866-861-6317
Ask an Expert
Align Pilates C8-Pro Pilates Reformer with Half Cadillac
Ships within 12.0 business days | $650 Shipping
- Regular price
- $5,255.00
- Regular price
-
- Sale price
- $5,255.00
- Unit price
- per
Shipping $650
12.0
Description
The whole Half Cadillac repertoire in one bundle, with nothing left to order after
The Align Pilates C8-Pro Pilates Reformer with Half Cadillac arrives as a complete setup, not a machine plus a shopping list. In the box: the C8-Pro reformer on its oversize aluminium profile frame, the Half Cadillac frame, the bracket set cut for this series, the 42cm leg extensions the conversion requires, a mattress converter, a platform extender, a frame sitting box and a 60 inch gondola pole.
Align calls this attachment a Half Cadillac, and that is the name on the parts list, though buyers shopping for a reformer with a tower usually mean this exact piece. It mounts at the headrest end and carries the push through bar, roll down bar, safety strap, foot straps, hand handles, spring holders and long springs. If you want the machine without it, we sell the C8-Pro reformer on its own.
Check your ceiling before you order
Assembled height with the leg extensions and Half Cadillac fitted is 205cm, a little under 7 feet, and that is the frame alone. Add clearance above it for the roll down bar to swing through its arc and for a standing client on the arm springs. Measure to the lowest obstruction in the room, not to the highest point of the ceiling. Beams, light fittings and ductwork are what catch people out. Floor footprint is 244cm by 66cm.
Best for, and not ideal for
Best for
- Studios that want Cadillac repertoire in a room that still holds other equipment
- One to one and small group teaching built around push through bar and roll down bar work
- Buyers outfitting from scratch who would rather not chase brackets and converters as separate line items
- Home studios with a permanent room, a level floor and the height to match
Not ideal for
- Rooms with less than 205cm of clear height to the lowest obstruction, plus clearance above that
- Anyone who needs trapeze or overhead canopy work, that is Full Cadillac territory
- Studios that fold or stand machines away between classes, the C8-Pro does neither
- Clients outside the 145cm to 193cm height range Align specifies for this reformer
Why we carry this one
The question we get asked most here is Half Cadillac against Full Cadillac. The Half Cadillac is a single upright assembly at one end of the reformer. It gives you the push through bar, the roll down bar, arm and leg spring work, and with the converter and extender fitted, a flat bed for supine Cadillac work. The room stays open and one instructor can work all the way around the machine. The Full Cadillac is a four poster frame with an overhead canopy. It adds trapeze and hanging work a half frame cannot do, and asks for a good deal more floor area and height in return. If trapeze is on your programme, go to the C8-Pro Cadillac reformer combo and budget the space for it.
For everyone else the half frame is the honest answer, because most studio Cadillac programming is push through bar, roll down bar and spring work. The C8-Pro underneath is a commercial reformer, independently tested to EN ISO 20957-1:2013, and the Half Cadillac upper frame is stainless steel rather than chromed steel.
What the specs mean for you
| Specification | What it means in practice |
|---|---|
| 42cm leg extensions included | A requirement, not an upgrade. The Half Cadillac only works with the reformer raised, and the extensions give the rope risers their full range of positions |
| 205cm assembled height | Sets your minimum room. Measure to the lowest thing hanging from the ceiling and leave clearance above the frame for the roll down bar arc |
| 106.5cm carriage travel | Long enough that a 6 foot client reaches full leg extension without running out of track |
| 92cm x 58cm carriage | Standard studio width. Stable for kneeling and side lying, and narrow enough to hold the footprint at 66cm |
| 8 PU wheels on anodised aluminium runners | Quiet under load and close to maintenance free through a commercial duty cycle |
| Rapid Change spring bar | Spring load changes with one hand, springs still attached. A few seconds per transition is real teaching time across a class |
| 8 springs in two lengths | 47cm standard springs cover reformer work, 64cm long springs cover the Half Cadillac. No re-rigging to switch modes |
| 150kg maximum user weight | Rated for commercial use across a normal adult client range, with a stated height range of 145cm to 193cm |
What ships with it
- C8-Pro Pilates reformer
- Half Cadillac frame with a stainless steel upper frame, and the bracket set for this reformer series
- 42cm leg extensions, required to raise the reformer
- Mattress converter and platform extender for flat bed conversion
- Frame sitting box
- 60 inch maple gondola pole
- Push through bar, roll down bar, safety strap, one pair of foot straps, one pair of hand handles
- Two pairs of double eyelet spring holders, 8 carabiners, 8 double ended dog clips
- 8 nickel plated music wire springs: 2 standard very light, 2 standard medium, 2 long light, 2 long strong
Sold separately
- Replacement and additional springs in both the 47cm standard and 64cm long lengths
- Bracket sets and leg extensions for other Align-Pilates reformers, if you are fitting a half frame to a machine you own
Call 866-861-6317 between 9am and 6pm EST, Monday to Friday, if you want a component checked against your existing setup before ordering. White glove delivery and in room assembly are available as a paid add on.
Full specifications
| Specification | Detail |
|---|---|
| Product code | PAPC8HALFCAD |
| Frame | Oversize aluminium profile. Half Cadillac has a full stainless steel upper frame |
| Dimensions | 244cm L x 66cm W x 26cm H (reformer alone, standard legs) |
| Dimensions with Half Cadillac | 244cm L x 66cm W x 205cm H (extensions and Half Cadillac fitted) |
| Carriage size | 92cm L x 58cm W |
| Carriage travel | 106.5 cm |
| Reformer weight | 66 kg |
| Wheels | 8 PU wheels on precision anodised aluminium runners |
| Spring bar | Patent pending Rapid Change (RC), one hand, springs attached |
| Springs included | 8 nickel plated music wire: 2x 47cm very light, 2x 47cm medium, 2x 64cm light, 2x 64cm strong |
| Footbar | Oversize aluminium, 4 lockable positions including flat |
| Head rest | 3 positions |
| Shoulder rests | Removable and lockable, off centred for two widths |
| Rope adjustment | Pro Rope Adjusters at the headrest |
| Rope risers | Removable, painted, outside frame, 7 height positions with the extension legs |
| Adjustable feet | Yes |
| Maximum user weight | 150 kg, users 145cm to 193cm |
| Half Cadillac fittings | Push through bar, roll down bar, safety strap, foot straps, hand handles, 2 pairs double eyelet spring holders, 8 carabiners, 8 dog clips |
| Compatibility | Sold as a complete bundle. The Half Cadillac mounts to the C8-Pro via the model specific bracket set and the reformer must be raised on the 42cm leg extensions, both included here |
| Certification | Independently tested to EN ISO 20957-1:2013 |
Delivery
This bundle ships freight on a pallet and arrives partially assembled. Plan for two people to move it into position and assemble it in the room where it will live. Carrying a built machine through a doorway is not realistic. Align-Pilates publishes an assembly guide for the C8-Pro and a second one for the Half Cadillac, and we send both links with your order confirmation.
