866-861-6317
Ask an Expert




A Harvia steel chimney is sold as a base kit sized for a typical room. Taller rooms, or a roof further away than the kit allows, need extending. These are the parts that do it: the WHP1000500 extension in stainless steel and the WHP1000500M in black, plus the WHP-AS tilted accessory kit and the WHP-ASSYM and WHP-ASSYMM symmetric kits for the roof penetration. Harvia rates the assembled chimney as self-supporting to 3 metres indoors and 2 metres outdoors.
The extensions add length to the run. The accessory kits handle where the chimney leaves the building. The tilted kit suits a pitched roof, the symmetric kits a flat or near-flat penetration, and the M suffix on the WHP-ASSYMM means the black finish rather than stainless. Pick the finish to match the chimney you already have, because the two do not sit well together on a visible run.
Harvia rates the chimney self-supporting to 3 metres indoors and 2 metres outdoors. Past that it needs bracing, and bracing is a structural decision rather than a parts decision. If your run is longer than those figures, tell us before ordering so we can check what the installation needs.
Harvia publishes no pipe diameter and no section length for the WHP1000500 and WHP1000500M on its own product pages. The name and the 1550 mm carton imply a 1.5 metre section, but Harvia states neither the bore nor the length anywhere, so we will not print a figure we cannot source. Confirm the bore of your existing chimney with us before ordering. The three accessory kits, WHP-AS, WHP-ASSYM and WHP-ASSYMM, have no Harvia model page at all, so everything we hold on them comes from the supplier inventory sheet. Chimney work is a job for a certified installer and is usually subject to local permit.
BEST FOR
NOT IDEAL FOR
Swipe to see the full table
| Part | What it is | Finish | Packed length |
|---|---|---|---|
| WHP1000500 | Chimney extension, no kit | Stainless steel | 1550 mm |
| WHP1000500M | Chimney extension, no kit | Black | 1550 mm |
| WHP-AS | Chimney tilted accessory kit | Stainless steel | Not published by Harvia |
| WHP-ASSYM | Chimney symmetric accessory kit | Stainless steel | Not published by Harvia |
| WHP-ASSYMM | Chimney symmetric accessory kit | Black | Not published by Harvia |
| Self-supporting, indoors | Maximum unbraced run | 3 m | |
| Self-supporting, outdoors | Maximum unbraced run | 2 m |
For the pipe between the stove and the chimney rather than the chimney itself, see the Harvia smoke pipe and fittings. For a complete chimney rather than an extension, the Harvia WHP1500 chimney kit is the starting point. For the stove, see our wood burning sauna stoves.
Chimney parts are the easiest thing in this catalogue to order wrong, because the finish and the bore both have to match what is already on the building. Send us a photo of the existing run and the stove model and we will tell you which parts fit. We stock the pipe, the dampers and the flanges alongside these. Call 866-861-6317, 9am to 6pm EST, Monday to Friday, or book a call.
Harvia does not publish a bore or a section length for the WHP1000500 or the WHP1000500M on its product pages. Confirm your existing chimney bore with us before ordering rather than assuming from the part name.
Harvia rates the assembled chimney self-supporting to 3 metres indoors and 2 metres outdoors. A longer run needs bracing, which is a structural decision.
The tilted kit, WHP-AS, suits a pitched roof penetration. The symmetric kits, WHP-ASSYM in stainless and WHP-ASSYMM in black, suit a flat or near-flat penetration.
No. These are parts for the Harvia steel chimney system. A masonry chimney takes the WZ011115 masonry connector instead.
Easy Returns & Refunds Policy
30-Day Hassle-Free Returns
Return Conditions
How to Start a Return
Dealing with Damages & Issues
Exchanges
Refund Process
Secure Your Sauna Experience with RecovAthlete's' Harvia Electric Heater Warranty
Enjoy peace of mind with your Harvia Electric Sauna Heater purchase, backed by RecovAthlete's comprehensive limited warranty. This commitment guarantees that your sauna heater will be protected against defects in materials and workmanship, ensuring a seamless and worry-free experience.
Key Features of Your Warranty:
Coverage for Defects: Rest assured knowing that any defects in materials and workmanship are covered for a specified period. This includes one year for heating elements (coils) and five years for other sauna heater components from the date of delivery.
Exclusive to Original Purchaser: This warranty is specifically tailored to protect you, the original consumer, emphasizing our commitment to your satisfaction.
Variety of Remedies Available: In case of any defects, RecovAthlete offers multiple solutions:
Shipping Fees Covered for Returns: If returning the defective product is necessary, we'll handle the shipping costs, ensuring a hassle-free process.
Important Warranty Details:
Exclusions: Note that the warranty does not cover damages due to transportation, storage, improper use, lack of maintenance, unauthorized repairs, and wear and tear.
How to Claim: Simply contact our after-sales team at info@recovathlete.com with product details and a description of the defect during the warranty period.
Limitation of Liability: While we strive for excellence, our liability is limited to the actual amount paid for the defective product, excluding consequential or incidental damages.
By choosing Harvia Electric Sauna Heaters from RecovAthlete, you're not just buying a product; you're investing in a reliable and stress-free sauna experience. Our warranty is designed to ensure that your satisfaction remains our top priority.
Have Questions? Talk to Our Equipment Team.
We respond within 2 hours.
US & Canada shipping. Financing available.