866-861-6317
Ask an Expert
Luxury Spas Cold Plunge Pro
Ships within 10 business days | FREE SHIPPING
- Regular price
- $4,490.00
- Regular price
-
$6,735.00 - Sale price
- $4,490.00
- Unit price
- per
Save $2,245.00
Save $2,245.00 USD
SHIPPING FREE
10
Description
Luxury Spas Cold Plunge Pro: acrylic cold plunge with 1 HP cooling and heating from 37°F to 104°F
The Cold Plunge Pro is the standard-size model in the Luxury Spas lineup. Its interior measures 63 inches long by 30 inches wide by 17 inches deep, with a manufacturer-rated user height of up to 6 feet 5 inches. The exterior footprint is 67 inches long by 30 inches wide by 23 inches high, making it a practical option for garages, home gyms, basements, and spare rooms without permanent plumbing or major construction.
The tub pairs with a self-contained GD-10-HC chiller positioned alongside it and connected by two hoses. The chiller handles cooling, heating, filtration, and ozone disinfection from one cabinet. You can control settings from the TFT touch panel or through the Tuya Smart app on your phone.
This plug and play cold plunge tub works well for home gyms, garages, basements, and covered patios. Fill it with a hose, connect it to a dedicated 15 amp 120V circuit, choose your temperature, and it is ready for regular use. Cold immersion sessions are commonly kept short, often around 2 to 5 minutes depending on experience and personal routine.
Compared with a basic stock tank and separate chiller, the Cold Plunge Pro combines temperature control with built-in filtration and ozone water care. It also offers a more permanent setup than an inflatable plunge. A few limits are worth knowing before you order: 37°F is the minimum setting, the chiller requires its own circuit, and the manufacturer warranty applies to residential use only. Taller users, or anyone looking for a deeper basin, may prefer the Cold Plunge Pro XL.
Authorized Luxury Spas dealer. RecovAthlete is an authorized dealer of Luxury Spas USA. Every unit ships factory direct with the full manufacturer warranty honored. For fit or install questions, call 866-861-6317, 9am to 6pm EST, Monday to Friday.
Important: read before you order
Power. Total draw is 750W, and the manufacturer requires a dedicated 15 amp 120V circuit. The system itself is plug and play, but the outlet should not share a circuit with equipment such as a freezer, compressor, or other high-draw appliances. If needed, have an electrician install a dedicated line before delivery. A leakage protection device is built into the power cord and should be tested monthly.
Placement. The tub needs a level surface rated to support 1,215 lbs. If you plan to install it on a deck, have a contractor or structural engineer confirm the load capacity beforehand. The chiller should sit at the same level as the tub, at least 60 inches from other electrical appliances, with enough space around the vents for airflow. Hose access is also needed for filling.
Residential use. The Luxury Spas warranty applies to residential installations only. Commercial applications are excluded. If you are buying for a gym, studio, clinic, or other commercial facility, call us before ordering and we can recommend an option with commercial warranty terms.
Best for
Users up to 6 feet 5 inches. Athletes using cold immersion regularly. Home gym, garage, and basement installations with a dedicated 15 amp circuit. Buyers who want both cold and warm water from one tub. Anyone looking for built-in filtration and ozone water care instead of a basic tub-and-chiller setup.
Not ideal for
Commercial facilities, since commercial use is excluded from the manufacturer warranty. Users over 6 feet 5 inches or anyone who wants a deeper basin, who may prefer the Cold Plunge Pro XL with its 23-inch interior depth. It is also not suited to locations without a dedicated 15 amp circuit, buyers who want temperatures below 37°F without adding ice, or fully exposed outdoor locations where the chiller would sit in direct sun, rain, or snow.
Why RecovAthlete carries this
Many cold plunges are either simple tubs paired with an external chiller or larger commercial systems designed for facilities. The Cold Plunge Pro sits between those options. You get a molded acrylic tub paired with a chiller that handles cooling, heating, filtration, and ozone disinfection.
Water care is another reason we like this setup. The adjustable ozone cycle and replaceable cartridge filter reduce how much routine maintenance depends on manually draining and cleaning the tub. That makes it easier to keep the plunge ready for regular use.
Cold Plunge Pro vs Cold Plunge Pro XL
Both models use the same chiller and control system. Your choice mainly comes down to available space, your height, and whether you want a deeper basin.
| Spec | Cold Plunge Pro | Cold Plunge Pro XL |
|---|---|---|
| User height rating | Up to 6 ft 5 in | Up to 6 ft 9 in |
| Interior length | 63 in | 70 in |
| Interior depth | 17 in | 23 in |
| Exterior footprint | 67 in L by 30 in W by 23 in H | 75 in L by 32 in W by 28 in H |
| Chiller | GD-10-HC, 1 HP, cooling and heating | GD-10-HC, 1 HP, cooling and heating |
| Temperature range | 37°F to 104°F | 37°F to 104°F |
| Power | 750W, dedicated 15A 120V circuit | 750W, dedicated 15A 120V circuit |
| Water care | Ozone cycle, strainer, cartridge filter | Ozone cycle, strainer, cartridge filter |
| Control | TFT panel plus Tuya Smart app | TFT panel plus Tuya Smart app |
| Warranty | Residential only | Residential only |
Cooling performance is the same on both models. Choose the standard Pro if its 63-inch interior and smaller footprint suit your space. Move up to the XL if you need additional length or a deeper basin.
See it in operation
Who buys the Cold Plunge Pro
- Athletes using cold immersion daily or several times per week
- CrossFit, BJJ, MMA, and endurance athletes incorporating cold exposure into recovery routines
- Home gym owners who want cold and warm water in one setup
- Sauna users adding cold immersion or contrast sessions at home
- Buyers moving up from a stock tank or inflatable plunge to a permanent acrylic tub
What the Cold Plunge Pro does
- Cools water down to 37°F and heats it up to 104°F, with adjustment throughout the range
- Cools 100 liters of water from 73°F to 42°F in approximately 1.5 hours at 59°F ambient temperature
- Accommodates users up to 6 feet 5 inches in a 63-inch interior
- Runs an adjustable ozone disinfection cycle of up to 5 minutes
- Filters water through a built-in strainer and replaceable cartridge filter
- Connects to the Tuya Smart app over WiFi on iOS and Android
- Uses a TFT touch panel on the chiller to display temperature, water flow, and fault warnings
- Circulates water through a pump designed for quiet, low-consumption operation
How the specs affect everyday use
| Spec | What it means for you |
|---|---|
| 1 HP cooling and heating chiller | The same chiller handles both cooling and heating, giving you control over water temperature without needing separate equipment. |
| 37°F to 104°F, adjustable | Use the tub for cold immersion, warmer water sessions, or as part of a contrast routine. |
| 73°F to 42°F in about 1.5 hours (100L, 59°F ambient) | You can cool the water ahead of a session instead of relying on ice. Actual cooling time varies with water volume and surrounding temperature, so a hot garage will usually take longer than a climate-controlled basement. |
| Interior 63 in L by 30 in W by 17 in H | The manufacturer rates the tub for users up to 6 feet 5 inches. The 17-inch depth gives you a seated plunge rather than the deeper immersion of the XL model. |
| Exterior 67 in L by 30 in W by 23 in H | Measure the installation area and leave enough room beside the tub for the chiller and proper ventilation. |
| Supports 1,215 lbs when filled | A solid ground-floor, garage, or basement surface is generally the easiest setup. Deck installations should be checked by a contractor or structural engineer first. |
| Ozone generator with adjustable cycle | The built-in ozone function helps with routine water care between water changes. |
| Tuya Smart app on WiFi | Adjust temperature from your phone before a session. The app works with 2.4GHz WiFi networks. |
| 750W on a dedicated 15A 120V circuit | The unit uses standard household voltage but requires its own electrical circuit. Confirm this before delivery. |
| Acrylic shell | The rigid molded surface is easy to wipe down and carries a 2-year residential warranty against structural failure and surface defects. |
What ships with it
- Cold Plunge Pro acrylic tub with leveling feet, drain connector, and LED light
- GD-10-HC chiller with cooling, heating, ozone, and filtration
- Two connection hoses for inlet and outlet
- Cartridge filter
- Owner's manual and warranty certificate
Full specifications
| Tub material | Acrylic |
| Exterior dimensions | 67 in L by 30 in W by 23 in H |
| Interior dimensions | 63 in L by 30 in W by 17 in H |
| User capacity | Individuals up to 6 feet 5 inches |
| Required surface rating | 1,215 lbs |
| Chiller model | GD-10-HC, cooling and heating |
| Chiller capacity | 1 HP |
| Temperature range | 37°F to 104°F, adjustable |
| Cooling rate | 100 liters from 73°F to 42°F in approximately 1.5 hours at 59°F ambient |
| Refrigerant | R410A |
| Total wattage | 750W |
| Power requirement | Dedicated 15 amp 120V circuit, plug and play, leakage protection built into the cord |
| Voltage | 110V 60Hz |
| Disinfection | Ozone generator, adjustable cycle up to 5 minutes |
| Filtration | Built-in strainer plus replaceable cartridge filter |
| Controls | TFT touch panel on the chiller, plus Tuya Smart app on iOS and Android over 2.4GHz WiFi |
| Chiller weight | Approximately 110 lbs, with a carry handle |
| Chiller operating ambient | 37°F to 104°F |
| Warranty | Residential use. 2 years acrylic shell, 1 year electrical, 1 year components. Commercial applications excluded. |
Documents
Setup and first use
- Level the tub using its adjustable feet before filling
- Leave the chiller standing upright for 24 hours after delivery before switching it on so the refrigerant can settle
- Connect the inlet and outlet hoses hand-tight and use Teflon tape on the drain connector
- Fill the tub to approximately 5 inches below the rim indoors or 3 inches below the rim outdoors
- Keep the water level above the chiller inlet so circulation can operate correctly
- Never switch on the chiller before the tub has been filled
Shipping and delivery
The Cold Plunge Pro ships by freight with standard curbside delivery. The carrier will contact you before arrival to arrange a delivery appointment. White glove delivery and installation are also available as paid add-ons, with pricing based on your ZIP code.
