866-861-6317
Ask an Expert





The Prism Light Pod is a commercial-grade full-body red light therapy bed built in Denver, Colorado. 17,000 medical-grade LEDs deliver 630nm, 660nm, and 850nm wavelengths in 15-minute sessions. FDA-registered Class 2 device with a 5-year warranty. Designed for wellness centers, chiropractic clinics, sports recovery facilities, gyms, and med spas adding red light therapy as a paid service line.
✓ Authorized Prism Light Pod Dealer. Full 5-year manufacturer warranty and Pro-Partner marketing program included.
The Light Pod is a full-body bed designed for one client at a time. 15-minute touchless sessions run unattended after a single button press. Six pre-programmed settings cover different objectives. The bed is built on an industrial steel frame with heavy-duty spring suspension, supports up to 400 lbs, and runs on a standard 110V outlet (a meaningful logistic advantage explained below).
Key specifications:
The Prism Light Pod is the commercial red light therapy bed we recommend for buyers running a facility-grade installation. The 110V power requirement is a meaningful differentiator for sites without dedicated 220V wiring, and the included Pro-Partner marketing program is unique in this category. Call 866-861-6317 to talk through facility fit, install requirements, and Pro-Partner onboarding.
RecovAthlete carries red light therapy across four tiers. The Light Pod is the top-tier commercial bed.
17,000 LEDs at 630nm, 660nm, and 850nm. 630nm and 660nm are red light wavelengths used for skin and surface tissue work. 850nm is near-infrared, used for deeper tissue penetration into muscle and joints. Running all three simultaneously means each session covers both surface and deep targets.
360-degree coverage. LEDs and reflective metal plating wrap the body. No need to reposition mid-session. This matters because client compliance with self-administered repositioning is poor; a touchless session removes that friction.
15-minute sessions, 6 pre-set programs. Fixed program time means predictable scheduling. Six programs means staff can position the bed for different client goals without retraining on advanced settings.
110V standard outlet, 17 amps peak. This is the most underrated commercial feature. Competing red light beds require 220V at 30 to 44 amps, which often means electrical work before install ($500 to $2,000 plus) and limits which rooms in your facility can host the Pod. The Light Pod plugs into a 20-amp dedicated breaker on standard 110V wiring. Less install friction. Lower ongoing electrical cost over the 15-year lifespan.
15-year LED lifespan (100,000 hours MTBF). At 50 sessions per week (15 min each), that exceeds 80 years of session time. For most facilities, the LEDs will outlast the rest of the equipment.
Built in Denver, Colorado. Domestic manufacturing matters for service turnaround. The 48-hour parts and labor commitment is realistic because parts ship from Denver, not overseas.
Honest assessment from an authorized dealer. We sell the Light Pod to commercial facilities and a small number of home buyers with dedicated recovery rooms.
Most commercial red light therapy beds require 220V dedicated wiring at 30 to 44 amps. The Prism Light Pod runs on a standard 110V outlet with a 20-amp dedicated breaker. Practical implications:
Every Prism Light Pod purchase includes the Pro-Partner program for commercial buyers. The program is run by Prism's CEO, a former Fortune 100 CMO with 40 years of marketing experience. Included support:
This is the only commercial red light therapy bed in our lineup that ships with included marketing onboarding. For operators new to selling wellness services, it removes most of the launch friction.
| Specification | Detail |
|---|---|
| LED count | 17,000 medical-grade LEDs |
| Wavelengths | 630nm + 660nm (red) + 850nm (near-infrared) |
| Coverage | 360-degree full body |
| Session length | 15 minutes (six pre-set programs) |
| Operation | One-button touchless |
| Power | 110V US/Canada, supports 220V international. 17 amps peak. 20-amp dedicated breaker. |
| Dimensions (opened) | 92 inch L by 44.5 inch W by 48 inch H |
| Room size required | 9 by 9 ft or 8 by 10 ft minimum |
| Ventilation | Standard HVAC or partial wall ventilation |
| Frame | Industrial-grade steel, heavy-duty spring suspension |
| Unit weight | 320 lbs |
| Max client weight | 400 lbs |
| LED lifespan | 15 years / 100,000 hours MTBF |
| EMF emissions | Zero |
| Testing | 120-hour burn-in per unit |
| FDA status | Class 2 Registered Medical Device |
| Manufacturing | Built in Denver, Colorado, USA |
| Warranty | 5 years comprehensive |
| Service | 48-hour parts and labor |
| Support | 8 by 5 hotline and text |
Commercial financing: Available through approved lending partners. Call 866-861-6317 for terms.
