hyperbaric Chamber Financing
Soft-shell and hard-shell HBOT chambers. Session-volume payback math for clinics.
Sauna Financing
Infrared, traditional, barrel, and commercial saunas.
Cold Plunge Financing
Home tubs through commercial chillers and Medical Frozen units.
Red Light Therapy Financing
Panels, pods, and full-body beds for home and clinic.
PEMF Therapy Financing
PEMF mats, systems, and practitioner devices.
Vibration Plate Financing
Whole body vibration platforms for home, studio, and clinic.
Gym Equipment Financing
Home gyms through full commercial strength floors. Finance the floor, not the machine.
Treadmill Financing
Walking pads, commercial belts, and self-powered curved decks.
Commercial Recovery Equipment Financing
Building a recovery room? One quote, one purchase order, one application.
Building a Recovery Room?
Most business buyers are not buying one machine. They are building a room. Sauna, cold plunge, red light, vibration, hyperbaric, cryotherapy, and halotherapy all finance on the same paper through the same four lenders, and RecovAthlete quotes every category on one purchase order.
That means one freight schedule, one install window, and one financing application instead of six. It also gets you a better rate, because a bigger number on one application beats six small ones with six hard inquiries.
See commercial recovery equipment financing, or call 866-861-6317 and we will price the room.
Which Lender Should You Apply With?
| Lender | Type | Amount | Speed | Best for |
|---|---|---|---|---|
| Affirm | Consumer, at checkout | Order total | Seconds | Personal purchases. 0% to 36% APR based on credit. Soft check to prequalify. |
| Brickhouse Capital | Direct equipment lender | Up to $250K on a one-page application, $1M+ with financials | ~24 hours | A full room or a full floor. Credit decisions made in-house. Tied to the business, not your personal credit report. |
| Reliant Capital | Lender and broker | Up to $500K application-only, $5M with financials | 2 to 4 hours | Medical, aesthetic, and wellness. Deferred payment options. New or used equipment. |
| Acorn Finance | Lending marketplace | $1,000 to $100,000 | 60 seconds to prequalify | Comparing offers. One application goes to 30 or more lenders with no impact to your score. |
| KWIPPED (APPROVE) | Lender marketplace | Minimum $1,500 equipment value | 60-second application | Larger commercial orders. Lenders compete, which usually returns the best APR. Businesses only. |
Apply with two of the four and compare. It costs nothing and the spread between offers is often significant.
Apply now
Apply with Brickhouse Capital
Apply with Reliant Capital
Check your offers with Acorn Finance
For KWIPPED, call 866-861-6317 or email info@recovathlete.com and we will build the application around your order.
Financing Questions
What are Affirm's rates?
Pay in 4 splits the purchase into four interest-free payments charged every two weeks. Monthly installments spread the cost over a longer term, with rates from 0% to 36% APR depending on your credit profile. You see the exact terms before you agree to anything. No origination fees, no prepayment penalty, no late fees.
Will applying hurt my credit score?
Prequalification does not. Affirm and Acorn Finance both run a soft check to show you offers, which has no impact on your score. Proceeding with a monthly installment plan or a business loan may involve a hard inquiry. That is why it pays to prequalify with more than one lender first and only proceed with the best offer.
Can I finance equipment for a business?
Yes, and for most business buyers it is the better route. Brickhouse funds up to $250,000 on a one-page application with no financial statements. Reliant approves in 2 to 4 hours. Business financing is usually tied to the business rather than your personal credit report, and financed equipment can qualify for a Section 179 deduction. Confirm the tax position with your accountant.
Should I finance each machine separately?
No. This is the most common and most expensive mistake. Separate applications mean separate hard inquiries, separate payments, and a worse rate on each, because every individual ticket is small. Get one quote from RecovAthlete covering everything you are buying, including freight, and put that single number on one application.
Does Section 179 apply to financed equipment?
Financed equipment can qualify. Section 179 lets US businesses deduct the cost of qualifying equipment in the year it is placed in service, and financing the purchase does not by itself disqualify it. The equipment must be in service, not merely ordered, within the tax year. Annual limits and eligibility rules are set by the IRS and change year to year, so consult your accountant.
Can freight and installation be financed?
Freight, yes. On Affirm it is part of the order total at checkout. On business financing, put freight on the RecovAthlete quote and the whole quote amount goes on the application. Installation and room construction are harder, because some equipment lenders will not fund non-equipment costs. Ask the lender before you sign.
Can I pay off early?