Measure doorways, hallways, turns, and the final installation area before delivery. When the shipment arrives, inspect the crate before signing and note any visible damage on the bill of lading, since freight damage is excluded from the manufacturer warranty.
Financing is available at checkout. For a delivery quote or help confirming whether the Cold Plunge Pro will fit your space, call 866-861-6317, 9am to 6pm EST, Monday to Friday.
Frequently asked questions
How cold does it actually get?
The minimum setting is 37°F. Cooling time depends on the amount of water in the tub and the surrounding temperature. The manufacturer rates the chiller to cool 100 liters from 73°F to 42°F in approximately 1.5 hours at an ambient temperature of 59°F. Cooling will generally take longer in a hot garage or warm outdoor environment.
How tall a person does it fit?
The manufacturer rates the Cold Plunge Pro for users up to 6 feet 5 inches. Interior dimensions are 63 inches long by 30 inches wide by 17 inches deep. Buyers who want more room or deeper immersion can move up to the Cold Plunge Pro XL, which has a 70-inch interior length and 23-inch depth.
Does it heat as well as chill?
Yes. The chiller both cools and heats, with an adjustable range from 37°F to 104°F. This allows you to use the same tub for cold immersion or warm water sessions.
Do I need an electrician?
The unit is plug and play on 110V, so electrical work is generally unnecessary if you already have the correct outlet. The manufacturer does require a dedicated 15 amp circuit, with total draw rated at 750W. If your intended outlet shares a circuit with other equipment, have an electrician install a dedicated line before delivery. A leakage protection device is built into the power cord and should be tested monthly.
What does the floor need to hold?
Plan for a level surface rated to support 1,215 lbs. Ground-floor, garage, and basement installations are common. For a deck, have a contractor or structural engineer confirm the load capacity before delivery. If you plan to install the tub on pavers, the manual specifies pavers at least 2 inches thick and 12 inches square and notes that occasional re-leveling may be required.
Can I control it from my phone?
Yes. The chiller connects to the Tuya Smart app on iOS and Android through WiFi. You can use the app to adjust temperature and check system information before a session. The app works with 2.4GHz WiFi networks.
How do I keep the water clean?
The chiller includes an ozone disinfection cycle that can run automatically at an interval you select, for up to 5 minutes. The internal strainer should be cleaned approximately every 4 weeks, while the cartridge filter is typically replaced around every two months. A low-water-flow warning on the display can also indicate that the filter needs attention.
Can I install it outside?
The tub can be installed outdoors, but the chiller needs protection from direct sun, rain, and snow. Before outdoor temperatures reach 32°F, drain the chiller completely through the rear drain to help prevent freeze damage. For outdoor installations, the manufacturer recommends filling the tub to about 3 inches below the rim.
Can I put this in my gym or studio?
Not under the standard manufacturer warranty. Luxury Spas excludes commercial applications from coverage on this model. If you are buying for a gym, studio, clinic, or other commercial facility, call 866-861-6317 and we can recommend a cold plunge with commercial warranty terms.
120% Price Match
Financing
Shipping
Warranty
Luxury Spas Cold Plunge Pro: acrylic cold plunge with 1 HP cooling and heating from 37°F to 104°F
The Cold Plunge Pro is the standard-size model in the Luxury Spas lineup. Its interior measures 63 inches long by 30 inches wide by 17 inches deep, with a manufacturer-rated user height of up to 6 feet 5 inches. The exterior footprint is 67 inches long by 30 inches wide by 23 inches high, making it a practical option for garages, home gyms, basements, and spare rooms without permanent plumbing or major construction.
The tub pairs with a self-contained GD-10-HC chiller positioned alongside it and connected by two hoses. The chiller handles cooling, heating, filtration, and ozone disinfection from one cabinet. You can control settings from the TFT touch panel or through the Tuya Smart app on your phone.
This plug and play cold plunge tub works well for home gyms, garages, basements, and covered patios. Fill it with a hose, connect it to a dedicated 15 amp 120V circuit, choose your temperature, and it is ready for regular use. Cold immersion sessions are commonly kept short, often around 2 to 5 minutes depending on experience and personal routine.
Compared with a basic stock tank and separate chiller, the Cold Plunge Pro combines temperature control with built-in filtration and ozone water care. It also offers a more permanent setup than an inflatable plunge. A few limits are worth knowing before you order: 37°F is the minimum setting, the chiller requires its own circuit, and the manufacturer warranty applies to residential use only. Taller users, or anyone looking for a deeper basin, may prefer the Cold Plunge Pro XL.
Authorized Luxury Spas dealer. RecovAthlete is an authorized dealer of Luxury Spas USA. Every unit ships factory direct with the full manufacturer warranty honored. For fit or install questions, call 866-861-6317, 9am to 6pm EST, Monday to Friday.
Important: read before you order
Power. Total draw is 750W, and the manufacturer requires a dedicated 15 amp 120V circuit. The system itself is plug and play, but the outlet should not share a circuit with equipment such as a freezer, compressor, or other high-draw appliances. If needed, have an electrician install a dedicated line before delivery. A leakage protection device is built into the power cord and should be tested monthly.
Placement. The tub needs a level surface rated to support 1,215 lbs. If you plan to install it on a deck, have a contractor or structural engineer confirm the load capacity beforehand. The chiller should sit at the same level as the tub, at least 60 inches from other electrical appliances, with enough space around the vents for airflow. Hose access is also needed for filling.
Residential use. The Luxury Spas warranty applies to residential installations only. Commercial applications are excluded. If you are buying for a gym, studio, clinic, or other commercial facility, call us before ordering and we can recommend an option with commercial warranty terms.
Best for
Users up to 6 feet 5 inches. Athletes using cold immersion regularly. Home gym, garage, and basement installations with a dedicated 15 amp circuit. Buyers who want both cold and warm water from one tub. Anyone looking for built-in filtration and ozone water care instead of a basic tub-and-chiller setup.
Not ideal for
Commercial facilities, since commercial use is excluded from the manufacturer warranty. Users over 6 feet 5 inches or anyone who wants a deeper basin, who may prefer the Cold Plunge Pro XL with its 23-inch interior depth. It is also not suited to locations without a dedicated 15 amp circuit, buyers who want temperatures below 37°F without adding ice, or fully exposed outdoor locations where the chiller would sit in direct sun, rain, or snow.
Why RecovAthlete carries this
Many cold plunges are either simple tubs paired with an external chiller or larger commercial systems designed for facilities. The Cold Plunge Pro sits between those options. You get a molded acrylic tub paired with a chiller that handles cooling, heating, filtration, and ozone disinfection.
Water care is another reason we like this setup. The adjustable ozone cycle and replaceable cartridge filter reduce how much routine maintenance depends on manually draining and cleaning the tub. That makes it easier to keep the plunge ready for regular use.
Cold Plunge Pro vs Cold Plunge Pro XL
Both models use the same chiller and control system. Your choice mainly comes down to available space, your height, and whether you want a deeper basin.
| Spec | Cold Plunge Pro | Cold Plunge Pro XL |
|---|---|---|
| User height rating | Up to 6 ft 5 in | Up to 6 ft 9 in |
| Interior length | 63 in | 70 in |
| Interior depth | 17 in | 23 in |
| Exterior footprint | 67 in L by 30 in W by 23 in H | 75 in L by 32 in W by 28 in H |
| Chiller | GD-10-HC, 1 HP, cooling and heating | GD-10-HC, 1 HP, cooling and heating |
| Temperature range | 37°F to 104°F | 37°F to 104°F |
| Power | 750W, dedicated 15A 120V circuit | 750W, dedicated 15A 120V circuit |
| Water care | Ozone cycle, strainer, cartridge filter | Ozone cycle, strainer, cartridge filter |
| Control | TFT panel plus Tuya Smart app | TFT panel plus Tuya Smart app |
| Warranty | Residential only | Residential only |
Cooling performance is the same on both models. Choose the standard Pro if its 63-inch interior and smaller footprint suit your space. Move up to the XL if you need additional length or a deeper basin.