About the Light Pod
Specs and Use
Buying and Warranty
The Prism Light Pod is a commercial-grade full-body red light therapy bed built in Denver, Colorado. 17,000 medical-grade LEDs deliver 630nm, 660nm, and 850nm wavelengths in 15-minute sessions. FDA-registered Class 2 device with a 5-year warranty. Designed for wellness centers, chiropractic clinics, sports recovery facilities, gyms, and med spas adding red light therapy as a paid service line.
✓ Authorized Prism Light Pod Dealer. Full 5-year manufacturer warranty and Pro-Partner marketing program included.
The Light Pod is a full-body bed designed for one client at a time. 15-minute touchless sessions run unattended after a single button press. Six pre-programmed settings cover different objectives. The bed is built on an industrial steel frame with heavy-duty spring suspension, supports up to 400 lbs, and runs on a standard 110V outlet (a meaningful logistic advantage explained below).
Key specifications:
The Prism Light Pod is the commercial red light therapy bed we recommend for buyers running a facility-grade installation. The 110V power requirement is a meaningful differentiator for sites without dedicated 220V wiring, and the included Pro-Partner marketing program is unique in this category. Call 866-861-6317 to talk through facility fit, install requirements, and Pro-Partner onboarding.
RecovAthlete carries red light therapy across four tiers. The Light Pod is the top-tier commercial bed.
17,000 LEDs at 630nm, 660nm, and 850nm. 630nm and 660nm are red light wavelengths used for skin and surface tissue work. 850nm is near-infrared, used for deeper tissue penetration into muscle and joints. Running all three simultaneously means each session covers both surface and deep targets.
360-degree coverage. LEDs and reflective metal plating wrap the body. No need to reposition mid-session. This matters because client compliance with self-administered repositioning is poor; a touchless session removes that friction.
15-minute sessions, 6 pre-set programs. Fixed program time means predictable scheduling. Six programs means staff can position the bed for different client goals without retraining on advanced settings.
110V standard outlet, 17 amps peak. This is the most underrated commercial feature. Competing red light beds require 220V at 30 to 44 amps, which often means electrical work before install ($500 to $2,000 plus) and limits which rooms in your facility can host the Pod. The Light Pod plugs into a 20-amp dedicated breaker on standard 110V wiring. Less install friction. Lower ongoing electrical cost over the 15-year lifespan.
15-year LED lifespan (100,000 hours MTBF). At 50 sessions per week (15 min each), that exceeds 80 years of session time. For most facilities, the LEDs will outlast the rest of the equipment.
Built in Denver, Colorado. Domestic manufacturing matters for service turnaround. The 48-hour parts and labor commitment is realistic because parts ship from Denver, not overseas.
Honest assessment from an authorized dealer. We sell the Light Pod to commercial facilities and a small number of home buyers with dedicated recovery rooms.
Most commercial red light therapy beds require 220V dedicated wiring at 30 to 44 amps. The Prism Light Pod runs on a standard 110V outlet with a 20-amp dedicated breaker. Practical implications:
Every Prism Light Pod purchase includes the Pro-Partner program for commercial buyers. The program is run by Prism's CEO, a former Fortune 100 CMO with 40 years of marketing experience. Included support:
This is the only commercial red light therapy bed in our lineup that ships with included marketing onboarding. For operators new to selling wellness services, it removes most of the launch friction.
