866-861-6317
Ask an Expert





Shipping $399
10-12 weeks
The frame is small, but a few checks stop the mistakes that happen after checkout.
The wooden frame is 28.7 inches wide by 35.4 inches long, under eight square feet. Allow open space around it to stand beside the chair, step off the pedal, and lie down for supine work. Handles reach 55.5 inches at the tallest setting, so a standard ceiling is fine.
The chair comes in eight upholstery colors. Anthracite Grey is standard, and the other seven are selected as a custom color at order. Pick the color before ordering, because the chair is then built to that choice.
Made to order, non-returnable
Each chair is built in the color you pick. BASI made-to-order equipment cannot be returned for change of mind. Confirm fit and color before ordering.
The chair is meant to stay assembled. Silicon wheels let one person roll it against a wall between clients.
The chair ships assembled with all four springs attached. Setup is fitting the two handles: slide each handle into the pole base and tighten the knob. No tools are needed for the handles or for splitting the pedal.
The chair ships by freight. A paid white glove option can place it in the room. Shipping and Warranty has the detail.
Have these ready before ordering
The BASI Systems Wunda Chair is a split-pedal Pilates chair for instructors, clinicians and advanced home practitioners. Model M BSE 117 01. Each pedal half works independently, so you can load left and right on their own. It adds standing, seated and single-leg work in under eight square feet.
It is also sold as the BASI Systems Pilates Stability Chair. The beech wood frame suits studios and clinics running standing, core and stability work.
RecovAthlete is an authorized BASI Systems dealer. Every order carries the full factory warranty and direct manufacturer support.
Best for
Not ideal for
Check before ordering
Built to order in the color you choose, and non-returnable for change of mind. Confirm color and room fit first.
See Before You Order for room, access and setup checks.
Not sure whether a chair or a second reformer is your best next piece? Book a 30 minute call and we will size it to your floor plan and class schedule.
Independent pedal halves for daily teaching and clinical work.
A single pedal, moving as one piece.
Lighter chairs for one or two users at home.
| Feature | BASI Wunda Chair | Classic single-pedal | Entry split-pedal |
|---|---|---|---|
| Pedal | Split, moves as two halves | Single, moves as one | Split, often unpadded |
| Frame | Beech wood, aluminum handle bases | Usually wood | Lighter frames |
| Spring settings | Four per rail, four springs | Varies | Fewer positions |
| Upgrade path | Prepared F2 ports | None | None |
| Best for | Daily studio and clinic work | Classical repertoire | Low-volume home use |
Swipe the table to see all columns.
Cross-shop the full BASI Systems range or other Pilates chairs.
A classic Wunda chair has one pedal that moves as a single unit. On this chair, pulling a metal ring releases a rod and each pedal half moves on its own. That allows single-leg and single-arm loading and side-to-side comparison. Slide the rod back in and the pedals move together again.
The F2 System is BASI's adjustable spring attachment. It adds finer control over spring angle and resistance and is sold separately. You do not need it on day one. The chair arrives with prepared ports, so the upgrade fits later without replacing the frame.
Standing balance, single-leg loading and upper-body pressing that a reformer alone does not cover. Instructors use it for core, stability and strength work, and clinics use the independent pedals for single-side loading. It complements a reformer rather than replacing one.
Chair work is loaded and unsupported, so many practitioners find it more demanding than the same movement on a reformer. That is why it suits taught studio and clinic settings. Most rooms run the chair and a reformer together.
The frame is 28.7 by 35.4 inches, under eight square feet. You need clear space around it to work. Before You Order sets out how much.
Yes. The frame ships built, with the four springs attached. Setup is fitting the two handles, no tools. Before You Order has the steps.
The wooden frame is 28.7 by 35.4 by 24.4 inches (73 by 90 by 62 cm). The seat is 21.8 by 16.9 inches (55 by 43 cm). With the handles fitted, height runs 46.3 to 55.5 inches (117.5 to 141 cm).
The chair ships with four springs, two yellow and two black. BASI does not label one color as a fixed weight, so use the combination your repertoire calls for. Add or remove springs for lighter or heavier loads.
Each pedal rail has four tension settings. Slide the stopper along the rail to step the load up or down between exercises. You never unhook a spring to change it.
The handles adjust to five height positions across the 46.3 to 55.5 inch range and lock in the base. That covers seated, kneeling and standing work for clients of different heights.
No, a made-to-order chair cannot be returned once your color is set. Warranty support still applies. Confirm fit and color first. Shipping and Warranty has the policy.
Inspect the springs weekly for gaps or kinks and replace any you find. BASI recommends replacing all springs after two years of use. Tighten nuts, bolts and screws monthly. Clean the upholstery with warm water and soap.
The current price is shown in the buy panel at the top of this page, and all eight colors are the same price. Affirm splits it into monthly payments for personal buyers. Studios and clinics can finance the chair through business lenders.
Yes. Affirm covers personal purchases at checkout, and business lenders cover studios and clinics. Financing has the options and how to put a full room order on one application.
The factory guide covers handle install, spring adjustment, pedal splitting and care. Read it before ordering to see exactly how the chair adjusts.
BASI Systems equipment is made to order. Your delivery window starts the day your order is confirmed and payment clears, not the day it ships. All orders ship standard curbside freight.
| Color Variant | Estimated Delivery |
|---|---|
| Anthracite Grey (basic color) | 6 to 8 weeks |
| All other color variants | 8 to 10 weeks |
These timeframes include production and shipping. Other colors add roughly two weeks because the frame goes through a separate finishing run.
| Stage | What Happens | Timing |
|---|---|---|
| Order processing | We confirm your order and color, then release it to the BASI production queue. | Included in window above |
| Production | Your equipment is built to order at the BASI factory. | 6 to 10 weeks by color |
| Dispatch | The unit leaves the factory and you receive an email confirmation. | Day it ships |
| Transit | Curbside freight to your address. The carrier calls to book a delivery appointment. | Included in window above |
Express shipping is not available. Because each piece is made to order, production time cannot be shortened by paying more for freight. Anthracite Grey at 6 to 8 weeks is the fastest route. If you are working to a studio opening date, call 866-861-6317 (9am to 6pm EST, Monday to Friday) before you order and we will check the current production queue for you.
Shipping is calculated automatically at checkout based on your order value and destination. Nothing is added after checkout. For volume or studio fit-out orders, contact us and we will consolidate the freight booking, which usually costs less than separate shipments. International orders ship by quote, with duties and customs handled separately.
Standard curbside delivery means the carrier brings your equipment as close to your dwelling as possible, provided there are no obstacles at the time of delivery. The driver does not bring the equipment inside, up stairs, or into a specific room.
Inside delivery and white glove delivery are available as paid add-ons and require special quoting, since cost depends on your address, access, and the piece you bought. Contact us for a quote before you place your order so the cost can be added at the start.
BASI Systems equipment ships in a recyclable honeycomb cardboard container that can be flattened for storage. Sustainable materials are part of how BASI builds and packs its equipment.
All shipping times listed are estimates and are not guaranteed. BASI Systems is not responsible for shipping delays regardless of cause, including carrier issues, weather conditions, customs processing, factory scheduling, or other circumstances beyond our control. If your order runs past the window above, call 866-861-6317 and we will request a current build date from the factory.
Have Questions? Talk to Our Equipment Team.
We respond within 2 hours.
US & Canada shipping. Financing available.


