See it in operation
Who buys the Cold Plunge Pro
- Athletes using cold immersion daily or several times per week
- CrossFit, BJJ, MMA, and endurance athletes incorporating cold exposure into recovery routines
- Home gym owners who want cold and warm water in one setup
- Sauna users adding cold immersion or contrast sessions at home
- Buyers moving up from a stock tank or inflatable plunge to a permanent acrylic tub
What the Cold Plunge Pro does
- Cools water down to 37°F and heats it up to 104°F, with adjustment throughout the range
- Cools 100 liters of water from 73°F to 42°F in approximately 1.5 hours at 59°F ambient temperature
- Accommodates users up to 6 feet 5 inches in a 63-inch interior
- Runs an adjustable ozone disinfection cycle of up to 5 minutes
- Filters water through a built-in strainer and replaceable cartridge filter
- Connects to the Tuya Smart app over WiFi on iOS and Android
- Uses a TFT touch panel on the chiller to display temperature, water flow, and fault warnings
- Circulates water through a pump designed for quiet, low-consumption operation
How the specs affect everyday use
| Spec | What it means for you |
|---|---|
| 1 HP cooling and heating chiller | The same chiller handles both cooling and heating, giving you control over water temperature without needing separate equipment. |
| 37°F to 104°F, adjustable | Use the tub for cold immersion, warmer water sessions, or as part of a contrast routine. |
| 73°F to 42°F in about 1.5 hours (100L, 59°F ambient) | You can cool the water ahead of a session instead of relying on ice. Actual cooling time varies with water volume and surrounding temperature, so a hot garage will usually take longer than a climate-controlled basement. |
| Interior 63 in L by 30 in W by 17 in H | The manufacturer rates the tub for users up to 6 feet 5 inches. The 17-inch depth gives you a seated plunge rather than the deeper immersion of the XL model. |
| Exterior 67 in L by 30 in W by 23 in H | Measure the installation area and leave enough room beside the tub for the chiller and proper ventilation. |
| Supports 1,215 lbs when filled | A solid ground-floor, garage, or basement surface is generally the easiest setup. Deck installations should be checked by a contractor or structural engineer first. |
| Ozone generator with adjustable cycle | The built-in ozone function helps with routine water care between water changes. |
| Tuya Smart app on WiFi | Adjust temperature from your phone before a session. The app works with 2.4GHz WiFi networks. |
| 750W on a dedicated 15A 120V circuit | The unit uses standard household voltage but requires its own electrical circuit. Confirm this before delivery. |
| Acrylic shell | The rigid molded surface is easy to wipe down and carries a 2-year residential warranty against structural failure and surface defects. |
What ships with it
- Cold Plunge Pro acrylic tub with leveling feet, drain connector, and LED light
- GD-10-HC chiller with cooling, heating, ozone, and filtration
- Two connection hoses for inlet and outlet
- Cartridge filter
- Owner's manual and warranty certificate
Full specifications
| Tub material | Acrylic |
| Exterior dimensions | 67 in L by 30 in W by 23 in H |
| Interior dimensions | 63 in L by 30 in W by 17 in H |
| User capacity | Individuals up to 6 feet 5 inches |
| Required surface rating | 1,215 lbs |
| Chiller model | GD-10-HC, cooling and heating |
| Chiller capacity | 1 HP |
| Temperature range | 37°F to 104°F, adjustable |
| Cooling rate | 100 liters from 73°F to 42°F in approximately 1.5 hours at 59°F ambient |
| Refrigerant | R410A |
| Total wattage | 750W |
| Power requirement | Dedicated 15 amp 120V circuit, plug and play, leakage protection built into the cord |
| Voltage | 110V 60Hz |
| Disinfection | Ozone generator, adjustable cycle up to 5 minutes |
| Filtration | Built-in strainer plus replaceable cartridge filter |
| Controls | TFT touch panel on the chiller, plus Tuya Smart app on iOS and Android over 2.4GHz WiFi |
| Chiller weight | Approximately 110 lbs, with a carry handle |
| Chiller operating ambient | 37°F to 104°F |
| Warranty | Residential use. 2 years acrylic shell, 1 year electrical, 1 year components. Commercial applications excluded. |
Documents
Setup and first use
- Level the tub using its adjustable feet before filling
- Leave the chiller standing upright for 24 hours after delivery before switching it on so the refrigerant can settle
- Connect the inlet and outlet hoses hand-tight and use Teflon tape on the drain connector
- Fill the tub to approximately 5 inches below the rim indoors or 3 inches below the rim outdoors
- Keep the water level above the chiller inlet so circulation can operate correctly
- Never switch on the chiller before the tub has been filled
Shipping and delivery
The Cold Plunge Pro ships by freight with standard curbside delivery. The carrier will contact you before arrival to arrange a delivery appointment. White glove delivery and installation are also available as paid add-ons, with pricing based on your ZIP code.
Measure doorways, hallways, turns, and the final installation area before delivery. When the shipment arrives, inspect the crate before signing and note any visible damage on the bill of lading, since freight damage is excluded from the manufacturer warranty.
Financing is available at checkout. For a delivery quote or help confirming whether the Cold Plunge Pro will fit your space, call 866-861-6317, 9am to 6pm EST, Monday to Friday.
Frequently asked questions
How cold does it actually get?
The minimum setting is 37°F. Cooling time depends on the amount of water in the tub and the surrounding temperature. The manufacturer rates the chiller to cool 100 liters from 73°F to 42°F in approximately 1.5 hours at an ambient temperature of 59°F. Cooling will generally take longer in a hot garage or warm outdoor environment.
How tall a person does it fit?
The manufacturer rates the Cold Plunge Pro for users up to 6 feet 5 inches. Interior dimensions are 63 inches long by 30 inches wide by 17 inches deep. Buyers who want more room or deeper immersion can move up to the Cold Plunge Pro XL, which has a 70-inch interior length and 23-inch depth.
Does it heat as well as chill?
Yes. The chiller both cools and heats, with an adjustable range from 37°F to 104°F. This allows you to use the same tub for cold immersion or warm water sessions.
Do I need an electrician?
The unit is plug and play on 110V, so electrical work is generally unnecessary if you already have the correct outlet. The manufacturer does require a dedicated 15 amp circuit, with total draw rated at 750W. If your intended outlet shares a circuit with other equipment, have an electrician install a dedicated line before delivery. A leakage protection device is built into the power cord and should be tested monthly.
What does the floor need to hold?
Plan for a level surface rated to support 1,215 lbs. Ground-floor, garage, and basement installations are common. For a deck, have a contractor or structural engineer confirm the load capacity before delivery. If you plan to install the tub on pavers, the manual specifies pavers at least 2 inches thick and 12 inches square and notes that occasional re-leveling may be required.
Can I control it from my phone?
Yes. The chiller connects to the Tuya Smart app on iOS and Android through WiFi. You can use the app to adjust temperature and check system information before a session. The app works with 2.4GHz WiFi networks.
How do I keep the water clean?
The chiller includes an ozone disinfection cycle that can run automatically at an interval you select, for up to 5 minutes. The internal strainer should be cleaned approximately every 4 weeks, while the cartridge filter is typically replaced around every two months. A low-water-flow warning on the display can also indicate that the filter needs attention.
Can I install it outside?
The tub can be installed outdoors, but the chiller needs protection from direct sun, rain, and snow. Before outdoor temperatures reach 32°F, drain the chiller completely through the rear drain to help prevent freeze damage. For outdoor installations, the manufacturer recommends filling the tub to about 3 inches below the rim.
Can I put this in my gym or studio?
Not under the standard manufacturer warranty. Luxury Spas excludes commercial applications from coverage on this model. If you are buying for a gym, studio, clinic, or other commercial facility, call 866-861-6317 and we can recommend a cold plunge with commercial warranty terms.
RecovAthlete's 120% Price Match Guarantee: Shop With Unmatched Confidence
At RecovAthlete, we're here to support your recovery and performance goals, without overpaying. Our 120% Price Match Guarantee makes sure you always get the best deal. If you find a lower price, not only will we match it, we'll beat it by adding 20% of the price difference back to your refund.
How It Works
- 60-Day Window: If you find the same item at a lower price from an authorized competitor within 60 days of your purchase, we'll match it.
- We Add 20%: Besides matching the price, we give you 20% of the difference back.
- Same Currency: Price comparisons must be in the same currency as your original purchase.
- MAP Policy Required: The competitor must be an authorized dealer of the product and follow a Minimum Advertised Price (MAP) policy set by the manufacturer.
Terms and Conditions
- Eligible Products: Must be the same model, SKU, and from an authorized seller.
- Verifiable Prices: We compare total verifiable selling prices (excluding taxes), including shipping.
- Manual Review: Our team reviews all claims for validity and eligibility.
Exclusions
- Used, refurbished, or secondary-market products
- Wholesale, contract, or below-cost pricing
- Marketplace sellers (Amazon, Walmart, Costco, etc.)
- Flash sales, closeouts, clearance, or limited-time promos
- Price matches can't be combined with other RecovAthlete discounts or offers
Our Ethical Pricing Pledge
We don't undercut manufacturers or sell below cost. We follow ethical pricing standards prioritizing fairness, brand integrity, and long-term trust.
How to Submit a Claim
- Get Proof: A screenshot, ad, or live link showing the competitor's lower price.
- Send Details: Include your order number, the product name, and the competitor info.
- Submit via Contact Page: contact the RecovAthlete team.
- Processing: Allow up to 6 weeks for verification and refund processing.
With our 120% Price Match Guarantee, you can shop knowing you'll never miss out on a better deal, because we'll beat it.
Luxury Spas Cold Plunge Pro: acrylic cold plunge with 1 HP cooling and heating from 37°F to 104°F
The Cold Plunge Pro is the standard-size model in the Luxury Spas lineup. Its interior measures 63 inches long by 30 inches wide by 17 inches deep, with a manufacturer-rated user height of up to 6 feet 5 inches. The exterior footprint is 67 inches long by 30 inches wide by 23 inches high, making it a practical option for garages, home gyms, basements, and spare rooms without permanent plumbing or major construction.
The tub pairs with a self-contained GD-10-HC chiller positioned alongside it and connected by two hoses. The chiller handles cooling, heating, filtration, and ozone disinfection from one cabinet. You can control settings from the TFT touch panel or through the Tuya Smart app on your phone.
This plug and play cold plunge tub works well for home gyms, garages, basements, and covered patios. Fill it with a hose, connect it to a dedicated 15 amp 120V circuit, choose your temperature, and it is ready for regular use. Cold immersion sessions are commonly kept short, often around 2 to 5 minutes depending on experience and personal routine.