| Specification | Detail |
|---|---|
| LED count | 17,000 medical-grade LEDs |
| Wavelengths | 630nm + 660nm (red) + 850nm (near-infrared) |
| Coverage | 360-degree full body |
| Session length | 15 minutes (six pre-set programs) |
| Operation | One-button touchless |
| Power | 110V US/Canada, supports 220V international. 17 amps peak. 20-amp dedicated breaker. |
| Dimensions (opened) | 92 inch L by 44.5 inch W by 48 inch H |
| Room size required | 9 by 9 ft or 8 by 10 ft minimum |
| Ventilation | Standard HVAC or partial wall ventilation |
| Frame | Industrial-grade steel, heavy-duty spring suspension |
| Unit weight | 320 lbs |
| Max client weight | 400 lbs |
| LED lifespan | 15 years / 100,000 hours MTBF |
| EMF emissions | Zero |
| Testing | 120-hour burn-in per unit |
| FDA status | Class 2 Registered Medical Device |
| Manufacturing | Built in Denver, Colorado, USA |
| Warranty | 5 years comprehensive |
| Service | 48-hour parts and labor |
| Support | 8 by 5 hotline and text |
Commercial financing: Available through approved lending partners. Call 866-861-6317 for terms.
About the Light Pod
Specs and Use
Buying and Warranty
At RecovAthlete, we’re here to support your recovery and performance goals—without overpaying. Our 120% Price Match Guarantee makes sure you always get the best deal. If you find a lower price, not only will we match it, we’ll beat it by adding 20% of the price difference back to your refund.
We don’t undercut manufacturers or sell below cost. We follow ethical pricing standards prioritizing fairness, brand integrity, and long-term trust.
With our 120% Price Match Guarantee, you can shop knowing you’ll never miss out on a better deal—because we’ll beat it.
The Prism Light Pod is a commercial-grade full-body red light therapy bed built in Denver, Colorado. 17,000 medical-grade LEDs deliver 630nm, 660nm, and 850nm wavelengths in 15-minute sessions. FDA-registered Class 2 device with a 5-year warranty. Designed for wellness centers, chiropractic clinics, sports recovery facilities, gyms, and med spas adding red light therapy as a paid service line.
✓ Authorized Prism Light Pod Dealer. Full 5-year manufacturer warranty and Pro-Partner marketing program included.
The Light Pod is a full-body bed designed for one client at a time. 15-minute touchless sessions run unattended after a single button press. Six pre-programmed settings cover different objectives. The bed is built on an industrial steel frame with heavy-duty spring suspension, supports up to 400 lbs, and runs on a standard 110V outlet (a meaningful logistic advantage explained below).
Key specifications:
The Prism Light Pod is the commercial red light therapy bed we recommend for buyers running a facility-grade installation. The 110V power requirement is a meaningful differentiator for sites without dedicated 220V wiring, and the included Pro-Partner marketing program is unique in this category. Call 866-861-6317 to talk through facility fit, install requirements, and Pro-Partner onboarding.
RecovAthlete carries red light therapy across four tiers. The Light Pod is the top-tier commercial bed.
17,000 LEDs at 630nm, 660nm, and 850nm. 630nm and 660nm are red light wavelengths used for skin and surface tissue work. 850nm is near-infrared, used for deeper tissue penetration into muscle and joints. Running all three simultaneously means each session covers both surface and deep targets.
360-degree coverage. LEDs and reflective metal plating wrap the body. No need to reposition mid-session. This matters because client compliance with self-administered repositioning is poor; a touchless session removes that friction.
15-minute sessions, 6 pre-set programs. Fixed program time means predictable scheduling. Six programs means staff can position the bed for different client goals without retraining on advanced settings.
110V standard outlet, 17 amps peak. This is the most underrated commercial feature. Competing red light beds require 220V at 30 to 44 amps, which often means electrical work before install ($500 to $2,000 plus) and limits which rooms in your facility can host the Pod. The Light Pod plugs into a 20-amp dedicated breaker on standard 110V wiring. Less install friction. Lower ongoing electrical cost over the 15-year lifespan.
