Space60 Pro Specifications

OxyRevo Space60 Pro Chamber Specifications

Published specifications for the OxyRevo Space60 Pro. Metric figures are OxyRevo published values, imperial figures are the published conversions. Noise, certification and service life are carried from the OxyRevo Space60 platform, which the Pro shares.
Specification Figure What it means for you
Dimensions and weight
Length 83 in (210 cm) Same on the Standard and the Mini builds.
Width, Standard build 38 in (96 cm) Widest point. Will not pass a 30 in or a 34 in doorway as built.
Width, Mini build About 30 in (75 cm) chamber body, 32 to 34 in (80 to 85 cm) at the widest point The side windows stick out past the shell, so plan the route on the wider figure.
Height, Mini build 60 in (153 cm) Add clearance above for the door hinge and for lifting the chair in.
Height, Standard build Not published by OxyRevo. Call 866-861-6317 and we will get it from the factory. Do not plan a low ceiling or a basement stair on the Mini figure.
Weight, Standard build 1,763 lbs (800 kg) Freight delivery on a lift gate. Check the floor rating on an upper storey.
Weight, Mini build Not published by OxyRevo. Call 866-861-6317 and we will get it from the factory. Expect the same delivery handling as the Standard until confirmed.
Occupant capacity 2 people The Space60 Pro is rated for two. One reclining chair ships as standard, so call us if two of you will use it at once.
Occupant height and weight limits Not published by OxyRevo. Call 866-861-6317 and we will get it from the factory. The 6 ft 5 in and 300 lb figure for the older Space60 is a single-user figure and does not carry over.
Materials and construction
Chamber material Stainless steel, welded from pieces of different thickness Rigid shell, no zippers, no fabric to inspect.
Reinforcement Aluminium ring at the metal to polycarbonate joint Holds the window seal square under repeated pressure cycles.
Window material Polycarbonate from Bayer, double-layered Two large windows, one each side, plus a clear front door.
Colour White standard. Silver, blue and black available. Custom colour and logo to order. Custom finishes are set at the factory, not changed later.
Pressure and oxygen
Working pressure 2.0 ATA maximum, adjustable from 1.1 ATA Covers a gentle first session and a full 2.0 ATA session in one chamber.
Pressure steps 1.1, 1.3, 1.5, 1.8 and 2.0 ATA. Custom levels available to order. Set from the touch screen rather than a dial.
Oxygen purity 95 to 97% Delivered by the 10 L concentrator in the all-in-one unit.
Timer 0 to 120 minutes, automatic Set the session length and the chamber counts it down.
Controls, safety and power
Control panels Intelligent touch screen inside and outside Solo operation, no second person needed at the outside panel.
Digital readouts Temperature, humidity and oxygen purity, on both screens You can check the air without opening the door.
Pressure gauges Inside and outside Analogue backup to the screens.
Deflate valves Inside and outside Either side can bring the pressure down.
Safety systems Power failure auto depressurize, smart door sensor with indicator lights, pressure relief valves, emergency valve The chamber will not pressurize with the door ajar and it bleeds down on its own if power drops.
Communication Phone handset and speaker inside and outside Talk to someone at pressure without ending the session.
Lighting LED reading light plus ambient lighting Enough to read by for a full session.
Mobility 4 solid wheels at the base Repositioning inside a room, not moving between rooms.
Compressor noise level Under 50 dB Quiet enough for a shared room. The compressor sits in the machine unit, not in the chamber.
Electrical requirements Not published by OxyRevo. Call 866-861-6317 and we will get it from the factory. Confirm the draw before you commit an outlet or a circuit.
Certification and rated service life
Certification CE (machinery, non-medical), ISO 13485 Certified as machinery, not as a medical device. Check with your own regulator if you need a medical classification.
Chamber capsule service life 10,000 hours At two hours a day, roughly 13 years of daily use.
Air compressor service life 10,000 hours Matches the capsule, so both reach end of life together.
Cooling unit service life 10,000 hours Same again.
Oxygen concentrator service life 5,000 hours Half the rest. Budget for this one first in a commercial room.
Swipe the table sideways

All-in-One Operating Unit

Air, oxygen and cooling live in one machine unit beside the chamber, joined by tubes and a power cable.

Components inside the OxyRevo Space60 Pro all-in-one operating unit, as published by OxyRevo
Component Detail
Air compressor 1 x oil free
Oxygen concentrator 1 x 10 L, 95 to 97% purity
Cooling and dehumidifying 2 x dehumidifier cooling machines, electrically driven
Air purification Anion generator, removes dust particles down to 2.5 microns
Sterilisation Air steriliser using water nano technology
Filtration PE sintered air filters
Humidity handling Water container
Unit dimensions and weight Not published by OxyRevo for the Space60 Pro unit. Call 866-861-6317 and we will get it from the factory.
Swipe the table sideways

Optional Upgrade Specifications

Published figures for the six OxyRevo Space60 Pro factory upgrades
Upgrade Published figures
Red light panel 660 nm red and 850 nm near infrared. DC 24 V supply, mains unit stays outside the chamber, shielded cabling through a sealed hyperbaric port. Panel length and wattage not published by OxyRevo for the Pro.
Water chiller air conditioner 110 V or 220 V input. Temperature range 14°F to 68°F (-10°C to 20°C). R134A refrigerant. Overcurrent, overvoltage, thermal and time-delay protection.
OmniBreath dual-logic BIBS mask Two positions. A for a standard oxygen mask, B for the built-in breathing system at 95 to 97% oxygen with carbon dioxide vented out. OxyRevo recommends pairing it with the 20 L concentrator.
20 L oxygen concentrator Adjustable 1 to 20 L per minute. 110 V or 220 V. Medical grade PE filter. Includes flow meter and water collector.
TV holder and Bluetooth speaker Aluminium holder for a 20 to 34 in screen, mounted outside the chamber. Xiaomi Bluetooth speaker inside on USB power, no battery in the chamber.
Multi-function power chair 12 V supply. Nappa leather. Adjustable seat angle, backrest and headrest. Forward and backward slide. Back massage. Three levels of seat ventilation and heating. Ambient LED. Removable.
Swipe the table sideways

What Ships With the Space60 Pro

  • Space60 Pro chamber, 1 unit
  • All-in-one operating unit, 1 unit
  • Reclining chair, 1
  • Standard headset oxygen mask, 1
  • Non-rebreather (NRB) oxygen mask, 1
  • Spare air filters
  • Spare fuses
  • Air and oxygen tubes
  • Power cable

Sold separately: all six factory upgrades. White glove delivery is a paid add-on, quoted separately from freight. No television, floor mat or levelling kit. One reclining chair ships even though the chamber is rated for two, so ask about seating before you order.

SPEC ROWS WE LEFT BLANK ON PURPOSE

Four figures are still open: height on the Standard build, occupant height and weight limits, Mini build weight, and the electrical draw. OxyRevo publishes no electrical figure on the older Space60 either. Call 866-861-6317 for what the factory has confirmed.