Common questions
Can I add the Half Cadillac to a C8-Pro I already own?
Yes. The half frame retrofits to an existing C8-Pro, but the bracket set is series specific and will not cross over from another Align-Pilates model. You also need the 42cm leg extensions, the mattress converter and the platform extender. Call 866-861-6317 and we will confirm the part list against your machine first.
What is the difference between the Half Cadillac and the Full Cadillac?
The Half Cadillac is one upright assembly at the end of the reformer. It gives you push through bar, roll down bar and spring work, and keeps the room open. The Full Cadillac is a four poster frame with an overhead canopy. It adds trapeze and hanging work but needs more floor space and height. If trapeze is part of your teaching, buy the Cadillac reformer combo instead.
What ceiling height do I actually need?
Assembled height is 205cm. Allow clearance above that for the roll down bar arc and for a standing client on the arm springs. Measure to the lowest obstruction in the room, not the highest point of the ceiling.
Do the leg extensions change how the reformer feels?
They raise the whole machine, so the carriage sits higher than a standard C8-Pro. Most instructors prefer that for getting clients on and off, and the extensions give the rope risers their full set of 7 height positions. They are not optional on this bundle.
Is it rated for commercial studio use?
Yes. The C8-Pro is independently tested to EN ISO 20957-1:2013, maximum user weight 150kg, with a stated user height range of 145cm to 193cm.
120% Price Match
Financing
Shipping
Warranty
The whole Half Cadillac repertoire in one bundle, with nothing left to order after
The Align Pilates C8-Pro Pilates Reformer with Half Cadillac arrives as a complete setup, not a machine plus a shopping list. In the box: the C8-Pro reformer on its oversize aluminium profile frame, the Half Cadillac frame, the bracket set cut for this series, the 42cm leg extensions the conversion requires, a mattress converter, a platform extender, a frame sitting box and a 60 inch gondola pole.
Align calls this attachment a Half Cadillac, and that is the name on the parts list, though buyers shopping for a reformer with a tower usually mean this exact piece. It mounts at the headrest end and carries the push through bar, roll down bar, safety strap, foot straps, hand handles, spring holders and long springs. If you want the machine without it, we sell the C8-Pro reformer on its own.
Check your ceiling before you order
Assembled height with the leg extensions and Half Cadillac fitted is 205cm, a little under 7 feet, and that is the frame alone. Add clearance above it for the roll down bar to swing through its arc and for a standing client on the arm springs. Measure to the lowest obstruction in the room, not to the highest point of the ceiling. Beams, light fittings and ductwork are what catch people out. Floor footprint is 244cm by 66cm.
Best for, and not ideal for
Best for
- Studios that want Cadillac repertoire in a room that still holds other equipment
- One to one and small group teaching built around push through bar and roll down bar work
- Buyers outfitting from scratch who would rather not chase brackets and converters as separate line items
- Home studios with a permanent room, a level floor and the height to match
Not ideal for
- Rooms with less than 205cm of clear height to the lowest obstruction, plus clearance above that
- Anyone who needs trapeze or overhead canopy work, that is Full Cadillac territory
- Studios that fold or stand machines away between classes, the C8-Pro does neither
- Clients outside the 145cm to 193cm height range Align specifies for this reformer
Why we carry this one
The question we get asked most here is Half Cadillac against Full Cadillac. The Half Cadillac is a single upright assembly at one end of the reformer. It gives you the push through bar, the roll down bar, arm and leg spring work, and with the converter and extender fitted, a flat bed for supine Cadillac work. The room stays open and one instructor can work all the way around the machine. The Full Cadillac is a four poster frame with an overhead canopy. It adds trapeze and hanging work a half frame cannot do, and asks for a good deal more floor area and height in return. If trapeze is on your programme, go to the C8-Pro Cadillac reformer combo and budget the space for it.
For everyone else the half frame is the honest answer, because most studio Cadillac programming is push through bar, roll down bar and spring work. The C8-Pro underneath is a commercial reformer, independently tested to EN ISO 20957-1:2013, and the Half Cadillac upper frame is stainless steel rather than chromed steel.
What the specs mean for you
| Specification | What it means in practice |
|---|---|
| 42cm leg extensions included | A requirement, not an upgrade. The Half Cadillac only works with the reformer raised, and the extensions give the rope risers their full range of positions |
| 205cm assembled height | Sets your minimum room. Measure to the lowest thing hanging from the ceiling and leave clearance above the frame for the roll down bar arc |
| 106.5cm carriage travel | Long enough that a 6 foot client reaches full leg extension without running out of track |
| 92cm x 58cm carriage | Standard studio width. Stable for kneeling and side lying, and narrow enough to hold the footprint at 66cm |
| 8 PU wheels on anodised aluminium runners | Quiet under load and close to maintenance free through a commercial duty cycle |
| Rapid Change spring bar | Spring load changes with one hand, springs still attached. A few seconds per transition is real teaching time across a class |
| 8 springs in two lengths | 47cm standard springs cover reformer work, 64cm long springs cover the Half Cadillac. No re-rigging to switch modes |
| 150kg maximum user weight | Rated for commercial use across a normal adult client range, with a stated height range of 145cm to 193cm |
What ships with it
- C8-Pro Pilates reformer
- Half Cadillac frame with a stainless steel upper frame, and the bracket set for this reformer series
- 42cm leg extensions, required to raise the reformer
- Mattress converter and platform extender for flat bed conversion
- Frame sitting box
- 60 inch maple gondola pole
- Push through bar, roll down bar, safety strap, one pair of foot straps, one pair of hand handles
- Two pairs of double eyelet spring holders, 8 carabiners, 8 double ended dog clips
- 8 nickel plated music wire springs: 2 standard very light, 2 standard medium, 2 long light, 2 long strong
Sold separately
- Replacement and additional springs in both the 47cm standard and 64cm long lengths
- Bracket sets and leg extensions for other Align-Pilates reformers, if you are fitting a half frame to a machine you own
Call 866-861-6317 between 9am and 6pm EST, Monday to Friday, if you want a component checked against your existing setup before ordering. White glove delivery and in room assembly are available as a paid add on.