15-year LED lifespan (100,000 hours MTBF). At 50 sessions per week (15 min each), that exceeds 80 years of session time. For most facilities, the LEDs will outlast the rest of the equipment.
Built in Denver, Colorado. Domestic manufacturing matters for service turnaround. The 48-hour parts and labor commitment is realistic because parts ship from Denver, not overseas.
Honest assessment from an authorized dealer. We sell the Light Pod to commercial facilities and a small number of home buyers with dedicated recovery rooms.
Most commercial red light therapy beds require 220V dedicated wiring at 30 to 44 amps. The Prism Light Pod runs on a standard 110V outlet with a 20-amp dedicated breaker. Practical implications:
Every Prism Light Pod purchase includes the Pro-Partner program for commercial buyers. The program is run by Prism's CEO, a former Fortune 100 CMO with 40 years of marketing experience. Included support:
This is the only commercial red light therapy bed in our lineup that ships with included marketing onboarding. For operators new to selling wellness services, it removes most of the launch friction.
| Specification | Detail |
|---|---|
| LED count | 17,000 medical-grade LEDs |
| Wavelengths | 630nm + 660nm (red) + 850nm (near-infrared) |
| Coverage | 360-degree full body |
| Session length | 15 minutes (six pre-set programs) |
| Operation | One-button touchless |
| Power | 110V US/Canada, supports 220V international. 17 amps peak. 20-amp dedicated breaker. |
| Dimensions (opened) | 92 inch L by 44.5 inch W by 48 inch H |
| Room size required | 9 by 9 ft or 8 by 10 ft minimum |
| Ventilation | Standard HVAC or partial wall ventilation |
| Frame | Industrial-grade steel, heavy-duty spring suspension |
| Unit weight | 320 lbs |
| Max client weight | 400 lbs |
| LED lifespan | 15 years / 100,000 hours MTBF |
| EMF emissions | Zero |
| Testing | 120-hour burn-in per unit |
| FDA status | Class 2 Registered Medical Device |
| Manufacturing | Built in Denver, Colorado, USA |
| Warranty | 5 years comprehensive |
| Service | 48-hour parts and labor |
| Support | 8 by 5 hotline and text |
Commercial financing: Available through approved lending partners. Call 866-861-6317 for terms.
About the Light Pod
Specs and Use
Buying and Warranty
BASI Systems Pilates equipment is crafted with professionalism to ensure your complete satisfaction. We are committed to resolving any unlikely issues that may arise and are always here to support you.
We provide a limited warranty, which is our sole warranty, overriding all other warranties, whether expressed or implied. This warranty activates on the original purchase invoice date and adheres to the time limits specified herein. Repaired or replaced parts under this warranty will maintain the original warranty period.
We assure our products will be free from material or workmanship defects during the warranty period. In case of a defect believed to be covered by this warranty, follow the proper return procedure. Defective parts conforming to warranty guidelines will be repaired, replaced, or refunded at BASI Systems' discretion, under these conditions:
Includes frame and structural components for barrels (Ladder Barrel, Spine Corrector), chairs (Wunda Chair, F2 Chair), wall system products (Wall Unit, Wall Tower, Ped-A-Pul), and Reformer gearbar and footbar mechanisms.
Covers springs and mechanical components.
Applicable to upholstered parts, ropes, straps, and loops. Excludes wear-and-tear, stains, indentations, scratches, or damage from harsh chemical cleansers. Equivalent fabric will be provided if identical fabric is unavailable.
This is our exclusive warranty, voiding all other warranties, expressed or implied. BASI Systems is not liable for incidental, consequential, or punitive damages.
This limited warranty provides specific legal rights, and you may have other rights varying from state to state.
Our responsibility for defective goods is limited to repair, replacement, or refund as detailed in this limited warranty.
To the extent permitted by law, this warranty is exclusive and replaces all other warranties, oral, written, statutory, express, or implied. We disclaim all other warranties, expressed or implied, including but not limited to, merchantability and fitness for a particular purpose. Disclaimers may not apply in states disallowing implied warranty disclaimers.