Yes. Affirm charges no prepayment penalties. Acorn Finance and most business lenders also allow early payoff without penalty.
Not sure which option fits?
Tell us what you are buying and whether it is personal or for a business. We will point you at the right two lenders and quote freight and install as one number, which is also the number that goes on the application.
Call 866-861-6317 Book a 30 minute callHalf Cadillac repertoire off a wall, with no reformer underneath it and no floor given up
The Align Pilates Half Cadillac Wall Unit with Wall Bracket bolts the Half Cadillac frame onto a solid wall and runs as a standalone apparatus. No reformer sits under it and none is used. You get push through bar, roll down bar, arm and leg spring and standing spring work from a frame 189cm off the floor that projects 56cm into the room. The usual route to this repertoire is a reformer with a tower, which commits a reformer station and a lot of floor. This one spends wall instead. Buyers often call it a Pilates tower.
Three things decide whether you can install this. Check them before you order
1. It bolts to a wall, not to a reformer. Both bracket arms fix to the wall, nothing fixes to the floor, and the bracket will not fit a reformer.
2. Solid walls only. It cannot be used on stud walls. This is the most common reason a buyer ends up unable to install. Brick, block, concrete or solid masonry is required. A stud partition with plasterboard over it will not carry the frame or the spring loads pulled through it. There is no workaround. Check the wall before you order, not after the pallet arrives.
3. Wall fixings and bolts are not supplied. The right anchor depends on what your wall is made of. Align-Pilates recommends professional installation and does not provide it, so budget for an installer to specify the fixings.
Best for, and not ideal for
Best for
- Studios with a spare solid wall that want spring work without losing a reformer
- Rooms where floor area is the constraint and wall area is not
- Physio and rehab rooms adding spring work beside existing kit
- Home studios in masonry buildings with no room for a Cadillac footprint
Not ideal for
- Rooms where the only free wall is stud and plasterboard
- Rented space where drilling structural walls is not permitted
- Buyers who want the flat Cadillac bed, which needs a reformer carriage
- Anyone needing to move or store the apparatus between sessions
Why we carry this one
Most studios reach a point where they want Half Cadillac repertoire and cannot make the floor maths work. A Full Cadillac wants a permanent bay. A reformer mounted Half Cadillac ties up a machine that was earning its keep as a reformer. This unit answers both by using vertical space that was doing nothing.
The upper frame is the one used across the Half Cadillac line: full stainless steel, an aluminium push through bar with rapid adjust height changers, a maple roll down bar, a quick release safety strap and eight springs in two lengths. This is the newer bracket generation, reworked so the whole load path goes into the wall. If your wall is not solid, the answer is a different product, not a heavier bolt.
Wall mounted against reformer mounted
The same Half Cadillac frame does both jobs. What changes is what it hangs off. On this bracket it stands alone, uses no floor beyond its 56cm projection and stays put. What you give up is the flat bed, because Cadillac style supine work comes from a reformer carriage with a mattress converter and platform extender. This is a standing and spring station, not a table.
Mounted on a reformer, the frame turns a machine you own into a two in one. That needs a model specific reformer bracket set, sold separately, and fits A, M and C Series reformers except the C1. For that route already matched and boxed, see the C8-Pro reformer with Half Cadillac or the M8-Pro with Half Cadillac.
| Decision point | Wall mounted, this listing | Reformer mounted |
|---|---|---|
| Reformer needed | No, standalone | Yes, A, M or C Series, not the C1 |
| Extra parts | Wall fixings and bolts, sourced locally | Model specific reformer bracket set |
| Floor used | 56cm of projection | Full reformer length plus walk around space |
| Flat Cadillac bed | No | Yes, with converter and extender |
What the specs mean for you
| Specification | What it means in practice |
|---|---|
| 202.5cm H x 80.5cm W x 56cm D | Two metres of wall height, 80cm wide, intruding 56cm. A 2 metre working strip in front is comfortable |
| 189cm frame height | Sits below a standard ceiling, but allow headroom for the roll down bar arc and a standing client |
| Solid walls only | Brick, block, concrete or masonry. Confirm the substrate before ordering |
| 37.5kg assembled | The wall carries 30kg of frame and 15.7kg of bracket, plus whatever a client pulls through the springs |
| Stainless steel upper frame | Corrosion resistant and easy to wipe down in a humid room |
| 8 springs, two lengths | Standard 47cm and long 64cm, so short and long spring work needs no extra hardware |
| Ten minute frame assembly | Bolting the frame is quick. The skill and time go into fixing the bracket to the wall |
What ships with it
Supplied as a set, code PAPHALFCADA2WALLSET, so frame PAP-HALFCADA2 and bracket PAP-HALFADAPTA2 arrive together.