Compared with a basic stock tank and separate chiller, the Cold Plunge Pro combines temperature control with built-in filtration and ozone water care. It also offers a more permanent setup than an inflatable plunge. A few limits are worth knowing before you order: 37°F is the minimum setting, the chiller requires its own circuit, and the manufacturer warranty applies to residential use only. Taller users, or anyone looking for a deeper basin, may prefer the Cold Plunge Pro XL.
Authorized Luxury Spas dealer. RecovAthlete is an authorized dealer of Luxury Spas USA. Every unit ships factory direct with the full manufacturer warranty honored. For fit or install questions, call 866-861-6317, 9am to 6pm EST, Monday to Friday.
Important: read before you order
Power. Total draw is 750W, and the manufacturer requires a dedicated 15 amp 120V circuit. The system itself is plug and play, but the outlet should not share a circuit with equipment such as a freezer, compressor, or other high-draw appliances. If needed, have an electrician install a dedicated line before delivery. A leakage protection device is built into the power cord and should be tested monthly.
Placement. The tub needs a level surface rated to support 1,215 lbs. If you plan to install it on a deck, have a contractor or structural engineer confirm the load capacity beforehand. The chiller should sit at the same level as the tub, at least 60 inches from other electrical appliances, with enough space around the vents for airflow. Hose access is also needed for filling.
Residential use. The Luxury Spas warranty applies to residential installations only. Commercial applications are excluded. If you are buying for a gym, studio, clinic, or other commercial facility, call us before ordering and we can recommend an option with commercial warranty terms.
Best for
Users up to 6 feet 5 inches. Athletes using cold immersion regularly. Home gym, garage, and basement installations with a dedicated 15 amp circuit. Buyers who want both cold and warm water from one tub. Anyone looking for built-in filtration and ozone water care instead of a basic tub-and-chiller setup.
Not ideal for
Commercial facilities, since commercial use is excluded from the manufacturer warranty. Users over 6 feet 5 inches or anyone who wants a deeper basin, who may prefer the Cold Plunge Pro XL with its 23-inch interior depth. It is also not suited to locations without a dedicated 15 amp circuit, buyers who want temperatures below 37°F without adding ice, or fully exposed outdoor locations where the chiller would sit in direct sun, rain, or snow.
Why RecovAthlete carries this
Many cold plunges are either simple tubs paired with an external chiller or larger commercial systems designed for facilities. The Cold Plunge Pro sits between those options. You get a molded acrylic tub paired with a chiller that handles cooling, heating, filtration, and ozone disinfection.
Water care is another reason we like this setup. The adjustable ozone cycle and replaceable cartridge filter reduce how much routine maintenance depends on manually draining and cleaning the tub. That makes it easier to keep the plunge ready for regular use.
Cold Plunge Pro vs Cold Plunge Pro XL
Both models use the same chiller and control system. Your choice mainly comes down to available space, your height, and whether you want a deeper basin.
| Spec | Cold Plunge Pro | Cold Plunge Pro XL |
|---|---|---|
| User height rating | Up to 6 ft 5 in | Up to 6 ft 9 in |
| Interior length | 63 in | 70 in |
| Interior depth | 17 in | 23 in |
| Exterior footprint | 67 in L by 30 in W by 23 in H | 75 in L by 32 in W by 28 in H |
| Chiller | GD-10-HC, 1 HP, cooling and heating | GD-10-HC, 1 HP, cooling and heating |
| Temperature range | 37°F to 104°F | 37°F to 104°F |
| Power | 750W, dedicated 15A 120V circuit | 750W, dedicated 15A 120V circuit |
| Water care | Ozone cycle, strainer, cartridge filter | Ozone cycle, strainer, cartridge filter |
| Control | TFT panel plus Tuya Smart app | TFT panel plus Tuya Smart app |
| Warranty | Residential only | Residential only |
Cooling performance is the same on both models. Choose the standard Pro if its 63-inch interior and smaller footprint suit your space. Move up to the XL if you need additional length or a deeper basin.
See it in operation
Who buys the Cold Plunge Pro
- Athletes using cold immersion daily or several times per week
- CrossFit, BJJ, MMA, and endurance athletes incorporating cold exposure into recovery routines
- Home gym owners who want cold and warm water in one setup
- Sauna users adding cold immersion or contrast sessions at home
- Buyers moving up from a stock tank or inflatable plunge to a permanent acrylic tub
What the Cold Plunge Pro does
- Cools water down to 37°F and heats it up to 104°F, with adjustment throughout the range
- Cools 100 liters of water from 73°F to 42°F in approximately 1.5 hours at 59°F ambient temperature
- Accommodates users up to 6 feet 5 inches in a 63-inch interior
- Runs an adjustable ozone disinfection cycle of up to 5 minutes
- Filters water through a built-in strainer and replaceable cartridge filter
- Connects to the Tuya Smart app over WiFi on iOS and Android
- Uses a TFT touch panel on the chiller to display temperature, water flow, and fault warnings
- Circulates water through a pump designed for quiet, low-consumption operation
How the specs affect everyday use
| Spec | What it means for you |
|---|---|
| 1 HP cooling and heating chiller | The same chiller handles both cooling and heating, giving you control over water temperature without needing separate equipment. |
| 37°F to 104°F, adjustable | Use the tub for cold immersion, warmer water sessions, or as part of a contrast routine. |
| 73°F to 42°F in about 1.5 hours (100L, 59°F ambient) | You can cool the water ahead of a session instead of relying on ice. Actual cooling time varies with water volume and surrounding temperature, so a hot garage will usually take longer than a climate-controlled basement. |
| Interior 63 in L by 30 in W by 17 in H | The manufacturer rates the tub for users up to 6 feet 5 inches. The 17-inch depth gives you a seated plunge rather than the deeper immersion of the XL model. |
| Exterior 67 in L by 30 in W by 23 in H | Measure the installation area and leave enough room beside the tub for the chiller and proper ventilation. |
| Supports 1,215 lbs when filled | A solid ground-floor, garage, or basement surface is generally the easiest setup. Deck installations should be checked by a contractor or structural engineer first. |
| Ozone generator with adjustable cycle | The built-in ozone function helps with routine water care between water changes. |
| Tuya Smart app on WiFi | Adjust temperature from your phone before a session. The app works with 2.4GHz WiFi networks. |
| 750W on a dedicated 15A 120V circuit | The unit uses standard household voltage but requires its own electrical circuit. Confirm this before delivery. |
| Acrylic shell | The rigid molded surface is easy to wipe down and carries a 2-year residential warranty against structural failure and surface defects. |
What ships with it
- Cold Plunge Pro acrylic tub with leveling feet, drain connector, and LED light
- GD-10-HC chiller with cooling, heating, ozone, and filtration
- Two connection hoses for inlet and outlet
- Cartridge filter
- Owner's manual and warranty certificate
Full specifications
| Tub material | Acrylic |
| Exterior dimensions | 67 in L by 30 in W by 23 in H |
| Interior dimensions | 63 in L by 30 in W by 17 in H |
| User capacity | Individuals up to 6 feet 5 inches |
| Required surface rating | 1,215 lbs |
| Chiller model | GD-10-HC, cooling and heating |
| Chiller capacity | 1 HP |
| Temperature range | 37°F to 104°F, adjustable |
| Cooling rate | 100 liters from 73°F to 42°F in approximately 1.5 hours at 59°F ambient |
| Refrigerant | R410A |
| Total wattage | 750W |
| Power requirement | Dedicated 15 amp 120V circuit, plug and play, leakage protection built into the cord |
| Voltage | 110V 60Hz |
| Disinfection | Ozone generator, adjustable cycle up to 5 minutes |
| Filtration | Built-in strainer plus replaceable cartridge filter |
| Controls | TFT touch panel on the chiller, plus Tuya Smart app on iOS and Android over 2.4GHz WiFi |
| Chiller weight | Approximately 110 lbs, with a carry handle |
| Chiller operating ambient | 37°F to 104°F |
| Warranty | Residential use. 2 years acrylic shell, 1 year electrical, 1 year components. Commercial applications excluded. |
Documents
Setup and first use
- Level the tub using its adjustable feet before filling
- Leave the chiller standing upright for 24 hours after delivery before switching it on so the refrigerant can settle
- Connect the inlet and outlet hoses hand-tight and use Teflon tape on the drain connector
- Fill the tub to approximately 5 inches below the rim indoors or 3 inches below the rim outdoors
- Keep the water level above the chiller inlet so circulation can operate correctly
- Never switch on the chiller before the tub has been filled
Shipping and delivery
The Cold Plunge Pro ships by freight with standard curbside delivery. The carrier will contact you before arrival to arrange a delivery appointment. White glove delivery and installation are also available as paid add-ons, with pricing based on your ZIP code.
Measure doorways, hallways, turns, and the final installation area before delivery. When the shipment arrives, inspect the crate before signing and note any visible damage on the bill of lading, since freight damage is excluded from the manufacturer warranty.
Financing is available at checkout. For a delivery quote or help confirming whether the Cold Plunge Pro will fit your space, call 866-861-6317, 9am to 6pm EST, Monday to Friday.
Frequently asked questions
How cold does it actually get?
The minimum setting is 37°F. Cooling time depends on the amount of water in the tub and the surrounding temperature. The manufacturer rates the chiller to cool 100 liters from 73°F to 42°F in approximately 1.5 hours at an ambient temperature of 59°F. Cooling will generally take longer in a hot garage or warm outdoor environment.
How tall a person does it fit?
The manufacturer rates the Cold Plunge Pro for users up to 6 feet 5 inches. Interior dimensions are 63 inches long by 30 inches wide by 17 inches deep. Buyers who want more room or deeper immersion can move up to the Cold Plunge Pro XL, which has a 70-inch interior length and 23-inch depth.