Where legally mandated, we limit the duration and remedies of implied warranties to the duration of this express limited warranty.
This warranty extends only to the original consumer purchaser and does not cover subsequent owners or transferees.
This warranty is effective from the original purchase invoice date and covers the periods specified. We may modify warranty availability, but not retroactively.
Warranty coverage is conditional on compliance with terms, including following return procedures and warranty guidelines.
This warranty does not cover damage due to transportation, storage, improper use, failure to follow instructions, preventive maintenance neglect, modifications, unauthorized repair, normal wear and tear, or external factors like accidents or other uncontrollable events.
The Prism Light Pod is a commercial-grade full-body red light therapy bed built in Denver, Colorado. 17,000 medical-grade LEDs deliver 630nm, 660nm, and 850nm wavelengths in 15-minute sessions. FDA-registered Class 2 device with a 5-year warranty. Designed for wellness centers, chiropractic clinics, sports recovery facilities, gyms, and med spas adding red light therapy as a paid service line.
✓ Authorized Prism Light Pod Dealer. Full 5-year manufacturer warranty and Pro-Partner marketing program included.
The Light Pod is a full-body bed designed for one client at a time. 15-minute touchless sessions run unattended after a single button press. Six pre-programmed settings cover different objectives. The bed is built on an industrial steel frame with heavy-duty spring suspension, supports up to 400 lbs, and runs on a standard 110V outlet (a meaningful logistic advantage explained below).
Key specifications:
The Prism Light Pod is the commercial red light therapy bed we recommend for buyers running a facility-grade installation. The 110V power requirement is a meaningful differentiator for sites without dedicated 220V wiring, and the included Pro-Partner marketing program is unique in this category. Call 866-861-6317 to talk through facility fit, install requirements, and Pro-Partner onboarding.
RecovAthlete carries red light therapy across four tiers. The Light Pod is the top-tier commercial bed.
17,000 LEDs at 630nm, 660nm, and 850nm. 630nm and 660nm are red light wavelengths used for skin and surface tissue work. 850nm is near-infrared, used for deeper tissue penetration into muscle and joints. Running all three simultaneously means each session covers both surface and deep targets.
360-degree coverage. LEDs and reflective metal plating wrap the body. No need to reposition mid-session. This matters because client compliance with self-administered repositioning is poor; a touchless session removes that friction.
15-minute sessions, 6 pre-set programs. Fixed program time means predictable scheduling. Six programs means staff can position the bed for different client goals without retraining on advanced settings.
110V standard outlet, 17 amps peak. This is the most underrated commercial feature. Competing red light beds require 220V at 30 to 44 amps, which often means electrical work before install ($500 to $2,000 plus) and limits which rooms in your facility can host the Pod. The Light Pod plugs into a 20-amp dedicated breaker on standard 110V wiring. Less install friction. Lower ongoing electrical cost over the 15-year lifespan.
15-year LED lifespan (100,000 hours MTBF). At 50 sessions per week (15 min each), that exceeds 80 years of session time. For most facilities, the LEDs will outlast the rest of the equipment.
Built in Denver, Colorado. Domestic manufacturing matters for service turnaround. The 48-hour parts and labor commitment is realistic because parts ship from Denver, not overseas.
Honest assessment from an authorized dealer. We sell the Light Pod to commercial facilities and a small number of home buyers with dedicated recovery rooms.
Most commercial red light therapy beds require 220V dedicated wiring at 30 to 44 amps. The Prism Light Pod runs on a standard 110V outlet with a 20-amp dedicated breaker. Practical implications:
Every Prism Light Pod purchase includes the Pro-Partner program for commercial buyers. The program is run by Prism's CEO, a former Fortune 100 CMO with 40 years of marketing experience. Included support:
This is the only commercial red light therapy bed in our lineup that ships with included marketing onboarding. For operators new to selling wellness services, it removes most of the launch friction.