- Half Cadillac frame, stainless steel upper frame
- Wall unit adapter bracket, top and bottom arms
- 1 aluminium push through bar with rapid adjust height changers
- 1 maple pull down bar, 1 quick release safety strap
- 1 pair of foot straps, 1 pair of hand handles
- 2 pairs of rapid adjust double eyelet spring holders, 8 aluminium carabiners, 8 double ended dog clips
- 8 nickel plated music wire springs: 2 standard 47cm very light yellow, 2 standard 47cm medium red, 2 long 64cm light purple, 2 long 64cm strong red
Also required, sold separately
Not usable straight out of the crate. Two things come from elsewhere.
- Wall fixings and bolts. Not supplied. The correct anchor depends on the wall material, so your installer specifies them.
- A solid wall and a qualified installer. Align-Pilates recommends professional installation and does not provide it. Stud walls are excluded outright.
Optional: additional or replacement springs, and a reformer bracket set if you later move the frame onto a machine.
Call 866-861-6317, 9am to 6pm EST Monday to Friday, and we will run a wall and compatibility check before you order. Tell us what the wall is built from and what the room measures. If it is wrong for your space, we will say so.
Full specifications
| Specification | Detail |
|---|---|
| Product codes | PAP-HALFCADA2 frame with PAP-HALFADAPTA2 wall bracket, supplied together as PAPHALFCADA2WALLSET |
| Assembled dimensions | 202.5cm H x 80.5cm W x 56cm D |
| Assembled weight | 37.5 kg |
| Frame height | 189cm from floor |
| Frame weight | 30 kg |
| Wall bracket weight | 15.7 kg |
| Wall bracket depth | 56 cm |
| Frame material | Full stainless steel upper frame |
| Mounting | Wall mounted. Top and bottom bracket arms fix to the wall, not to the floor and not to a reformer |
| Wall type required | Solid walls only. Cannot be used on stud walls |
| Wall fixings | Not included. Fixings and bolts depend on your wall. Professional installation recommended |
| Reformer required | No. The wall bracket lets the Half Cadillac be used as a standalone unit |
| Springs included | 8 nickel plated music wire springs: 2x Standard 47cm Very Light (Yellow), 2x Standard 47cm Medium (Red), 2x Long 64cm Light (Purple), 2x Long 64cm Strong (Red) |
| Push through bar | Aluminium, with rapid adjust height changers |
| Pull down bar | Maple roll down bar |
| Safety strap | Quick release |
| Assembly | Limited assembly. The frame alone takes about ten minutes |
| Frame compatibility if reformer mounted instead | A, M and C Series reformers except the C1, using the model specific reformer bracket sold separately |
Delivery
Ships freight on a pallet and needs two people to move into position. Assemble it in the room where it will live, against the wall it will be fixed to. White glove delivery and in room assembly are available as a paid add on. Drilling and anchoring into the building fabric stays with your installer.
Common questions
Can I mount this on a stud wall or a plasterboard partition?
No. Align-Pilates states the unit is only suitable for solid walls and cannot be used on stud walls. That covers timber stud, metal stud and any plasterboard skin over a void. If your only free wall is stud, a reformer mounted or freestanding Cadillac is the route.
Do I need a reformer to use this?
No, and that is the point of the bracket. It attaches to the wall and works standalone. Our earlier page said this bracket attaches to A-Series and C-Series reformers. That was wrong, and this page replaces it.
Are the bolts and wall fixings in the box?
No. The right anchor depends on the wall material, its condition and local building practice, so that is left to your installer. Buy them before your delivery date.
How much room do I need in front of it?
The unit is 202.5cm high, 80.5cm wide and projects 56cm. Beyond that, allow clear floor for a client to stand, kneel and lie in front of the frame and for both bars to travel. About 2 metres out is comfortable.
Can I move the frame onto a reformer later?
Yes. It is the standard Half Cadillac frame and fits A, M and C Series reformers except the C1, using the model specific reformer bracket set, a different part sold separately. Call with your model and we will confirm it.
Everything you need to know about shipping, delivery, and returns for Align-Pilates equipment purchased through RecovAthlete. Have a question before ordering? Call 866-861-6317 or email support@recovathlete.com and we'll confirm exactly what's available for your location.