Full specifications
| Specification | Detail |
|---|---|
| Product code | PAPC8HALFCAD |
| Frame | Oversize aluminium profile. Half Cadillac has a full stainless steel upper frame |
| Dimensions | 244cm L x 66cm W x 26cm H (reformer alone, standard legs) |
| Dimensions with Half Cadillac | 244cm L x 66cm W x 205cm H (extensions and Half Cadillac fitted) |
| Carriage size | 92cm L x 58cm W |
| Carriage travel | 106.5 cm |
| Reformer weight | 66 kg |
| Wheels | 8 PU wheels on precision anodised aluminium runners |
| Spring bar | Patent pending Rapid Change (RC), one hand, springs attached |
| Springs included | 8 nickel plated music wire: 2x 47cm very light, 2x 47cm medium, 2x 64cm light, 2x 64cm strong |
| Footbar | Oversize aluminium, 4 lockable positions including flat |
| Head rest | 3 positions |
| Shoulder rests | Removable and lockable, off centred for two widths |
| Rope adjustment | Pro Rope Adjusters at the headrest |
| Rope risers | Removable, painted, outside frame, 7 height positions with the extension legs |
| Adjustable feet | Yes |
| Maximum user weight | 150 kg, users 145cm to 193cm |
| Half Cadillac fittings | Push through bar, roll down bar, safety strap, foot straps, hand handles, 2 pairs double eyelet spring holders, 8 carabiners, 8 dog clips |
| Compatibility | Sold as a complete bundle. The Half Cadillac mounts to the C8-Pro via the model specific bracket set and the reformer must be raised on the 42cm leg extensions, both included here |
| Certification | Independently tested to EN ISO 20957-1:2013 |
Delivery
This bundle ships freight on a pallet and arrives partially assembled. Plan for two people to move it into position and assemble it in the room where it will live. Carrying a built machine through a doorway is not realistic. Align-Pilates publishes an assembly guide for the C8-Pro and a second one for the Half Cadillac, and we send both links with your order confirmation.
Common questions
Can I add the Half Cadillac to a C8-Pro I already own?
Yes. The half frame retrofits to an existing C8-Pro, but the bracket set is series specific and will not cross over from another Align-Pilates model. You also need the 42cm leg extensions, the mattress converter and the platform extender. Call 866-861-6317 and we will confirm the part list against your machine first.
What is the difference between the Half Cadillac and the Full Cadillac?
The Half Cadillac is one upright assembly at the end of the reformer. It gives you push through bar, roll down bar and spring work, and keeps the room open. The Full Cadillac is a four poster frame with an overhead canopy. It adds trapeze and hanging work but needs more floor space and height. If trapeze is part of your teaching, buy the Cadillac reformer combo instead.
What ceiling height do I actually need?
Assembled height is 205cm. Allow clearance above that for the roll down bar arc and for a standing client on the arm springs. Measure to the lowest obstruction in the room, not the highest point of the ceiling.
Do the leg extensions change how the reformer feels?
They raise the whole machine, so the carriage sits higher than a standard C8-Pro. Most instructors prefer that for getting clients on and off, and the extensions give the rope risers their full set of 7 height positions. They are not optional on this bundle.
Is it rated for commercial studio use?
Yes. The C8-Pro is independently tested to EN ISO 20957-1:2013, maximum user weight 150kg, with a stated user height range of 145cm to 193cm.
RecovAthlete's 120% Price Match Guarantee: Shop With Unmatched Confidence
At RecovAthlete, we're here to support your recovery and performance goals, without overpaying. Our 120% Price Match Guarantee makes sure you always get the best deal. If you find a lower price, not only will we match it, we'll beat it by adding 20% of the price difference back to your refund.
How It Works
- 60-Day Window: If you find the same item at a lower price from an authorized competitor within 60 days of your purchase, we'll match it.
- We Add 20%: Besides matching the price, we give you 20% of the difference back.
- Same Currency: Price comparisons must be in the same currency as your original purchase.
- MAP Policy Required: The competitor must be an authorized dealer of the product and follow a Minimum Advertised Price (MAP) policy set by the manufacturer.
Terms and Conditions
- Eligible Products: Must be the same model, SKU, and from an authorized seller.
- Verifiable Prices: We compare total verifiable selling prices (excluding taxes), including shipping.
- Manual Review: Our team reviews all claims for validity and eligibility.
Exclusions
- Used, refurbished, or secondary-market products
- Wholesale, contract, or below-cost pricing
- Marketplace sellers (Amazon, Walmart, Costco, etc.)
- Flash sales, closeouts, clearance, or limited-time promos
- Price matches can't be combined with other RecovAthlete discounts or offers
Our Ethical Pricing Pledge
We don't undercut manufacturers or sell below cost. We follow ethical pricing standards prioritizing fairness, brand integrity, and long-term trust.
How to Submit a Claim
- Get Proof: A screenshot, ad, or live link showing the competitor's lower price.
- Send Details: Include your order number, the product name, and the competitor info.
- Submit via Contact Page: contact the RecovAthlete team.
- Processing: Allow up to 6 weeks for verification and refund processing.
With our 120% Price Match Guarantee, you can shop knowing you'll never miss out on a better deal, because we'll beat it.
The whole Half Cadillac repertoire in one bundle, with nothing left to order after
The Align Pilates C8-Pro Pilates Reformer with Half Cadillac arrives as a complete setup, not a machine plus a shopping list. In the box: the C8-Pro reformer on its oversize aluminium profile frame, the Half Cadillac frame, the bracket set cut for this series, the 42cm leg extensions the conversion requires, a mattress converter, a platform extender, a frame sitting box and a 60 inch gondola pole.
Align calls this attachment a Half Cadillac, and that is the name on the parts list, though buyers shopping for a reformer with a tower usually mean this exact piece. It mounts at the headrest end and carries the push through bar, roll down bar, safety strap, foot straps, hand handles, spring holders and long springs. If you want the machine without it, we sell the C8-Pro reformer on its own.
Check your ceiling before you order
Assembled height with the leg extensions and Half Cadillac fitted is 205cm, a little under 7 feet, and that is the frame alone. Add clearance above it for the roll down bar to swing through its arc and for a standing client on the arm springs. Measure to the lowest obstruction in the room, not to the highest point of the ceiling. Beams, light fittings and ductwork are what catch people out. Floor footprint is 244cm by 66cm.
