Space60 Upgrades

Three chairs are offered and only one fits at a time. Pick one.

How to read that table

The Electric Massage Chair covers the most of your body. Eight modes across neck, shoulders, back, waist, legs, and feet. If massage coverage is what you want, this is the one, not the more expensive option above it.

The Luxurious Multi Functional chair massages the back only. What it adds instead is the seat itself: cooling, heating, and an airbag headrest. One-button presets mean you are not holding a button while the chamber is at pressure.

It also glides forward and backward under power. That is the one feature that decides whether an older client can use your chamber without help.

A light panel that mounts inside the chamber, so the light runs during the session rather than before or after it.

Why there is no battery in it

Lithium cells in a pressurized oxygen-rich space are a known risk. The panel runs on USB power instead, and OxyRevo keeps the supply outside the shell with only cabling entering through a sealed porthole.

You switch it on from inside, so you are not opening the chamber mid-session.

Why it sits inside the chamber

Without it you are running two separate things. An hour in the chamber, then time under a panel somewhere else in the room.

Mounted inside, the light runs during an hour you have already committed to. For a clinic that is a scheduling argument as much as anything: same room, same hour, no second slot in the book.

Hyperbaric chambers warm up while they run. Compressing air raises its temperature, and a sealed shell has nowhere to dump that heat. In a hot room or a humid climate, an hour inside gets uncomfortable.

OxyRevo's own guidance is direct: if the chamber will sit in a room without air conditioning, buy this unit.

What happens if you skip it

Heat is the most common reason a session gets cut short. Someone books an hour and comes out at forty minutes because the shell has warmed up.

For a home user that is an annoyance. For a clinic charging per session it is a client who does not rebook, and the unit pays for itself over a summer.

Protection circuits

The unit shuts itself down on overcurrent, overheating, and overvoltage. A time-delay circuit stops it restarting the instant power returns after a flicker. Rapid restarts are what usually kill a compressor.

A BIBS, or built-in breathing system, is a sealed mask. It runs on two tubes. One brings fresh oxygen in, the other carries exhaled CO2 out of the chamber instead of back into it.

Sealed mask versus open mask

An open mask sits loosely on the face. Some of what you breathe is chamber air, so the concentration reaching you is lower than what the concentrator puts out.

A sealed mask does not mix. You get 90 to 98 percent, and what you breathe out leaves the chamber.

The trade-off is the seal itself. A mask clamped to your face for an hour does not suit everyone.

The problem the OmniBreath dial solves

Until now you picked one system before the session started and lived with it. Users who found the sealed mask claustrophobic gave up on it and lost the higher concentration.

OxyRevo built a custom switch. One dial, two positions, changed mid-session without disconnecting anything.

Start on the regular mask. If you want the higher concentration, turn the dial. If it stops being comfortable, turn it back.

Every OxyRevo chamber ships with a 10 LPM oxygen concentrator already built into the All-in-One unit. These two options replace that built-in concentrator with a larger one.

Nothing bolts on. Nothing sits on your floor. The upgrade happens inside the AIO unit before it ships.

No standalone concentrator to manage

Plenty of chambers on the market need a separate concentrator sitting beside them. That is another machine on your floor, another tubing run, and another thing to service.

OxyRevo builds theirs into the AIO unit. The upgrade is a bigger concentrator in the same box, not a second box.

How to read a flow rating

A flow rating is measured at normal room pressure, not inside a chamber at 2.0 ATA.

According to OxyRevo, a concentrator without a boosting system loses roughly half its flow once the chamber reaches full pressure. The pressurized chamber pushes back against the machine feeding it.

Ask any supplier what their flow is at full pressure. A cheaper unit rated at 20 LPM can deliver less at 2.0 ATA than a boosted unit rated lower.

A complete second AIO unit, identical to the one that ships with the chamber. OxyRevo added it to the range because clinics asked for it.

The reason is downtime. A clinic with one compressor and a fault has no chamber and a diary full of clients. A clinic with a spare swaps units and keeps running.

What is inside one AIO unit

That list is also worth reading if you are still comparing chambers. It is what OxyRevo puts in the standard unit, not an upgrade.

An hour in a chamber is a long time to stare at the ceiling. This kit is an adjustable TV bracket plus a Bluetooth speaker.

Both design choices are about what stays out of the chamber.

No mains power inside the shell

Some setups put the television inside the chamber. That puts AC power inside a pressurized oxygen-rich space.

OxyRevo mounts the screen outside and you view it through the porthole. No AC components go in.

No lithium battery inside the shell

The speaker runs on USB power with no rechargeable cell. Lithium batteries in an oxygen-rich environment are a known risk. Removing the battery removes the question.

A full-width table that replaces the standard folding table. It detaches when you do not want it there.

Why ABS and not metal

ABS is a rigid plastic. It is strong for its weight, which matters for something you lift in and out of a chamber by hand.

Buy it if you plan to work, read, or use a laptop during sessions. The standard folding table is fine for a phone and a drink.

A grounding mat that connects to the earth pin of a standard wall outlet.

It goes inside the chamber and connects out through the cable pass-through. The cheapest item on this list and the easiest one to add later.

A stainless steel frame that sits outside the chamber and gives you something solid to hold while getting in and out.

This frame is built for the Forward90 and does not fit other OxyRevo models. Call us before ordering if you are unsure which chamber you are configuring.