✅
Authorized Align-Pilates Dealer
RecovAthlete is an authorized dealer of Align-Pilates equipment. Every purchase is backed by the full manufacturer warranty directly from Align-Pilates and their exclusive North American distributor, Kloz Inc.
Shipping
Important
Once your order ships, the delivery address cannot be changed. If a shipment fails due to an incorrect address, return fees may apply. Inspect all equipment thoroughly upon delivery — any damage or concerns must be reported within 3 business days of receipt.
Returns Policy
Non-Returnable Items
Returns are not accepted on reformers, chairs, ladder barrels, full cadillacs, or half cadillacs — no exceptions. These items are only eligible for replacement if they arrive damaged or were shipped in error.
Accessories — 30-Day Returns
- Returns accepted within 30 days of purchase (shipping costs excluded)
- All goods must be returned in original condition
- Subject to a restocking charge
- Return shipping costs are the sole responsibility of the purchaser
Return Authorization Number (RNA) Required
All returns — for any reason — require a Return Authorization Number before sending anything back. Items returned without an RNA will not be accepted.
To obtain an RNA, contact Kloz Inc. (Align-Pilates' exclusive North American distributor) directly:
- Phone: 1-888-756-7798
- Email: info@klozinc.com
If Your Item Arrives Damaged or Defective
- Contact us within 3 business days of delivery at 866-861-6317 or support@recovathlete.com
- Provide photos and a description of the damage
- Once confirmed, we will coordinate a replacement or resolution with the distributor
Order Cancellations
- Cancel before shipment — no charge
- Cancel after shipment — 25% restocking fee plus return shipping charges apply
Warranty Overview
Align-Pilates equipment carries a multi-year manufacturer's warranty against defects in materials and workmanship. The warranty that applies depends on the product:
Maintenance Note
Reformers require regular basic maintenance and cleaning. Most issues that arise during ownership can be resolved through consistent, simple cleaning practices. Failure to follow Align-Pilates' maintenance guidelines may void the warranty. Contact us and we'll guide you through the correct maintenance routine for your machine.
Full warranty terms by product type: view the Align-Pilates Warranty page. Manufacturer warranty details also available at align-pilates.com/resources/warranty-maintenance.
Half Cadillac repertoire off a wall, with no reformer underneath it and no floor given up
The Align Pilates Half Cadillac Wall Unit with Wall Bracket bolts the Half Cadillac frame onto a solid wall and runs as a standalone apparatus. No reformer sits under it and none is used. You get push through bar, roll down bar, arm and leg spring and standing spring work from a frame 189cm off the floor that projects 56cm into the room. The usual route to this repertoire is a reformer with a tower, which commits a reformer station and a lot of floor. This one spends wall instead. Buyers often call it a Pilates tower.
Three things decide whether you can install this. Check them before you order
1. It bolts to a wall, not to a reformer. Both bracket arms fix to the wall, nothing fixes to the floor, and the bracket will not fit a reformer.
2. Solid walls only. It cannot be used on stud walls. This is the most common reason a buyer ends up unable to install. Brick, block, concrete or solid masonry is required. A stud partition with plasterboard over it will not carry the frame or the spring loads pulled through it. There is no workaround. Check the wall before you order, not after the pallet arrives.
3. Wall fixings and bolts are not supplied. The right anchor depends on what your wall is made of. Align-Pilates recommends professional installation and does not provide it, so budget for an installer to specify the fixings.
Best for, and not ideal for
Best for
- Studios with a spare solid wall that want spring work without losing a reformer
- Rooms where floor area is the constraint and wall area is not
- Physio and rehab rooms adding spring work beside existing kit
- Home studios in masonry buildings with no room for a Cadillac footprint
Not ideal for
- Rooms where the only free wall is stud and plasterboard
- Rented space where drilling structural walls is not permitted
- Buyers who want the flat Cadillac bed, which needs a reformer carriage
- Anyone needing to move or store the apparatus between sessions
Why we carry this one
Most studios reach a point where they want Half Cadillac repertoire and cannot make the floor maths work. A Full Cadillac wants a permanent bay. A reformer mounted Half Cadillac ties up a machine that was earning its keep as a reformer. This unit answers both by using vertical space that was doing nothing.
The upper frame is the one used across the Half Cadillac line: full stainless steel, an aluminium push through bar with rapid adjust height changers, a maple roll down bar, a quick release safety strap and eight springs in two lengths. This is the newer bracket generation, reworked so the whole load path goes into the wall. If your wall is not solid, the answer is a different product, not a heavier bolt.