Best for, and not ideal for
Best for
- Studios that want Cadillac repertoire in a room that still holds other equipment
- One to one and small group teaching built around push through bar and roll down bar work
- Buyers outfitting from scratch who would rather not chase brackets and converters as separate line items
- Home studios with a permanent room, a level floor and the height to match
Not ideal for
- Rooms with less than 205cm of clear height to the lowest obstruction, plus clearance above that
- Anyone who needs trapeze or overhead canopy work, that is Full Cadillac territory
- Studios that fold or stand machines away between classes, the C8-Pro does neither
- Clients outside the 145cm to 193cm height range Align specifies for this reformer
Why we carry this one
The question we get asked most here is Half Cadillac against Full Cadillac. The Half Cadillac is a single upright assembly at one end of the reformer. It gives you the push through bar, the roll down bar, arm and leg spring work, and with the converter and extender fitted, a flat bed for supine Cadillac work. The room stays open and one instructor can work all the way around the machine. The Full Cadillac is a four poster frame with an overhead canopy. It adds trapeze and hanging work a half frame cannot do, and asks for a good deal more floor area and height in return. If trapeze is on your programme, go to the C8-Pro Cadillac reformer combo and budget the space for it.
For everyone else the half frame is the honest answer, because most studio Cadillac programming is push through bar, roll down bar and spring work. The C8-Pro underneath is a commercial reformer, independently tested to EN ISO 20957-1:2013, and the Half Cadillac upper frame is stainless steel rather than chromed steel.
What the specs mean for you
| Specification | What it means in practice |
|---|---|
| 42cm leg extensions included | A requirement, not an upgrade. The Half Cadillac only works with the reformer raised, and the extensions give the rope risers their full range of positions |
| 205cm assembled height | Sets your minimum room. Measure to the lowest thing hanging from the ceiling and leave clearance above the frame for the roll down bar arc |
| 106.5cm carriage travel | Long enough that a 6 foot client reaches full leg extension without running out of track |
| 92cm x 58cm carriage | Standard studio width. Stable for kneeling and side lying, and narrow enough to hold the footprint at 66cm |
| 8 PU wheels on anodised aluminium runners | Quiet under load and close to maintenance free through a commercial duty cycle |
| Rapid Change spring bar | Spring load changes with one hand, springs still attached. A few seconds per transition is real teaching time across a class |
| 8 springs in two lengths | 47cm standard springs cover reformer work, 64cm long springs cover the Half Cadillac. No re-rigging to switch modes |
| 150kg maximum user weight | Rated for commercial use across a normal adult client range, with a stated height range of 145cm to 193cm |
What ships with it
- C8-Pro Pilates reformer
- Half Cadillac frame with a stainless steel upper frame, and the bracket set for this reformer series
- 42cm leg extensions, required to raise the reformer
- Mattress converter and platform extender for flat bed conversion
- Frame sitting box
- 60 inch maple gondola pole
- Push through bar, roll down bar, safety strap, one pair of foot straps, one pair of hand handles
- Two pairs of double eyelet spring holders, 8 carabiners, 8 double ended dog clips
- 8 nickel plated music wire springs: 2 standard very light, 2 standard medium, 2 long light, 2 long strong
Sold separately
- Replacement and additional springs in both the 47cm standard and 64cm long lengths
- Bracket sets and leg extensions for other Align-Pilates reformers, if you are fitting a half frame to a machine you own
Call 866-861-6317 between 9am and 6pm EST, Monday to Friday, if you want a component checked against your existing setup before ordering. White glove delivery and in room assembly are available as a paid add on.
Full specifications
| Specification | Detail |
|---|---|
| Product code | PAPC8HALFCAD |
| Frame | Oversize aluminium profile. Half Cadillac has a full stainless steel upper frame |
| Dimensions | 244cm L x 66cm W x 26cm H (reformer alone, standard legs) |
| Dimensions with Half Cadillac | 244cm L x 66cm W x 205cm H (extensions and Half Cadillac fitted) |
| Carriage size | 92cm L x 58cm W |
| Carriage travel | 106.5 cm |
| Reformer weight | 66 kg |
| Wheels | 8 PU wheels on precision anodised aluminium runners |
| Spring bar | Patent pending Rapid Change (RC), one hand, springs attached |
| Springs included | 8 nickel plated music wire: 2x 47cm very light, 2x 47cm medium, 2x 64cm light, 2x 64cm strong |
| Footbar | Oversize aluminium, 4 lockable positions including flat |
| Head rest | 3 positions |
| Shoulder rests | Removable and lockable, off centred for two widths |
| Rope adjustment | Pro Rope Adjusters at the headrest |
| Rope risers | Removable, painted, outside frame, 7 height positions with the extension legs |
| Adjustable feet | Yes |
| Maximum user weight | 150 kg, users 145cm to 193cm |
| Half Cadillac fittings | Push through bar, roll down bar, safety strap, foot straps, hand handles, 2 pairs double eyelet spring holders, 8 carabiners, 8 dog clips |
| Compatibility | Sold as a complete bundle. The Half Cadillac mounts to the C8-Pro via the model specific bracket set and the reformer must be raised on the 42cm leg extensions, both included here |
| Certification | Independently tested to EN ISO 20957-1:2013 |
Delivery
This bundle ships freight on a pallet and arrives partially assembled. Plan for two people to move it into position and assemble it in the room where it will live. Carrying a built machine through a doorway is not realistic. Align-Pilates publishes an assembly guide for the C8-Pro and a second one for the Half Cadillac, and we send both links with your order confirmation.
Common questions
Can I add the Half Cadillac to a C8-Pro I already own?
Yes. The half frame retrofits to an existing C8-Pro, but the bracket set is series specific and will not cross over from another Align-Pilates model. You also need the 42cm leg extensions, the mattress converter and the platform extender. Call 866-861-6317 and we will confirm the part list against your machine first.
What is the difference between the Half Cadillac and the Full Cadillac?
The Half Cadillac is one upright assembly at the end of the reformer. It gives you push through bar, roll down bar and spring work, and keeps the room open. The Full Cadillac is a four poster frame with an overhead canopy. It adds trapeze and hanging work but needs more floor space and height. If trapeze is part of your teaching, buy the Cadillac reformer combo instead.
What ceiling height do I actually need?
Assembled height is 205cm. Allow clearance above that for the roll down bar arc and for a standing client on the arm springs. Measure to the lowest obstruction in the room, not the highest point of the ceiling.
Do the leg extensions change how the reformer feels?
They raise the whole machine, so the carriage sits higher than a standard C8-Pro. Most instructors prefer that for getting clients on and off, and the extensions give the rope risers their full set of 7 height positions. They are not optional on this bundle.
Is it rated for commercial studio use?
Yes. The C8-Pro is independently tested to EN ISO 20957-1:2013, maximum user weight 150kg, with a stated user height range of 145cm to 193cm.
Financing for Recovery and Fitness Equipment
Buying for yourself, spread the cost through Affirm at checkout. Buying for a gym, clinic, spa, or studio, apply with one of four business lenders and put the whole room on a single application.
RecovAthlete has no control over any financing decision. Approval is based on your creditworthiness and is solely the lender's decision.