Does it heat as well as chill?
Yes. The chiller both cools and heats, with an adjustable range from 37°F to 104°F. This allows you to use the same tub for cold immersion or warm water sessions.
Do I need an electrician?
The unit is plug and play on 110V, so electrical work is generally unnecessary if you already have the correct outlet. The manufacturer does require a dedicated 15 amp circuit, with total draw rated at 750W. If your intended outlet shares a circuit with other equipment, have an electrician install a dedicated line before delivery. A leakage protection device is built into the power cord and should be tested monthly.
What does the floor need to hold?
Plan for a level surface rated to support 1,215 lbs. Ground-floor, garage, and basement installations are common. For a deck, have a contractor or structural engineer confirm the load capacity before delivery. If you plan to install the tub on pavers, the manual specifies pavers at least 2 inches thick and 12 inches square and notes that occasional re-leveling may be required.
Can I control it from my phone?
Yes. The chiller connects to the Tuya Smart app on iOS and Android through WiFi. You can use the app to adjust temperature and check system information before a session. The app works with 2.4GHz WiFi networks.
How do I keep the water clean?
The chiller includes an ozone disinfection cycle that can run automatically at an interval you select, for up to 5 minutes. The internal strainer should be cleaned approximately every 4 weeks, while the cartridge filter is typically replaced around every two months. A low-water-flow warning on the display can also indicate that the filter needs attention.
Can I install it outside?
The tub can be installed outdoors, but the chiller needs protection from direct sun, rain, and snow. Before outdoor temperatures reach 32°F, drain the chiller completely through the rear drain to help prevent freeze damage. For outdoor installations, the manufacturer recommends filling the tub to about 3 inches below the rim.
Can I put this in my gym or studio?
Not under the standard manufacturer warranty. Luxury Spas excludes commercial applications from coverage on this model. If you are buying for a gym, studio, clinic, or other commercial facility, call 866-861-6317 and we can recommend a cold plunge with commercial warranty terms.
Financing for Recovery and Fitness Equipment
Buying for yourself, spread the cost through Affirm at checkout. Buying for a gym, clinic, spa, or studio, apply with one of four business lenders and put the whole room on a single application.
RecovAthlete has no control over any financing decision. Approval is based on your creditworthiness and is solely the lender's decision.
Personal purchase
Affirm at checkout. Rates run 0% to 36% APR based on your credit profile. Soft check to prequalify, so no impact on your score. No prepayment penalty.
Business purchase
Brickhouse Capital, Reliant Capital, Acorn Finance, or KWIPPED. Apply with two of the four and compare. Financed equipment can qualify for a Section 179 deduction. Confirm with your accountant.
Financing by Equipment Category
Every page below has real prices, real monthly payment examples, and the lender comparison for that category. Pick the one you are buying.
Hyperbaric Chamber Financing
Soft-shell and hard-shell HBOT chambers. Session-volume payback math for clinics.
Sauna Financing
Infrared, traditional, barrel, and commercial saunas.
Cold Plunge Financing
Home tubs through commercial chillers and Medical Frozen units.
Red Light Therapy Financing
Panels, pods, and full-body beds for home and clinic.
PEMF Therapy Financing
PEMF mats, systems, and practitioner devices.
Vibration Plate Financing
Whole body vibration platforms for home, studio, and clinic.
Gym Equipment Financing
Home gyms through full commercial strength floors. Finance the floor, not the machine.
Treadmill Financing
Walking pads, commercial belts, and self-powered curved decks.
Commercial Recovery Equipment Financing
Building a recovery room? One quote, one purchase order, one application.
Building a Recovery Room?
Most business buyers are not buying one machine. They are building a room. Sauna, cold plunge, red light, vibration, hyperbaric, cryotherapy, and halotherapy all finance on the same paper through the same four lenders, and RecovAthlete quotes every category on one purchase order.
That means one freight schedule, one install window, and one financing application instead of six. It also gets you a better rate, because a bigger number on one application beats six small ones with six hard inquiries.
See commercial recovery equipment financing, or call 866-861-6317 and we will price the room.
Which Lender Should You Apply With?
| Lender | Type | Amount | Speed | Best for |
|---|---|---|---|---|
| Affirm | Consumer, at checkout | Order total | Seconds | Personal purchases. 0% to 36% APR based on credit. Soft check to prequalify. |
| Brickhouse Capital | Direct equipment lender | Up to $250K on a one-page application, $1M+ with financials | ~24 hours | A full room or a full floor. Credit decisions made in-house. Tied to the business, not your personal credit report. |
| Reliant Capital | Lender and broker | Up to $500K application-only, $5M with financials | 2 to 4 hours | Medical, aesthetic, and wellness. Deferred payment options. New or used equipment. |
| Acorn Finance | Lending marketplace | $1,000 to $100,000 | 60 seconds to prequalify | Comparing offers. One application goes to 30 or more lenders with no impact to your score. |
| KWIPPED (APPROVE) | Lender marketplace | Minimum $1,500 equipment value | 60-second application | Larger commercial orders. Lenders compete, which usually returns the best APR. Businesses only. |
Apply with two of the four and compare. It costs nothing and the spread between offers is often significant.
Apply now
Apply with Brickhouse Capital
Apply with Reliant Capital
Check your offers with Acorn Finance
For KWIPPED, call 866-861-6317 or email info@recovathlete.com and we will build the application around your order.
Financing Questions
What are Affirm's rates?
Pay in 4 splits the purchase into four interest-free payments charged every two weeks. Monthly installments spread the cost over a longer term, with rates from 0% to 36% APR depending on your credit profile. You see the exact terms before you agree to anything. No origination fees, no prepayment penalty, no late fees.
Will applying hurt my credit score?
Prequalification does not. Affirm and Acorn Finance both run a soft check to show you offers, which has no impact on your score. Proceeding with a monthly installment plan or a business loan may involve a hard inquiry. That is why it pays to prequalify with more than one lender first and only proceed with the best offer.
Can I finance equipment for a business?
Yes, and for most business buyers it is the better route. Brickhouse funds up to $250,000 on a one-page application with no financial statements. Reliant approves in 2 to 4 hours. Business financing is usually tied to the business rather than your personal credit report, and financed equipment can qualify for a Section 179 deduction. Confirm the tax position with your accountant.
Should I finance each machine separately?
No. This is the most common and most expensive mistake. Separate applications mean separate hard inquiries, separate payments, and a worse rate on each, because every individual ticket is small. Get one quote from RecovAthlete covering everything you are buying, including freight, and put that single number on one application.
Does Section 179 apply to financed equipment?
Financed equipment can qualify. Section 179 lets US businesses deduct the cost of qualifying equipment in the year it is placed in service, and financing the purchase does not by itself disqualify it. The equipment must be in service, not merely ordered, within the tax year. Annual limits and eligibility rules are set by the IRS and change year to year, so consult your accountant.
Can freight and installation be financed?
Freight, yes. On Affirm it is part of the order total at checkout. On business financing, put freight on the RecovAthlete quote and the whole quote amount goes on the application. Installation and room construction are harder, because some equipment lenders will not fund non-equipment costs. Ask the lender before you sign.
Can I pay off early?
Yes. Affirm charges no prepayment penalties. Acorn Finance and most business lenders also allow early payoff without penalty.
Not sure which option fits?
Tell us what you are buying and whether it is personal or for a business. We will point you at the right two lenders and quote freight and install as one number, which is also the number that goes on the application.
Call 866-861-6317 Book a 30 minute callLuxury Spas Cold Plunge Pro: acrylic cold plunge with 1 HP cooling and heating from 37°F to 104°F
The Cold Plunge Pro is the standard-size model in the Luxury Spas lineup. Its interior measures 63 inches long by 30 inches wide by 17 inches deep, with a manufacturer-rated user height of up to 6 feet 5 inches. The exterior footprint is 67 inches long by 30 inches wide by 23 inches high, making it a practical option for garages, home gyms, basements, and spare rooms without permanent plumbing or major construction.
The tub pairs with a self-contained GD-10-HC chiller positioned alongside it and connected by two hoses. The chiller handles cooling, heating, filtration, and ozone disinfection from one cabinet. You can control settings from the TFT touch panel or through the Tuya Smart app on your phone.
This plug and play cold plunge tub works well for home gyms, garages, basements, and covered patios. Fill it with a hose, connect it to a dedicated 15 amp 120V circuit, choose your temperature, and it is ready for regular use. Cold immersion sessions are commonly kept short, often around 2 to 5 minutes depending on experience and personal routine.
Compared with a basic stock tank and separate chiller, the Cold Plunge Pro combines temperature control with built-in filtration and ozone water care. It also offers a more permanent setup than an inflatable plunge. A few limits are worth knowing before you order: 37°F is the minimum setting, the chiller requires its own circuit, and the manufacturer warranty applies to residential use only. Taller users, or anyone looking for a deeper basin, may prefer the Cold Plunge Pro XL.
Authorized Luxury Spas dealer. RecovAthlete is an authorized dealer of Luxury Spas USA. Every unit ships factory direct with the full manufacturer warranty honored. For fit or install questions, call 866-861-6317, 9am to 6pm EST, Monday to Friday.
Important: read before you order
Power. Total draw is 750W, and the manufacturer requires a dedicated 15 amp 120V circuit. The system itself is plug and play, but the outlet should not share a circuit with equipment such as a freezer, compressor, or other high-draw appliances. If needed, have an electrician install a dedicated line before delivery. A leakage protection device is built into the power cord and should be tested monthly.