Wall mounted against reformer mounted
The same Half Cadillac frame does both jobs. What changes is what it hangs off. On this bracket it stands alone, uses no floor beyond its 56cm projection and stays put. What you give up is the flat bed, because Cadillac style supine work comes from a reformer carriage with a mattress converter and platform extender. This is a standing and spring station, not a table.
Mounted on a reformer, the frame turns a machine you own into a two in one. That needs a model specific reformer bracket set, sold separately, and fits A, M and C Series reformers except the C1. For that route already matched and boxed, see the C8-Pro reformer with Half Cadillac or the M8-Pro with Half Cadillac.
| Decision point | Wall mounted, this listing | Reformer mounted |
|---|---|---|
| Reformer needed | No, standalone | Yes, A, M or C Series, not the C1 |
| Extra parts | Wall fixings and bolts, sourced locally | Model specific reformer bracket set |
| Floor used | 56cm of projection | Full reformer length plus walk around space |
| Flat Cadillac bed | No | Yes, with converter and extender |
What the specs mean for you
| Specification | What it means in practice |
|---|---|
| 202.5cm H x 80.5cm W x 56cm D | Two metres of wall height, 80cm wide, intruding 56cm. A 2 metre working strip in front is comfortable |
| 189cm frame height | Sits below a standard ceiling, but allow headroom for the roll down bar arc and a standing client |
| Solid walls only | Brick, block, concrete or masonry. Confirm the substrate before ordering |
| 37.5kg assembled | The wall carries 30kg of frame and 15.7kg of bracket, plus whatever a client pulls through the springs |
| Stainless steel upper frame | Corrosion resistant and easy to wipe down in a humid room |
| 8 springs, two lengths | Standard 47cm and long 64cm, so short and long spring work needs no extra hardware |
| Ten minute frame assembly | Bolting the frame is quick. The skill and time go into fixing the bracket to the wall |
What ships with it
Supplied as a set, code PAPHALFCADA2WALLSET, so frame PAP-HALFCADA2 and bracket PAP-HALFADAPTA2 arrive together.
- Half Cadillac frame, stainless steel upper frame
- Wall unit adapter bracket, top and bottom arms
- 1 aluminium push through bar with rapid adjust height changers
- 1 maple pull down bar, 1 quick release safety strap
- 1 pair of foot straps, 1 pair of hand handles
- 2 pairs of rapid adjust double eyelet spring holders, 8 aluminium carabiners, 8 double ended dog clips
- 8 nickel plated music wire springs: 2 standard 47cm very light yellow, 2 standard 47cm medium red, 2 long 64cm light purple, 2 long 64cm strong red
Also required, sold separately
Not usable straight out of the crate. Two things come from elsewhere.
- Wall fixings and bolts. Not supplied. The correct anchor depends on the wall material, so your installer specifies them.
- A solid wall and a qualified installer. Align-Pilates recommends professional installation and does not provide it. Stud walls are excluded outright.
Optional: additional or replacement springs, and a reformer bracket set if you later move the frame onto a machine.
Call 866-861-6317, 9am to 6pm EST Monday to Friday, and we will run a wall and compatibility check before you order. Tell us what the wall is built from and what the room measures. If it is wrong for your space, we will say so.
Full specifications
| Specification | Detail |
|---|---|
| Product codes | PAP-HALFCADA2 frame with PAP-HALFADAPTA2 wall bracket, supplied together as PAPHALFCADA2WALLSET |
| Assembled dimensions | 202.5cm H x 80.5cm W x 56cm D |
| Assembled weight | 37.5 kg |
| Frame height | 189cm from floor |
| Frame weight | 30 kg |
| Wall bracket weight | 15.7 kg |
| Wall bracket depth | 56 cm |
| Frame material | Full stainless steel upper frame |
| Mounting | Wall mounted. Top and bottom bracket arms fix to the wall, not to the floor and not to a reformer |
| Wall type required | Solid walls only. Cannot be used on stud walls |
| Wall fixings | Not included. Fixings and bolts depend on your wall. Professional installation recommended |
| Reformer required | No. The wall bracket lets the Half Cadillac be used as a standalone unit |
| Springs included | 8 nickel plated music wire springs: 2x Standard 47cm Very Light (Yellow), 2x Standard 47cm Medium (Red), 2x Long 64cm Light (Purple), 2x Long 64cm Strong (Red) |
| Push through bar | Aluminium, with rapid adjust height changers |
| Pull down bar | Maple roll down bar |
| Safety strap | Quick release |
| Assembly | Limited assembly. The frame alone takes about ten minutes |
| Frame compatibility if reformer mounted instead | A, M and C Series reformers except the C1, using the model specific reformer bracket sold separately |
Delivery
Ships freight on a pallet and needs two people to move into position. Assemble it in the room where it will live, against the wall it will be fixed to. White glove delivery and in room assembly are available as a paid add on. Drilling and anchoring into the building fabric stays with your installer.