Personal purchase
Affirm at checkout. Rates run 0% to 36% APR based on your credit profile. Soft check to prequalify, so no impact on your score. No prepayment penalty.
Business purchase
Brickhouse Capital, Reliant Capital, Acorn Finance, or KWIPPED. Apply with two of the four and compare. Financed equipment can qualify for a Section 179 deduction. Confirm with your accountant.
Financing by Equipment Category
Every page below has real prices, real monthly payment examples, and the lender comparison for that category. Pick the one you are buying.
Hyperbaric Chamber Financing
Soft-shell and hard-shell HBOT chambers. Session-volume payback math for clinics.
Sauna Financing
Infrared, traditional, barrel, and commercial saunas.
Cold Plunge Financing
Home tubs through commercial chillers and Medical Frozen units.
Red Light Therapy Financing
Panels, pods, and full-body beds for home and clinic.
PEMF Therapy Financing
PEMF mats, systems, and practitioner devices.
Vibration Plate Financing
Whole body vibration platforms for home, studio, and clinic.
Gym Equipment Financing
Home gyms through full commercial strength floors. Finance the floor, not the machine.
Treadmill Financing
Walking pads, commercial belts, and self-powered curved decks.
Commercial Recovery Equipment Financing
Building a recovery room? One quote, one purchase order, one application.
Building a Recovery Room?
Most business buyers are not buying one machine. They are building a room. Sauna, cold plunge, red light, vibration, hyperbaric, cryotherapy, and halotherapy all finance on the same paper through the same four lenders, and RecovAthlete quotes every category on one purchase order.
That means one freight schedule, one install window, and one financing application instead of six. It also gets you a better rate, because a bigger number on one application beats six small ones with six hard inquiries.
See commercial recovery equipment financing, or call 866-861-6317 and we will price the room.
Which Lender Should You Apply With?
| Lender | Type | Amount | Speed | Best for |
|---|---|---|---|---|
| Affirm | Consumer, at checkout | Order total | Seconds | Personal purchases. 0% to 36% APR based on credit. Soft check to prequalify. |
| Brickhouse Capital | Direct equipment lender | Up to $250K on a one-page application, $1M+ with financials | ~24 hours | A full room or a full floor. Credit decisions made in-house. Tied to the business, not your personal credit report. |
| Reliant Capital | Lender and broker | Up to $500K application-only, $5M with financials | 2 to 4 hours | Medical, aesthetic, and wellness. Deferred payment options. New or used equipment. |
| Acorn Finance | Lending marketplace | $1,000 to $100,000 | 60 seconds to prequalify | Comparing offers. One application goes to 30 or more lenders with no impact to your score. |
| KWIPPED (APPROVE) | Lender marketplace | Minimum $1,500 equipment value | 60-second application | Larger commercial orders. Lenders compete, which usually returns the best APR. Businesses only. |
Apply with two of the four and compare. It costs nothing and the spread between offers is often significant.
Apply now
Apply with Brickhouse Capital
Apply with Reliant Capital
Check your offers with Acorn Finance
For KWIPPED, call 866-861-6317 or email info@recovathlete.com and we will build the application around your order.
Financing Questions
What are Affirm's rates?
Pay in 4 splits the purchase into four interest-free payments charged every two weeks. Monthly installments spread the cost over a longer term, with rates from 0% to 36% APR depending on your credit profile. You see the exact terms before you agree to anything. No origination fees, no prepayment penalty, no late fees.
Will applying hurt my credit score?
Prequalification does not. Affirm and Acorn Finance both run a soft check to show you offers, which has no impact on your score. Proceeding with a monthly installment plan or a business loan may involve a hard inquiry. That is why it pays to prequalify with more than one lender first and only proceed with the best offer.
Can I finance equipment for a business?
Yes, and for most business buyers it is the better route. Brickhouse funds up to $250,000 on a one-page application with no financial statements. Reliant approves in 2 to 4 hours. Business financing is usually tied to the business rather than your personal credit report, and financed equipment can qualify for a Section 179 deduction. Confirm the tax position with your accountant.
Should I finance each machine separately?
No. This is the most common and most expensive mistake. Separate applications mean separate hard inquiries, separate payments, and a worse rate on each, because every individual ticket is small. Get one quote from RecovAthlete covering everything you are buying, including freight, and put that single number on one application.
Does Section 179 apply to financed equipment?
Financed equipment can qualify. Section 179 lets US businesses deduct the cost of qualifying equipment in the year it is placed in service, and financing the purchase does not by itself disqualify it. The equipment must be in service, not merely ordered, within the tax year. Annual limits and eligibility rules are set by the IRS and change year to year, so consult your accountant.
Can freight and installation be financed?
Freight, yes. On Affirm it is part of the order total at checkout. On business financing, put freight on the RecovAthlete quote and the whole quote amount goes on the application. Installation and room construction are harder, because some equipment lenders will not fund non-equipment costs. Ask the lender before you sign.
Can I pay off early?
Yes. Affirm charges no prepayment penalties. Acorn Finance and most business lenders also allow early payoff without penalty.
Not sure which option fits?
Tell us what you are buying and whether it is personal or for a business. We will point you at the right two lenders and quote freight and install as one number, which is also the number that goes on the application.
Call 866-861-6317 Book a 30 minute callThe whole Half Cadillac repertoire in one bundle, with nothing left to order after
The Align Pilates C8-Pro Pilates Reformer with Half Cadillac arrives as a complete setup, not a machine plus a shopping list. In the box: the C8-Pro reformer on its oversize aluminium profile frame, the Half Cadillac frame, the bracket set cut for this series, the 42cm leg extensions the conversion requires, a mattress converter, a platform extender, a frame sitting box and a 60 inch gondola pole.
Align calls this attachment a Half Cadillac, and that is the name on the parts list, though buyers shopping for a reformer with a tower usually mean this exact piece. It mounts at the headrest end and carries the push through bar, roll down bar, safety strap, foot straps, hand handles, spring holders and long springs. If you want the machine without it, we sell the C8-Pro reformer on its own.
Check your ceiling before you order
Assembled height with the leg extensions and Half Cadillac fitted is 205cm, a little under 7 feet, and that is the frame alone. Add clearance above it for the roll down bar to swing through its arc and for a standing client on the arm springs. Measure to the lowest obstruction in the room, not to the highest point of the ceiling. Beams, light fittings and ductwork are what catch people out. Floor footprint is 244cm by 66cm.
