OxyRevo Space60 Pro Questions
Will the Space60 Pro fit through my door?
Probably not without checking first. The Space60 Pro Standard is 38 in wide, and the Pro Mini is about 32 to 34 in at its widest because the side windows stick out past the body. Neither clears a 30 in doorway. The original Space60 Mini at 29.5 in does. Call 866-861-6317 and we will confirm the route.
Can I run a Space60 Pro session on my own?
Yes. The Space60 Pro has a touch screen, pressure gauge and deflate valve inside as well as outside, so you set the pressure, watch the readouts and bring it down yourself. The handset lets you talk to someone without opening the door.
Can two people use the Space60 Pro at once?
The Space60 Pro is rated for two people, which is unusual in a sitting chamber. One reclining chair ships as standard, so settle seating for a second person before you order. OxyRevo has not published a combined weight limit or a maximum occupant height. Call 866-861-6317 and we will confirm both.
What happens if the power goes out while I am inside the Space60 Pro?
The Space60 Pro has a power failure system that bleeds pressure down slowly on its own, and the door drops open once the pressure is off. It works whether or not the person inside is awake. A manual deflate valve and an emergency valve give a faster way down.
Do I need the 20 L oxygen concentrator if I order the BIBS mask?
OxyRevo recommends it. The Space60 Pro ships with a 10 L concentrator, and the BIBS mask moves more oxygen than a standard one. OxyRevo states its boosting system on the 20 L unit holds flow at 2.0 ATA.
Can I add the red light panel or the water chiller to the Space60 Pro later?
Order them with the chamber. The red light panel runs shielded cabling through a sealed port cut at the factory, and OxyRevo has not published a retrofit route for the water chiller. The TV holder and power chair are less tied to the build, but decide on all six before production.
How is the Space60 Pro delivered and how much of it do I have to put together?
The Space60 Pro ships by freight as a made-to-order chamber, and lead times are confirmed at order rather than published. Setup is connecting the tubes and power cable between the machine unit and the chamber, so there is no plumbing and no crew. Standard freight drops the crate at the curb. White glove delivery is a paid add-on, quoted separately.
Weighing a hard shell against a soft one? Compare the range on our hyperbaric chambers page, or call 866-861-6317.