Common questions
Can I mount this on a stud wall or a plasterboard partition?
No. Align-Pilates states the unit is only suitable for solid walls and cannot be used on stud walls. That covers timber stud, metal stud and any plasterboard skin over a void. If your only free wall is stud, a reformer mounted or freestanding Cadillac is the route.
Do I need a reformer to use this?
No, and that is the point of the bracket. It attaches to the wall and works standalone. Our earlier page said this bracket attaches to A-Series and C-Series reformers. That was wrong, and this page replaces it.
Are the bolts and wall fixings in the box?
No. The right anchor depends on the wall material, its condition and local building practice, so that is left to your installer. Buy them before your delivery date.
How much room do I need in front of it?
The unit is 202.5cm high, 80.5cm wide and projects 56cm. Beyond that, allow clear floor for a client to stand, kneel and lie in front of the frame and for both bars to travel. About 2 metres out is comfortable.
Can I move the frame onto a reformer later?
Yes. It is the standard Half Cadillac frame and fits A, M and C Series reformers except the C1, using the model specific reformer bracket set, a different part sold separately. Call with your model and we will confirm it.
Align-Pilates equipment is backed by manufacturer warranties issued directly by Align-Pilates Equipment Ltd. The warranty that applies to your purchase depends on the product type. All warranties are for the original purchaser only and are non-transferable.
✅
Authorized Align-Pilates Dealer
RecovAthlete is an authorized dealer of Align-Pilates equipment. All purchases qualify for full manufacturer warranty protection through Align-Pilates and their exclusive North American distributor, Kloz Inc.
Commercial Warranty — A, C & M Series Reformers
Applies to: A8-Pro, C8-Pro, C8-S Pro, C8-PRO Noir, M8-Pro, Full & Half Cadillac systems
Covers domestic and commercial usage up to 37.5 hours per week. User weight limit: 150 kg / 330 lbs. Align-Pilates will repair or replace any mechanical component that malfunctions due to defects in materials or workmanship during the warranty period.
Note: wooden frames must not be positioned next to convection radiators or air conditioning units. Springs showing signs of damage or wear must be replaced immediately regardless of age.
Light Commercial Warranty — R8-Pro & F3 Reformers
Applies to: R8-Pro (Black & White), F3 Folding Reformer
Covers domestic use and limited commercial usage up to 20 hours per week. User weight limit: 120 kg / 265 lbs. Align-Pilates will repair or replace any mechanical component that malfunctions due to defects in materials or workmanship during the warranty period.
Note: commercial use beyond 20 hours per week voids the warranty on these models.
Commercial Warranty — Combo Chairs & Ladder Barrels
Applies to: Combo Chair III, Ladder Barrel RC
Covers domestic and commercial usage up to 37.5 hours per week. User weight limit: 150 kg / 330 lbs.
Moving mechanisms include the Rapid Change Ladder Barrel and Combo Chair locking handles. Springs showing damage or wear must be replaced immediately regardless of age.
What Is Not Covered
- Normal wear and tear
- Damage from negligence, misuse, abuse, or improper maintenance
- Unauthorized modifications or repairs
- Superficial scratches to the finish
- Upholstery tears, cuts, burns, stains, or damage from improper use (jewelry, inappropriate clothing)
- Rust from improper storage — store in a clean, dry environment; in coastal areas, wipe down regularly and minimize exposure to sea air
- Shipping costs, customs fees, or installation costs for warranty parts
- Equipment used outside of recognized Pilates repertoire
Warranty Claim Procedure
- Contact us at 866-861-6317 or support@recovathlete.com to initiate a claim
- We will contact Align-Pilates or their authorized North American distributor on your behalf
- A return authorization number (RNA) will be issued if a return is required — items returned without an RNA will not be accepted
- You are responsible for the cost of shipping the item back for inspection
- Parts repaired or replaced under warranty are covered for the remainder of the original warranty period only
Full manufacturer warranty terms: align-pilates.com/resources/warranty-maintenance
Let customers speak for us
Have Questions? Talk to Our Equipment Team.
We respond within 2 hours.
US & Canada shipping. Financing available.
- Choosing a selection results in a full page refresh.