Placement. The tub needs a level surface rated to support 1,215 lbs. If you plan to install it on a deck, have a contractor or structural engineer confirm the load capacity beforehand. The chiller should sit at the same level as the tub, at least 60 inches from other electrical appliances, with enough space around the vents for airflow. Hose access is also needed for filling.
Residential use. The Luxury Spas warranty applies to residential installations only. Commercial applications are excluded. If you are buying for a gym, studio, clinic, or other commercial facility, call us before ordering and we can recommend an option with commercial warranty terms.
Best for
Users up to 6 feet 5 inches. Athletes using cold immersion regularly. Home gym, garage, and basement installations with a dedicated 15 amp circuit. Buyers who want both cold and warm water from one tub. Anyone looking for built-in filtration and ozone water care instead of a basic tub-and-chiller setup.
Not ideal for
Commercial facilities, since commercial use is excluded from the manufacturer warranty. Users over 6 feet 5 inches or anyone who wants a deeper basin, who may prefer the Cold Plunge Pro XL with its 23-inch interior depth. It is also not suited to locations without a dedicated 15 amp circuit, buyers who want temperatures below 37°F without adding ice, or fully exposed outdoor locations where the chiller would sit in direct sun, rain, or snow.
Why RecovAthlete carries this
Many cold plunges are either simple tubs paired with an external chiller or larger commercial systems designed for facilities. The Cold Plunge Pro sits between those options. You get a molded acrylic tub paired with a chiller that handles cooling, heating, filtration, and ozone disinfection.
Water care is another reason we like this setup. The adjustable ozone cycle and replaceable cartridge filter reduce how much routine maintenance depends on manually draining and cleaning the tub. That makes it easier to keep the plunge ready for regular use.
Cold Plunge Pro vs Cold Plunge Pro XL
Both models use the same chiller and control system. Your choice mainly comes down to available space, your height, and whether you want a deeper basin.
| Spec | Cold Plunge Pro | Cold Plunge Pro XL |
|---|---|---|
| User height rating | Up to 6 ft 5 in | Up to 6 ft 9 in |
| Interior length | 63 in | 70 in |
| Interior depth | 17 in | 23 in |
| Exterior footprint | 67 in L by 30 in W by 23 in H | 75 in L by 32 in W by 28 in H |
| Chiller | GD-10-HC, 1 HP, cooling and heating | GD-10-HC, 1 HP, cooling and heating |
| Temperature range | 37°F to 104°F | 37°F to 104°F |
| Power | 750W, dedicated 15A 120V circuit | 750W, dedicated 15A 120V circuit |
| Water care | Ozone cycle, strainer, cartridge filter | Ozone cycle, strainer, cartridge filter |
| Control | TFT panel plus Tuya Smart app | TFT panel plus Tuya Smart app |
| Warranty | Residential only | Residential only |
Cooling performance is the same on both models. Choose the standard Pro if its 63-inch interior and smaller footprint suit your space. Move up to the XL if you need additional length or a deeper basin.
See it in operation
Who buys the Cold Plunge Pro
- Athletes using cold immersion daily or several times per week
- CrossFit, BJJ, MMA, and endurance athletes incorporating cold exposure into recovery routines
- Home gym owners who want cold and warm water in one setup
- Sauna users adding cold immersion or contrast sessions at home
- Buyers moving up from a stock tank or inflatable plunge to a permanent acrylic tub
What the Cold Plunge Pro does
- Cools water down to 37°F and heats it up to 104°F, with adjustment throughout the range
- Cools 100 liters of water from 73°F to 42°F in approximately 1.5 hours at 59°F ambient temperature
- Accommodates users up to 6 feet 5 inches in a 63-inch interior
- Runs an adjustable ozone disinfection cycle of up to 5 minutes
- Filters water through a built-in strainer and replaceable cartridge filter
- Connects to the Tuya Smart app over WiFi on iOS and Android
- Uses a TFT touch panel on the chiller to display temperature, water flow, and fault warnings
- Circulates water through a pump designed for quiet, low-consumption operation
How the specs affect everyday use
| Spec | What it means for you |
|---|---|
| 1 HP cooling and heating chiller | The same chiller handles both cooling and heating, giving you control over water temperature without needing separate equipment. |
| 37°F to 104°F, adjustable | Use the tub for cold immersion, warmer water sessions, or as part of a contrast routine. |
| 73°F to 42°F in about 1.5 hours (100L, 59°F ambient) | You can cool the water ahead of a session instead of relying on ice. Actual cooling time varies with water volume and surrounding temperature, so a hot garage will usually take longer than a climate-controlled basement. |
| Interior 63 in L by 30 in W by 17 in H | The manufacturer rates the tub for users up to 6 feet 5 inches. The 17-inch depth gives you a seated plunge rather than the deeper immersion of the XL model. |
| Exterior 67 in L by 30 in W by 23 in H | Measure the installation area and leave enough room beside the tub for the chiller and proper ventilation. |
| Supports 1,215 lbs when filled | A solid ground-floor, garage, or basement surface is generally the easiest setup. Deck installations should be checked by a contractor or structural engineer first. |
| Ozone generator with adjustable cycle | The built-in ozone function helps with routine water care between water changes. |
| Tuya Smart app on WiFi | Adjust temperature from your phone before a session. The app works with 2.4GHz WiFi networks. |
| 750W on a dedicated 15A 120V circuit | The unit uses standard household voltage but requires its own electrical circuit. Confirm this before delivery. |
| Acrylic shell | The rigid molded surface is easy to wipe down and carries a 2-year residential warranty against structural failure and surface defects. |
What ships with it
- Cold Plunge Pro acrylic tub with leveling feet, drain connector, and LED light
- GD-10-HC chiller with cooling, heating, ozone, and filtration
- Two connection hoses for inlet and outlet
- Cartridge filter
- Owner's manual and warranty certificate
Full specifications
| Tub material | Acrylic |
| Exterior dimensions | 67 in L by 30 in W by 23 in H |
| Interior dimensions | 63 in L by 30 in W by 17 in H |
| User capacity | Individuals up to 6 feet 5 inches |
| Required surface rating | 1,215 lbs |
| Chiller model | GD-10-HC, cooling and heating |
| Chiller capacity | 1 HP |
| Temperature range | 37°F to 104°F, adjustable |
| Cooling rate | 100 liters from 73°F to 42°F in approximately 1.5 hours at 59°F ambient |
| Refrigerant | R410A |
| Total wattage | 750W |
| Power requirement | Dedicated 15 amp 120V circuit, plug and play, leakage protection built into the cord |
| Voltage | 110V 60Hz |
| Disinfection | Ozone generator, adjustable cycle up to 5 minutes |
| Filtration | Built-in strainer plus replaceable cartridge filter |
| Controls | TFT touch panel on the chiller, plus Tuya Smart app on iOS and Android over 2.4GHz WiFi |
| Chiller weight | Approximately 110 lbs, with a carry handle |
| Chiller operating ambient | 37°F to 104°F |
| Warranty | Residential use. 2 years acrylic shell, 1 year electrical, 1 year components. Commercial applications excluded. |
Documents
Setup and first use
- Level the tub using its adjustable feet before filling
- Leave the chiller standing upright for 24 hours after delivery before switching it on so the refrigerant can settle
- Connect the inlet and outlet hoses hand-tight and use Teflon tape on the drain connector
- Fill the tub to approximately 5 inches below the rim indoors or 3 inches below the rim outdoors
- Keep the water level above the chiller inlet so circulation can operate correctly
- Never switch on the chiller before the tub has been filled
Shipping and delivery
The Cold Plunge Pro ships by freight with standard curbside delivery. The carrier will contact you before arrival to arrange a delivery appointment. White glove delivery and installation are also available as paid add-ons, with pricing based on your ZIP code.
Measure doorways, hallways, turns, and the final installation area before delivery. When the shipment arrives, inspect the crate before signing and note any visible damage on the bill of lading, since freight damage is excluded from the manufacturer warranty.
Financing is available at checkout. For a delivery quote or help confirming whether the Cold Plunge Pro will fit your space, call 866-861-6317, 9am to 6pm EST, Monday to Friday.
Frequently asked questions
How cold does it actually get?
The minimum setting is 37°F. Cooling time depends on the amount of water in the tub and the surrounding temperature. The manufacturer rates the chiller to cool 100 liters from 73°F to 42°F in approximately 1.5 hours at an ambient temperature of 59°F. Cooling will generally take longer in a hot garage or warm outdoor environment.
How tall a person does it fit?
The manufacturer rates the Cold Plunge Pro for users up to 6 feet 5 inches. Interior dimensions are 63 inches long by 30 inches wide by 17 inches deep. Buyers who want more room or deeper immersion can move up to the Cold Plunge Pro XL, which has a 70-inch interior length and 23-inch depth.
Does it heat as well as chill?
Yes. The chiller both cools and heats, with an adjustable range from 37°F to 104°F. This allows you to use the same tub for cold immersion or warm water sessions.
Do I need an electrician?
The unit is plug and play on 110V, so electrical work is generally unnecessary if you already have the correct outlet. The manufacturer does require a dedicated 15 amp circuit, with total draw rated at 750W. If your intended outlet shares a circuit with other equipment, have an electrician install a dedicated line before delivery. A leakage protection device is built into the power cord and should be tested monthly.
What does the floor need to hold?
Plan for a level surface rated to support 1,215 lbs. Ground-floor, garage, and basement installations are common. For a deck, have a contractor or structural engineer confirm the load capacity before delivery. If you plan to install the tub on pavers, the manual specifies pavers at least 2 inches thick and 12 inches square and notes that occasional re-leveling may be required.