Best for, and not ideal for
Best for
- Studios that want Cadillac repertoire in a room that still holds other equipment
- One to one and small group teaching built around push through bar and roll down bar work
- Buyers outfitting from scratch who would rather not chase brackets and converters as separate line items
- Home studios with a permanent room, a level floor and the height to match
Not ideal for
- Rooms with less than 205cm of clear height to the lowest obstruction, plus clearance above that
- Anyone who needs trapeze or overhead canopy work, that is Full Cadillac territory
- Studios that fold or stand machines away between classes, the C8-Pro does neither
- Clients outside the 145cm to 193cm height range Align specifies for this reformer
Why we carry this one
The question we get asked most here is Half Cadillac against Full Cadillac. The Half Cadillac is a single upright assembly at one end of the reformer. It gives you the push through bar, the roll down bar, arm and leg spring work, and with the converter and extender fitted, a flat bed for supine Cadillac work. The room stays open and one instructor can work all the way around the machine. The Full Cadillac is a four poster frame with an overhead canopy. It adds trapeze and hanging work a half frame cannot do, and asks for a good deal more floor area and height in return. If trapeze is on your programme, go to the C8-Pro Cadillac reformer combo and budget the space for it.
For everyone else the half frame is the honest answer, because most studio Cadillac programming is push through bar, roll down bar and spring work. The C8-Pro underneath is a commercial reformer, independently tested to EN ISO 20957-1:2013, and the Half Cadillac upper frame is stainless steel rather than chromed steel.
What the specs mean for you
| Specification | What it means in practice |
|---|---|
| 42cm leg extensions included | A requirement, not an upgrade. The Half Cadillac only works with the reformer raised, and the extensions give the rope risers their full range of positions |
| 205cm assembled height | Sets your minimum room. Measure to the lowest thing hanging from the ceiling and leave clearance above the frame for the roll down bar arc |
| 106.5cm carriage travel | Long enough that a 6 foot client reaches full leg extension without running out of track |
| 92cm x 58cm carriage | Standard studio width. Stable for kneeling and side lying, and narrow enough to hold the footprint at 66cm |
| 8 PU wheels on anodised aluminium runners | Quiet under load and close to maintenance free through a commercial duty cycle |
| Rapid Change spring bar | Spring load changes with one hand, springs still attached. A few seconds per transition is real teaching time across a class |
| 8 springs in two lengths | 47cm standard springs cover reformer work, 64cm long springs cover the Half Cadillac. No re-rigging to switch modes |
| 150kg maximum user weight | Rated for commercial use across a normal adult client range, with a stated height range of 145cm to 193cm |
What ships with it
- C8-Pro Pilates reformer
- Half Cadillac frame with a stainless steel upper frame, and the bracket set for this reformer series
- 42cm leg extensions, required to raise the reformer
- Mattress converter and platform extender for flat bed conversion
- Frame sitting box
- 60 inch maple gondola pole
- Push through bar, roll down bar, safety strap, one pair of foot straps, one pair of hand handles
- Two pairs of double eyelet spring holders, 8 carabiners, 8 double ended dog clips
- 8 nickel plated music wire springs: 2 standard very light, 2 standard medium, 2 long light, 2 long strong
Sold separately
- Replacement and additional springs in both the 47cm standard and 64cm long lengths
- Bracket sets and leg extensions for other Align-Pilates reformers, if you are fitting a half frame to a machine you own
Call 866-861-6317 between 9am and 6pm EST, Monday to Friday, if you want a component checked against your existing setup before ordering. White glove delivery and in room assembly are available as a paid add on.
Full specifications
| Specification | Detail |
|---|---|
| Product code | PAPC8HALFCAD |
| Frame | Oversize aluminium profile. Half Cadillac has a full stainless steel upper frame |
| Dimensions | 244cm L x 66cm W x 26cm H (reformer alone, standard legs) |
| Dimensions with Half Cadillac | 244cm L x 66cm W x 205cm H (extensions and Half Cadillac fitted) |
| Carriage size | 92cm L x 58cm W |
| Carriage travel | 106.5 cm |
| Reformer weight | 66 kg |
| Wheels | 8 PU wheels on precision anodised aluminium runners |
| Spring bar | Patent pending Rapid Change (RC), one hand, springs attached |
| Springs included | 8 nickel plated music wire: 2x 47cm very light, 2x 47cm medium, 2x 64cm light, 2x 64cm strong |
| Footbar | Oversize aluminium, 4 lockable positions including flat |
| Head rest | 3 positions |
| Shoulder rests | Removable and lockable, off centred for two widths |
| Rope adjustment | Pro Rope Adjusters at the headrest |
| Rope risers | Removable, painted, outside frame, 7 height positions with the extension legs |
| Adjustable feet | Yes |
| Maximum user weight | 150 kg, users 145cm to 193cm |
| Half Cadillac fittings | Push through bar, roll down bar, safety strap, foot straps, hand handles, 2 pairs double eyelet spring holders, 8 carabiners, 8 dog clips |
| Compatibility | Sold as a complete bundle. The Half Cadillac mounts to the C8-Pro via the model specific bracket set and the reformer must be raised on the 42cm leg extensions, both included here |
| Certification | Independently tested to EN ISO 20957-1:2013 |
Delivery
This bundle ships freight on a pallet and arrives partially assembled. Plan for two people to move it into position and assemble it in the room where it will live. Carrying a built machine through a doorway is not realistic. Align-Pilates publishes an assembly guide for the C8-Pro and a second one for the Half Cadillac, and we send both links with your order confirmation.
Common questions
Can I add the Half Cadillac to a C8-Pro I already own?
Yes. The half frame retrofits to an existing C8-Pro, but the bracket set is series specific and will not cross over from another Align-Pilates model. You also need the 42cm leg extensions, the mattress converter and the platform extender. Call 866-861-6317 and we will confirm the part list against your machine first.
What is the difference between the Half Cadillac and the Full Cadillac?
The Half Cadillac is one upright assembly at the end of the reformer. It gives you push through bar, roll down bar and spring work, and keeps the room open. The Full Cadillac is a four poster frame with an overhead canopy. It adds trapeze and hanging work but needs more floor space and height. If trapeze is part of your teaching, buy the Cadillac reformer combo instead.
What ceiling height do I actually need?
Assembled height is 205cm. Allow clearance above that for the roll down bar arc and for a standing client on the arm springs. Measure to the lowest obstruction in the room, not the highest point of the ceiling.
Do the leg extensions change how the reformer feels?
They raise the whole machine, so the carriage sits higher than a standard C8-Pro. Most instructors prefer that for getting clients on and off, and the extensions give the rope risers their full set of 7 height positions. They are not optional on this bundle.
Is it rated for commercial studio use?
Yes. The C8-Pro is independently tested to EN ISO 20957-1:2013, maximum user weight 150kg, with a stated user height range of 145cm to 193cm.
