866-861-6317
Ask an Expert









Every Harvia wood stove connects at 115 mm, and almost nobody orders all the parts that connect it. This page carries the pieces between the stove collar and the chimney: the WZ100M smoke pipe, the WZ115030SP damper, the WZ115120 reducing pipe, the WZ020115 lead-through flange, the WHP270SP and WHP270SPM smoke dampers, the WHM25 vapour barrier collar and the ZSB-485 air circulation grill for Club and Legend heaters. Harvia states these fit every Harvia wood-heated sauna heater except the Harvia 50, plus the Harvia 10 iron heater.
The WZ100M is a one metre length of 115 mm pipe. The WZ115030SP damper sits in that run and lets you throttle the draught once the fire has caught, which is how you stop a stove burning through a load in twenty minutes. The WHP270SP and WHP270SPM are larger insulated damper plates at 270 by 170 mm, which Harvia states suit all its steel chimneys. The WZ115120 steps a 115 mm collar up to a 120 mm chimney, the WZ020115 finishes a wall or ceiling penetration, and the WHM25 seals it.
The pipe needs its own clearance, separate from the stove, and this is the part people miss. A stove that clears its own safety distances can still fail on the pipe run, so measure both. The figures are in the table below.
An unshielded 115 mm smoke pipe needs 500 mm to combustible material at the front, behind and at each side, and 1000 mm to the ceiling. To non-combustible material the figure is 0 mm. Adding the WZ020130 radiation shield cuts the 500 mm to 250 mm. These are separate from your stove clearances and both have to be satisfied. Chimney work is a job for a certified installer and is usually subject to local permit. One fitment exception: Harvia excludes the Harvia 50, so if you own a PRO 50 check with us first.
BEST FOR
NOT IDEAL FOR
Swipe to see the full table
| Part | What it is | Size | Finish |
|---|---|---|---|
| WZ100M | Smoke pipe, 1 m | 115 mm diameter, 1000 mm long | Black |
| WZ115030SP | Damper | 115 mm diameter | Stainless steel |
| WZ115120 | Reducing pipe | 120 mm to 115 mm | Stainless steel |
| WZ020115 | Lead-through flange | For 115 mm pipe | Stainless steel |
| WHP270SP | Smoke damper, insulated | 270 by 170 mm | Steel |
| WHP270SPM | Smoke damper, insulated | Not published by Harvia | Black |
| WHM25 | Vapour barrier collar | 550 by 550 mm plate, 225 to 250 mm collar | Red |
| ZSB-485 | Air circulation grill, 3 pcs | Not published by Harvia | Stainless steel |
| Pipe clearance, combustible | Front, rear and each side | 500 mm | 0 mm to non-combustible |
| Pipe clearance, with WZ020130 shield | Front, rear and each side | 250 mm | |
| Pipe clearance, ceiling | Above the pipe | 1000 mm |
For the chimney itself rather than the pipe, see the Harvia steel chimney extensions and kits. If you need a stone-filled guard around the pipe inside the room, the Cilindro chimney cover WL300PC does that job. For the stove, see our wood burning sauna stoves.
Half the calls we take on wood stoves are someone who has the stove and is one fitting short. Tell us your stove model, your chimney bore and how the pipe leaves the room, and we will list the exact parts rather than have you guess from a diagram. Call 866-861-6317, 9am to 6pm EST, Monday to Friday, or book a call.
Harvia states they fit all its wood-heated sauna heaters except the Harvia 50, plus the Harvia 10 iron heater. Every current Harvia wood stove connects at 115 mm. If you own a PRO 50, check with us first.
500 mm to combustible material at the front, behind and each side, 0 mm to non-combustible, and 1000 mm to the ceiling. The WZ020130 radiation shield brings the 500 mm figure down to 250 mm.
No. The WZ115120 reducing pipe adapts a 115 mm stove collar to a 120 mm chimney.
Setting a pipe section or a damper is owner work. Anything touching the chimney or a wall penetration needs a certified installer and usually a local permit.
Easy Returns & Refunds Policy
30-Day Hassle-Free Returns
Return Conditions
How to Start a Return
Dealing with Damages & Issues
Exchanges
Refund Process
Secure Your Sauna Experience with RecovAthlete's' Harvia Electric Heater Warranty
Enjoy peace of mind with your Harvia Electric Sauna Heater purchase, backed by RecovAthlete's comprehensive limited warranty. This commitment guarantees that your sauna heater will be protected against defects in materials and workmanship, ensuring a seamless and worry-free experience.
Key Features of Your Warranty:
Coverage for Defects: Rest assured knowing that any defects in materials and workmanship are covered for a specified period. This includes one year for heating elements (coils) and five years for other sauna heater components from the date of delivery.
Exclusive to Original Purchaser: This warranty is specifically tailored to protect you, the original consumer, emphasizing our commitment to your satisfaction.
Variety of Remedies Available: In case of any defects, RecovAthlete offers multiple solutions:
Shipping Fees Covered for Returns: If returning the defective product is necessary, we'll handle the shipping costs, ensuring a hassle-free process.
Important Warranty Details:
Exclusions: Note that the warranty does not cover damages due to transportation, storage, improper use, lack of maintenance, unauthorized repairs, and wear and tear.
How to Claim: Simply contact our after-sales team at info@recovathlete.com with product details and a description of the defect during the warranty period.
Limitation of Liability: While we strive for excellence, our liability is limited to the actual amount paid for the defective product, excluding consequential or incidental damages.
By choosing Harvia Electric Sauna Heaters from RecovAthlete, you're not just buying a product; you're investing in a reliable and stress-free sauna experience. Our warranty is designed to ensure that your satisfaction remains our top priority.
Have Questions? Talk to Our Equipment Team.
We respond within 2 hours.
US & Canada shipping. Financing available.