Can I control it from my phone?
Yes. The chiller connects to the Tuya Smart app on iOS and Android through WiFi. You can use the app to adjust temperature and check system information before a session. The app works with 2.4GHz WiFi networks.
How do I keep the water clean?
The chiller includes an ozone disinfection cycle that can run automatically at an interval you select, for up to 5 minutes. The internal strainer should be cleaned approximately every 4 weeks, while the cartridge filter is typically replaced around every two months. A low-water-flow warning on the display can also indicate that the filter needs attention.
Can I install it outside?
The tub can be installed outdoors, but the chiller needs protection from direct sun, rain, and snow. Before outdoor temperatures reach 32°F, drain the chiller completely through the rear drain to help prevent freeze damage. For outdoor installations, the manufacturer recommends filling the tub to about 3 inches below the rim.
Can I put this in my gym or studio?
Not under the standard manufacturer warranty. Luxury Spas excludes commercial applications from coverage on this model. If you are buying for a gym, studio, clinic, or other commercial facility, call 866-861-6317 and we can recommend a cold plunge with commercial warranty terms.
30 Day Return Policy
You can return any item purchased from Luxury Spas USA within 30 days of receipt if the item is brand new and uninstalled. The item should be in its new and original condition (including: packaging, manuals, accessories, original crate, etc.). Refunds will be processed within 3 business days from the time the return is received at our warehouse.
Due to the high risk of damage when shipped back to our location, you must package the product the same way you received it including any shrink wrap, tape and form. This will help prevent damages back to us. Damaged packages shipped back to us due to poor packaging may result in a restocking fee of up to 25%.
The customer must pay all costs related to the original shipping and return shipping charges even if shipping was free. After receiving and inspecting the returned merchandise, we will reimburse your credit card for the purchase price of the item, less the original shipping fee, return shipping fee, and less a restocking fee of 15%.
DEFECTIVE PRODUCTS POLICY
Please open and inspect all items once they arrive. You have up to 30 days from the date of delivery to notify us of any broken or defective items. If you receive a broken or defective product please contact us at 1.866.220.7405. Defective or broken items will be replaced or repaired at no charge once we receive notification of the defect or damage. After 30 days, any broken or defective items will be covered under our standard warranty policy which can be found under our Terms and Conditions.
CANCELLATION POLICY
Orders can be cancelled within 48 hours if the order has not been shipped yet. Most orders are normally shipped out within 24 hours. If you cancel the order after the order has been shipped out , you will be charged the for the original and return shipping charges and any re-consignment fees imposed by the trucking company.
All orders that are canceled will be credited in the original form of payment used when the order was placed.
SALES TAX
Applicable sales tax will be charged on the total invoice amount for all orders delivered to VA. There will be no sales tax on charged on shipments delivered outside of VA.
DUTIES AND TAXES
Duties and taxes must be collected on all shipments being delivered to Canada. Duties and taxes are collected separately by a third party customs broker. If you do not choose your own broker, luxury.com will select one for you. Luxury Spas USA can provide you an estimate of the duties and taxes prior to purchase upon request.
Luxury Spas Cold Plunge Pro: acrylic cold plunge with 1 HP cooling and heating from 37°F to 104°F
The Cold Plunge Pro is the standard-size model in the Luxury Spas lineup. Its interior measures 63 inches long by 30 inches wide by 17 inches deep, with a manufacturer-rated user height of up to 6 feet 5 inches. The exterior footprint is 67 inches long by 30 inches wide by 23 inches high, making it a practical option for garages, home gyms, basements, and spare rooms without permanent plumbing or major construction.
The tub pairs with a self-contained GD-10-HC chiller positioned alongside it and connected by two hoses. The chiller handles cooling, heating, filtration, and ozone disinfection from one cabinet. You can control settings from the TFT touch panel or through the Tuya Smart app on your phone.
This plug and play cold plunge tub works well for home gyms, garages, basements, and covered patios. Fill it with a hose, connect it to a dedicated 15 amp 120V circuit, choose your temperature, and it is ready for regular use. Cold immersion sessions are commonly kept short, often around 2 to 5 minutes depending on experience and personal routine.
Compared with a basic stock tank and separate chiller, the Cold Plunge Pro combines temperature control with built-in filtration and ozone water care. It also offers a more permanent setup than an inflatable plunge. A few limits are worth knowing before you order: 37°F is the minimum setting, the chiller requires its own circuit, and the manufacturer warranty applies to residential use only. Taller users, or anyone looking for a deeper basin, may prefer the Cold Plunge Pro XL.
Authorized Luxury Spas dealer. RecovAthlete is an authorized dealer of Luxury Spas USA. Every unit ships factory direct with the full manufacturer warranty honored. For fit or install questions, call 866-861-6317, 9am to 6pm EST, Monday to Friday.
Important: read before you order
Power. Total draw is 750W, and the manufacturer requires a dedicated 15 amp 120V circuit. The system itself is plug and play, but the outlet should not share a circuit with equipment such as a freezer, compressor, or other high-draw appliances. If needed, have an electrician install a dedicated line before delivery. A leakage protection device is built into the power cord and should be tested monthly.
Placement. The tub needs a level surface rated to support 1,215 lbs. If you plan to install it on a deck, have a contractor or structural engineer confirm the load capacity beforehand. The chiller should sit at the same level as the tub, at least 60 inches from other electrical appliances, with enough space around the vents for airflow. Hose access is also needed for filling.
Residential use. The Luxury Spas warranty applies to residential installations only. Commercial applications are excluded. If you are buying for a gym, studio, clinic, or other commercial facility, call us before ordering and we can recommend an option with commercial warranty terms.
Best for
Users up to 6 feet 5 inches. Athletes using cold immersion regularly. Home gym, garage, and basement installations with a dedicated 15 amp circuit. Buyers who want both cold and warm water from one tub. Anyone looking for built-in filtration and ozone water care instead of a basic tub-and-chiller setup.
Not ideal for
Commercial facilities, since commercial use is excluded from the manufacturer warranty. Users over 6 feet 5 inches or anyone who wants a deeper basin, who may prefer the Cold Plunge Pro XL with its 23-inch interior depth. It is also not suited to locations without a dedicated 15 amp circuit, buyers who want temperatures below 37°F without adding ice, or fully exposed outdoor locations where the chiller would sit in direct sun, rain, or snow.
Why RecovAthlete carries this
Many cold plunges are either simple tubs paired with an external chiller or larger commercial systems designed for facilities. The Cold Plunge Pro sits between those options. You get a molded acrylic tub paired with a chiller that handles cooling, heating, filtration, and ozone disinfection.
Water care is another reason we like this setup. The adjustable ozone cycle and replaceable cartridge filter reduce how much routine maintenance depends on manually draining and cleaning the tub. That makes it easier to keep the plunge ready for regular use.
Cold Plunge Pro vs Cold Plunge Pro XL
Both models use the same chiller and control system. Your choice mainly comes down to available space, your height, and whether you want a deeper basin.
| Spec | Cold Plunge Pro | Cold Plunge Pro XL |
|---|---|---|
| User height rating | Up to 6 ft 5 in | Up to 6 ft 9 in |
| Interior length | 63 in | 70 in |
| Interior depth | 17 in | 23 in |
| Exterior footprint | 67 in L by 30 in W by 23 in H | 75 in L by 32 in W by 28 in H |
| Chiller | GD-10-HC, 1 HP, cooling and heating | GD-10-HC, 1 HP, cooling and heating |
| Temperature range | 37°F to 104°F | 37°F to 104°F |
| Power | 750W, dedicated 15A 120V circuit | 750W, dedicated 15A 120V circuit |
| Water care | Ozone cycle, strainer, cartridge filter | Ozone cycle, strainer, cartridge filter |
| Control | TFT panel plus Tuya Smart app | TFT panel plus Tuya Smart app |
| Warranty | Residential only | Residential only |
Cooling performance is the same on both models. Choose the standard Pro if its 63-inch interior and smaller footprint suit your space. Move up to the XL if you need additional length or a deeper basin.