Everything you need to know about shipping, delivery, and returns for Align-Pilates equipment purchased through RecovAthlete. Have a question before ordering? Call 866-861-6317 or email support@recovathlete.com and we'll confirm exactly what's available for your location.
✅
Authorized Align-Pilates Dealer
RecovAthlete is an authorized dealer of Align-Pilates equipment. Every purchase is backed by the full manufacturer warranty directly from Align-Pilates and their exclusive North American distributor, Kloz Inc.
Shipping
Important
Once your order ships, the delivery address cannot be changed. If a shipment fails due to an incorrect address, return fees may apply. Inspect all equipment thoroughly upon delivery — any damage or concerns must be reported within 3 business days of receipt.
Returns Policy
Non-Returnable Items
Returns are not accepted on reformers, chairs, ladder barrels, full cadillacs, or half cadillacs — no exceptions. These items are only eligible for replacement if they arrive damaged or were shipped in error.
Accessories — 30-Day Returns
- Returns accepted within 30 days of purchase (shipping costs excluded)
- All goods must be returned in original condition
- Subject to a restocking charge
- Return shipping costs are the sole responsibility of the purchaser
Return Authorization Number (RNA) Required
All returns — for any reason — require a Return Authorization Number before sending anything back. Items returned without an RNA will not be accepted.
To obtain an RNA, contact Kloz Inc. (Align-Pilates' exclusive North American distributor) directly:
- Phone: 1-888-756-7798
- Email: info@klozinc.com
If Your Item Arrives Damaged or Defective
- Contact us within 3 business days of delivery at 866-861-6317 or support@recovathlete.com
- Provide photos and a description of the damage
- Once confirmed, we will coordinate a replacement or resolution with the distributor
Order Cancellations
- Cancel before shipment — no charge
- Cancel after shipment — 25% restocking fee plus return shipping charges apply
Warranty Overview
Align-Pilates equipment carries a multi-year manufacturer's warranty against defects in materials and workmanship. The warranty that applies depends on the product:
Maintenance Note
Reformers require regular basic maintenance and cleaning. Most issues that arise during ownership can be resolved through consistent, simple cleaning practices. Failure to follow Align-Pilates' maintenance guidelines may void the warranty. Contact us and we'll guide you through the correct maintenance routine for your machine.
Full warranty terms by product type: view the Align-Pilates Warranty page. Manufacturer warranty details also available at align-pilates.com/resources/warranty-maintenance.
The whole Half Cadillac repertoire in one bundle, with nothing left to order after
The Align Pilates C8-Pro Pilates Reformer with Half Cadillac arrives as a complete setup, not a machine plus a shopping list. In the box: the C8-Pro reformer on its oversize aluminium profile frame, the Half Cadillac frame, the bracket set cut for this series, the 42cm leg extensions the conversion requires, a mattress converter, a platform extender, a frame sitting box and a 60 inch gondola pole.
Align calls this attachment a Half Cadillac, and that is the name on the parts list, though buyers shopping for a reformer with a tower usually mean this exact piece. It mounts at the headrest end and carries the push through bar, roll down bar, safety strap, foot straps, hand handles, spring holders and long springs. If you want the machine without it, we sell the C8-Pro reformer on its own.
Check your ceiling before you order
Assembled height with the leg extensions and Half Cadillac fitted is 205cm, a little under 7 feet, and that is the frame alone. Add clearance above it for the roll down bar to swing through its arc and for a standing client on the arm springs. Measure to the lowest obstruction in the room, not to the highest point of the ceiling. Beams, light fittings and ductwork are what catch people out. Floor footprint is 244cm by 66cm.
Best for, and not ideal for
Best for
- Studios that want Cadillac repertoire in a room that still holds other equipment
- One to one and small group teaching built around push through bar and roll down bar work
- Buyers outfitting from scratch who would rather not chase brackets and converters as separate line items
- Home studios with a permanent room, a level floor and the height to match
Not ideal for
- Rooms with less than 205cm of clear height to the lowest obstruction, plus clearance above that
- Anyone who needs trapeze or overhead canopy work, that is Full Cadillac territory
- Studios that fold or stand machines away between classes, the C8-Pro does neither
- Clients outside the 145cm to 193cm height range Align specifies for this reformer
Why we carry this one
The question we get asked most here is Half Cadillac against Full Cadillac. The Half Cadillac is a single upright assembly at one end of the reformer. It gives you the push through bar, the roll down bar, arm and leg spring work, and with the converter and extender fitted, a flat bed for supine Cadillac work. The room stays open and one instructor can work all the way around the machine. The Full Cadillac is a four poster frame with an overhead canopy. It adds trapeze and hanging work a half frame cannot do, and asks for a good deal more floor area and height in return. If trapeze is on your programme, go to the C8-Pro Cadillac reformer combo and budget the space for it.
For everyone else the half frame is the honest answer, because most studio Cadillac programming is push through bar, roll down bar and spring work. The C8-Pro underneath is a commercial reformer, independently tested to EN ISO 20957-1:2013, and the Half Cadillac upper frame is stainless steel rather than chromed steel.
What the specs mean for you
| Specification | What it means in practice |
|---|---|
| 42cm leg extensions included | A requirement, not an upgrade. The Half Cadillac only works with the reformer raised, and the extensions give the rope risers their full range of positions |
| 205cm assembled height | Sets your minimum room. Measure to the lowest thing hanging from the ceiling and leave clearance above the frame for the roll down bar arc |
| 106.5cm carriage travel | Long enough that a 6 foot client reaches full leg extension without running out of track |
| 92cm x 58cm carriage | Standard studio width. Stable for kneeling and side lying, and narrow enough to hold the footprint at 66cm |
| 8 PU wheels on anodised aluminium runners | Quiet under load and close to maintenance free through a commercial duty cycle |
| Rapid Change spring bar | Spring load changes with one hand, springs still attached. A few seconds per transition is real teaching time across a class |
| 8 springs in two lengths | 47cm standard springs cover reformer work, 64cm long springs cover the Half Cadillac. No re-rigging to switch modes |
| 150kg maximum user weight | Rated for commercial use across a normal adult client range, with a stated height range of 145cm to 193cm |
What ships with it
- C8-Pro Pilates reformer
- Half Cadillac frame with a stainless steel upper frame, and the bracket set for this reformer series
- 42cm leg extensions, required to raise the reformer
- Mattress converter and platform extender for flat bed conversion
- Frame sitting box
- 60 inch maple gondola pole
- Push through bar, roll down bar, safety strap, one pair of foot straps, one pair of hand handles
- Two pairs of double eyelet spring holders, 8 carabiners, 8 double ended dog clips
- 8 nickel plated music wire springs: 2 standard very light, 2 standard medium, 2 long light, 2 long strong
Sold separately
- Replacement and additional springs in both the 47cm standard and 64cm long lengths
- Bracket sets and leg extensions for other Align-Pilates reformers, if you are fitting a half frame to a machine you own
Call 866-861-6317 between 9am and 6pm EST, Monday to Friday, if you want a component checked against your existing setup before ordering. White glove delivery and in room assembly are available as a paid add on.