See it in operation
Who buys the Cold Plunge Pro
- Athletes using cold immersion daily or several times per week
- CrossFit, BJJ, MMA, and endurance athletes incorporating cold exposure into recovery routines
- Home gym owners who want cold and warm water in one setup
- Sauna users adding cold immersion or contrast sessions at home
- Buyers moving up from a stock tank or inflatable plunge to a permanent acrylic tub
What the Cold Plunge Pro does
- Cools water down to 37°F and heats it up to 104°F, with adjustment throughout the range
- Cools 100 liters of water from 73°F to 42°F in approximately 1.5 hours at 59°F ambient temperature
- Accommodates users up to 6 feet 5 inches in a 63-inch interior
- Runs an adjustable ozone disinfection cycle of up to 5 minutes
- Filters water through a built-in strainer and replaceable cartridge filter
- Connects to the Tuya Smart app over WiFi on iOS and Android
- Uses a TFT touch panel on the chiller to display temperature, water flow, and fault warnings
- Circulates water through a pump designed for quiet, low-consumption operation
How the specs affect everyday use
| Spec | What it means for you |
|---|---|
| 1 HP cooling and heating chiller | The same chiller handles both cooling and heating, giving you control over water temperature without needing separate equipment. |
| 37°F to 104°F, adjustable | Use the tub for cold immersion, warmer water sessions, or as part of a contrast routine. |
| 73°F to 42°F in about 1.5 hours (100L, 59°F ambient) | You can cool the water ahead of a session instead of relying on ice. Actual cooling time varies with water volume and surrounding temperature, so a hot garage will usually take longer than a climate-controlled basement. |
| Interior 63 in L by 30 in W by 17 in H | The manufacturer rates the tub for users up to 6 feet 5 inches. The 17-inch depth gives you a seated plunge rather than the deeper immersion of the XL model. |
| Exterior 67 in L by 30 in W by 23 in H | Measure the installation area and leave enough room beside the tub for the chiller and proper ventilation. |
| Supports 1,215 lbs when filled | A solid ground-floor, garage, or basement surface is generally the easiest setup. Deck installations should be checked by a contractor or structural engineer first. |
| Ozone generator with adjustable cycle | The built-in ozone function helps with routine water care between water changes. |
| Tuya Smart app on WiFi | Adjust temperature from your phone before a session. The app works with 2.4GHz WiFi networks. |
| 750W on a dedicated 15A 120V circuit | The unit uses standard household voltage but requires its own electrical circuit. Confirm this before delivery. |
| Acrylic shell | The rigid molded surface is easy to wipe down and carries a 2-year residential warranty against structural failure and surface defects. |
What ships with it
- Cold Plunge Pro acrylic tub with leveling feet, drain connector, and LED light
- GD-10-HC chiller with cooling, heating, ozone, and filtration
- Two connection hoses for inlet and outlet
- Cartridge filter
- Owner's manual and warranty certificate
Full specifications
| Tub material | Acrylic |
| Exterior dimensions | 67 in L by 30 in W by 23 in H |
| Interior dimensions | 63 in L by 30 in W by 17 in H |
| User capacity | Individuals up to 6 feet 5 inches |
| Required surface rating | 1,215 lbs |
| Chiller model | GD-10-HC, cooling and heating |
| Chiller capacity | 1 HP |
| Temperature range | 37°F to 104°F, adjustable |
| Cooling rate | 100 liters from 73°F to 42°F in approximately 1.5 hours at 59°F ambient |
| Refrigerant | R410A |
| Total wattage | 750W |
| Power requirement | Dedicated 15 amp 120V circuit, plug and play, leakage protection built into the cord |
| Voltage | 110V 60Hz |
| Disinfection | Ozone generator, adjustable cycle up to 5 minutes |
| Filtration | Built-in strainer plus replaceable cartridge filter |
| Controls | TFT touch panel on the chiller, plus Tuya Smart app on iOS and Android over 2.4GHz WiFi |
| Chiller weight | Approximately 110 lbs, with a carry handle |
| Chiller operating ambient | 37°F to 104°F |
| Warranty | Residential use. 2 years acrylic shell, 1 year electrical, 1 year components. Commercial applications excluded. |
Documents
Setup and first use
- Level the tub using its adjustable feet before filling
- Leave the chiller standing upright for 24 hours after delivery before switching it on so the refrigerant can settle
- Connect the inlet and outlet hoses hand-tight and use Teflon tape on the drain connector
- Fill the tub to approximately 5 inches below the rim indoors or 3 inches below the rim outdoors
- Keep the water level above the chiller inlet so circulation can operate correctly
- Never switch on the chiller before the tub has been filled
Shipping and delivery
The Cold Plunge Pro ships by freight with standard curbside delivery. The carrier will contact you before arrival to arrange a delivery appointment. White glove delivery and installation are also available as paid add-ons, with pricing based on your ZIP code.
Measure doorways, hallways, turns, and the final installation area before delivery. When the shipment arrives, inspect the crate before signing and note any visible damage on the bill of lading, since freight damage is excluded from the manufacturer warranty.
Financing is available at checkout. For a delivery quote or help confirming whether the Cold Plunge Pro will fit your space, call 866-861-6317, 9am to 6pm EST, Monday to Friday.
Frequently asked questions
How cold does it actually get?
The minimum setting is 37°F. Cooling time depends on the amount of water in the tub and the surrounding temperature. The manufacturer rates the chiller to cool 100 liters from 73°F to 42°F in approximately 1.5 hours at an ambient temperature of 59°F. Cooling will generally take longer in a hot garage or warm outdoor environment.
How tall a person does it fit?
The manufacturer rates the Cold Plunge Pro for users up to 6 feet 5 inches. Interior dimensions are 63 inches long by 30 inches wide by 17 inches deep. Buyers who want more room or deeper immersion can move up to the Cold Plunge Pro XL, which has a 70-inch interior length and 23-inch depth.
Does it heat as well as chill?
Yes. The chiller both cools and heats, with an adjustable range from 37°F to 104°F. This allows you to use the same tub for cold immersion or warm water sessions.
Do I need an electrician?
The unit is plug and play on 110V, so electrical work is generally unnecessary if you already have the correct outlet. The manufacturer does require a dedicated 15 amp circuit, with total draw rated at 750W. If your intended outlet shares a circuit with other equipment, have an electrician install a dedicated line before delivery. A leakage protection device is built into the power cord and should be tested monthly.
What does the floor need to hold?
Plan for a level surface rated to support 1,215 lbs. Ground-floor, garage, and basement installations are common. For a deck, have a contractor or structural engineer confirm the load capacity before delivery. If you plan to install the tub on pavers, the manual specifies pavers at least 2 inches thick and 12 inches square and notes that occasional re-leveling may be required.
Can I control it from my phone?
Yes. The chiller connects to the Tuya Smart app on iOS and Android through WiFi. You can use the app to adjust temperature and check system information before a session. The app works with 2.4GHz WiFi networks.
How do I keep the water clean?
The chiller includes an ozone disinfection cycle that can run automatically at an interval you select, for up to 5 minutes. The internal strainer should be cleaned approximately every 4 weeks, while the cartridge filter is typically replaced around every two months. A low-water-flow warning on the display can also indicate that the filter needs attention.
Can I install it outside?
The tub can be installed outdoors, but the chiller needs protection from direct sun, rain, and snow. Before outdoor temperatures reach 32°F, drain the chiller completely through the rear drain to help prevent freeze damage. For outdoor installations, the manufacturer recommends filling the tub to about 3 inches below the rim.
Can I put this in my gym or studio?
Not under the standard manufacturer warranty. Luxury Spas excludes commercial applications from coverage on this model. If you are buying for a gym, studio, clinic, or other commercial facility, call 866-861-6317 and we can recommend a cold plunge with commercial warranty terms.
Luxury Spas USA Warranty Overview
-
Applicability: Covers all Luxury Spas USA branded hot tubs bought directly from Luxury Spas USA Ltd and its authorized dealers. This certificate of warranty is non-transferable.
-
Shell Warranty (10 years):
- Protection against water loss due to structural failure for 10 years.
- 5-year guarantee for acrylic shell surface against water loss from material defects like cracks and delamination.
- Includes all necessary parts and labor for repairs.
-
Electrical Equipment and Plumbing (2 years):
- Guarantees pumps, heater, and control system against malfunctions from material and workmanship flaws for 2 years.
- Only parts covered for repairs, labor costs excluded.
- Warranty does not cover water leaks from pump and plumbing unions.
-
Other Spa Components (2 years):
- Guarantees components such as LED lights, fuses, and jet inserts against malfunctions from material and workmanship defects.
- Covers parts required for repairs; does not include labor expenses.
-
Spa Cover Warranty:
- Guarantees the spa cover against material defects for 30 days from delivery.
-
Warranty Terms:
- Valid for the initial purchaser at the initial installation address.
- Does not cover shipping costs for parts and charges for repairs from non-authorized centers.
- Written consent from Luxury Spas USA needed for any reimbursable repairs.
- Luxury Spas USA decides on the fault's nature and may replace the spa if deemed necessary, with the customer bearing installation costs.
-
Performance:
- Faults must be reported within 10 business days.
- Telephone diagnosis followed by a technician visit if needed.
- Charges for the technician visit apply if the issue is not manufacturing-related or covered by the warranty.
-
Additional Warranties (30 days):
- Cover, steps, light bulbs, headrests, skirt, and filter free of defects in workmanship or materials.
- One-year guarantee for other factory-installed components like LED light system, stereo, and jets.
-
Exclusions:
- Warranty void in cases of alteration, neglect, misuse, abuse, or damage from external causes.
- Does not cover items added or installed after sale, nor does it cover access to components.
- Commercial use completely voids warranty coverage.
- Headrest pillow damage after delivery not covered; pillows should be removed when not in use.
-
Service Requirements:
- Original invoice or sales receipt needed for warranty service.
- Guarantee service can be refused without proper documentation.
-
Disclaimers:
- Liability limited to the law's specifics, excluding indirect damages from defects.
- Maximum liability is the original purchase price.
- Coverage duration fixed and non-extendable. These terms apply equally to all services by Luxury Spas USA and its representatives.
Prior to filing a warranty claim, please contact our technical support department at 866.220.7405 to troubleshoot the issue over the phone. Once a technician determines that a repair or replacement is necessary, they will coordinate the response accordingly.
For warranty claims, please complete and detach the warranty registration card below and send it along with a valid sales receipt to the warranty claims department address below. You can also contact our warranty claim department at warranty@sunraysaunas.com.
Warranty claims will only be resolved with the repair of the current product or shipment of a replacement product. Improper use or installation or damage resulting from acts of nature is not covered under the spa warranty. No other warranties expressed or implied shall be in effect in lieu of the 10-2-2 warranty listed on the warranty certificate ( and explained above)and no responsibility is assumed for present or future damage due to misuse.
LUXURY SPAS USA
Attn: Claims Department
2501 Glen Center Street
Richmond, VA, 23233
Let customers speak for us
Have Questions? Talk to Our Equipment Team.
We respond within 2 hours.
US & Canada shipping. Financing available.
Recently viewed products
- Choosing a selection results in a full page refresh.