Full specifications
| Specification | Detail |
|---|---|
| Product code | PAPC8HALFCAD |
| Frame | Oversize aluminium profile. Half Cadillac has a full stainless steel upper frame |
| Dimensions | 244cm L x 66cm W x 26cm H (reformer alone, standard legs) |
| Dimensions with Half Cadillac | 244cm L x 66cm W x 205cm H (extensions and Half Cadillac fitted) |
| Carriage size | 92cm L x 58cm W |
| Carriage travel | 106.5 cm |
| Reformer weight | 66 kg |
| Wheels | 8 PU wheels on precision anodised aluminium runners |
| Spring bar | Patent pending Rapid Change (RC), one hand, springs attached |
| Springs included | 8 nickel plated music wire: 2x 47cm very light, 2x 47cm medium, 2x 64cm light, 2x 64cm strong |
| Footbar | Oversize aluminium, 4 lockable positions including flat |
| Head rest | 3 positions |
| Shoulder rests | Removable and lockable, off centred for two widths |
| Rope adjustment | Pro Rope Adjusters at the headrest |
| Rope risers | Removable, painted, outside frame, 7 height positions with the extension legs |
| Adjustable feet | Yes |
| Maximum user weight | 150 kg, users 145cm to 193cm |
| Half Cadillac fittings | Push through bar, roll down bar, safety strap, foot straps, hand handles, 2 pairs double eyelet spring holders, 8 carabiners, 8 dog clips |
| Compatibility | Sold as a complete bundle. The Half Cadillac mounts to the C8-Pro via the model specific bracket set and the reformer must be raised on the 42cm leg extensions, both included here |
| Certification | Independently tested to EN ISO 20957-1:2013 |
Delivery
This bundle ships freight on a pallet and arrives partially assembled. Plan for two people to move it into position and assemble it in the room where it will live. Carrying a built machine through a doorway is not realistic. Align-Pilates publishes an assembly guide for the C8-Pro and a second one for the Half Cadillac, and we send both links with your order confirmation.
Common questions
Can I add the Half Cadillac to a C8-Pro I already own?
Yes. The half frame retrofits to an existing C8-Pro, but the bracket set is series specific and will not cross over from another Align-Pilates model. You also need the 42cm leg extensions, the mattress converter and the platform extender. Call 866-861-6317 and we will confirm the part list against your machine first.
What is the difference between the Half Cadillac and the Full Cadillac?
The Half Cadillac is one upright assembly at the end of the reformer. It gives you push through bar, roll down bar and spring work, and keeps the room open. The Full Cadillac is a four poster frame with an overhead canopy. It adds trapeze and hanging work but needs more floor space and height. If trapeze is part of your teaching, buy the Cadillac reformer combo instead.
What ceiling height do I actually need?
Assembled height is 205cm. Allow clearance above that for the roll down bar arc and for a standing client on the arm springs. Measure to the lowest obstruction in the room, not the highest point of the ceiling.
Do the leg extensions change how the reformer feels?
They raise the whole machine, so the carriage sits higher than a standard C8-Pro. Most instructors prefer that for getting clients on and off, and the extensions give the rope risers their full set of 7 height positions. They are not optional on this bundle.
Is it rated for commercial studio use?
Yes. The C8-Pro is independently tested to EN ISO 20957-1:2013, maximum user weight 150kg, with a stated user height range of 145cm to 193cm.
Align-Pilates equipment is backed by manufacturer warranties issued directly by Align-Pilates Equipment Ltd. The warranty that applies to your purchase depends on the product type. All warranties are for the original purchaser only and are non-transferable.
✅
Authorized Align-Pilates Dealer
RecovAthlete is an authorized dealer of Align-Pilates equipment. All purchases qualify for full manufacturer warranty protection through Align-Pilates and their exclusive North American distributor, Kloz Inc.
Commercial Warranty — A, C & M Series Reformers
Applies to: A8-Pro, C8-Pro, C8-S Pro, C8-PRO Noir, M8-Pro, Full & Half Cadillac systems
Covers domestic and commercial usage up to 37.5 hours per week. User weight limit: 150 kg / 330 lbs. Align-Pilates will repair or replace any mechanical component that malfunctions due to defects in materials or workmanship during the warranty period.
Note: wooden frames must not be positioned next to convection radiators or air conditioning units. Springs showing signs of damage or wear must be replaced immediately regardless of age.
Light Commercial Warranty — R8-Pro & F3 Reformers
Applies to: R8-Pro (Black & White), F3 Folding Reformer
Covers domestic use and limited commercial usage up to 20 hours per week. User weight limit: 120 kg / 265 lbs. Align-Pilates will repair or replace any mechanical component that malfunctions due to defects in materials or workmanship during the warranty period.
Note: commercial use beyond 20 hours per week voids the warranty on these models.
Commercial Warranty — Combo Chairs & Ladder Barrels
Applies to: Combo Chair III, Ladder Barrel RC
Covers domestic and commercial usage up to 37.5 hours per week. User weight limit: 150 kg / 330 lbs.
Moving mechanisms include the Rapid Change Ladder Barrel and Combo Chair locking handles. Springs showing damage or wear must be replaced immediately regardless of age.
What Is Not Covered
- Normal wear and tear
- Damage from negligence, misuse, abuse, or improper maintenance
- Unauthorized modifications or repairs
- Superficial scratches to the finish
- Upholstery tears, cuts, burns, stains, or damage from improper use (jewelry, inappropriate clothing)
- Rust from improper storage — store in a clean, dry environment; in coastal areas, wipe down regularly and minimize exposure to sea air
- Shipping costs, customs fees, or installation costs for warranty parts
- Equipment used outside of recognized Pilates repertoire
Warranty Claim Procedure
- Contact us at 866-861-6317 or support@recovathlete.com to initiate a claim
- We will contact Align-Pilates or their authorized North American distributor on your behalf
- A return authorization number (RNA) will be issued if a return is required — items returned without an RNA will not be accepted
- You are responsible for the cost of shipping the item back for inspection
- Parts repaired or replaced under warranty are covered for the remainder of the original warranty period only
Full manufacturer warranty terms: align-pilates.com/resources/warranty-maintenance
Let customers speak for us
Have Questions? Talk to Our Equipment Team.
We respond within 2 hours.
US & Canada shipping. Financing available.
- Choosing a selection results in a full page refresh.