| Specification | Detail |
|---|---|
| LED count | 17,000 medical-grade LEDs |
| Wavelengths | 630nm + 660nm (red) + 850nm (near-infrared) |
| Coverage | 360-degree full body |
| Session length | 15 minutes (six pre-set programs) |
| Operation | One-button touchless |
| Power | 110V US/Canada, supports 220V international. 17 amps peak. 20-amp dedicated breaker. |
| Dimensions (opened) | 92 inch L by 44.5 inch W by 48 inch H |
| Room size required | 9 by 9 ft or 8 by 10 ft minimum |
| Ventilation | Standard HVAC or partial wall ventilation |
| Frame | Industrial-grade steel, heavy-duty spring suspension |
| Unit weight | 320 lbs |
| Max client weight | 400 lbs |
| LED lifespan | 15 years / 100,000 hours MTBF |
| EMF emissions | Zero |
| Testing | 120-hour burn-in per unit |
| FDA status | Class 2 Registered Medical Device |
| Manufacturing | Built in Denver, Colorado, USA |
| Warranty | 5 years comprehensive |
| Service | 48-hour parts and labor |
| Support | 8 by 5 hotline and text |
Commercial financing: Available through approved lending partners. Call 866-861-6317 for terms.
About the Light Pod
Specs and Use
Buying and Warranty
Our Shipping & Returns Policy applies to all products and orders on our website. It aims to protect our customers and our business, ensuring a convenient buying experience. We encourage you to read and familiarize yourself with all our policies.
By placing an order on our website, you confirm that you have read, understood, and agreed to our Shipping & Returns Policy, Terms of Service, and Privacy Policy.
Ensure the item(s) can fit the intended space and can be moved through doors, corridors, and staircases in its packaging. Returns due to sizing issues are the customer’s responsibility (applicable only for returnable products).
Please find our detailed returns policies here
Installation and Color Disclaimers
Legal and Miscellaneous Notes
Note: Our return policies are influenced by the brands' own policies. Details on exceptions are listed on product pages. In all return cases, RecoAthlete reserves the right to inspect returned products and adjust credits based on the condition of the returned items.
For detailed information on our Shipping & Returns policies, please refer to our FAQ page. If you wish to initiate a return or have questions, please contact us at info@recovathlete.com.
The Prism Light Pod is a commercial-grade full-body red light therapy bed built in Denver, Colorado. 17,000 medical-grade LEDs deliver 630nm, 660nm, and 850nm wavelengths in 15-minute sessions. FDA-registered Class 2 device with a 5-year warranty. Designed for wellness centers, chiropractic clinics, sports recovery facilities, gyms, and med spas adding red light therapy as a paid service line.
✓ Authorized Prism Light Pod Dealer. Full 5-year manufacturer warranty and Pro-Partner marketing program included.
The Light Pod is a full-body bed designed for one client at a time. 15-minute touchless sessions run unattended after a single button press. Six pre-programmed settings cover different objectives. The bed is built on an industrial steel frame with heavy-duty spring suspension, supports up to 400 lbs, and runs on a standard 110V outlet (a meaningful logistic advantage explained below).
Key specifications:
The Prism Light Pod is the commercial red light therapy bed we recommend for buyers running a facility-grade installation. The 110V power requirement is a meaningful differentiator for sites without dedicated 220V wiring, and the included Pro-Partner marketing program is unique in this category. Call 866-861-6317 to talk through facility fit, install requirements, and Pro-Partner onboarding.
RecovAthlete carries red light therapy across four tiers. The Light Pod is the top-tier commercial bed.
17,000 LEDs at 630nm, 660nm, and 850nm. 630nm and 660nm are red light wavelengths used for skin and surface tissue work. 850nm is near-infrared, used for deeper tissue penetration into muscle and joints. Running all three simultaneously means each session covers both surface and deep targets.
360-degree coverage. LEDs and reflective metal plating wrap the body. No need to reposition mid-session. This matters because client compliance with self-administered repositioning is poor; a touchless session removes that friction.
15-minute sessions, 6 pre-set programs. Fixed program time means predictable scheduling. Six programs means staff can position the bed for different client goals without retraining on advanced settings.
110V standard outlet, 17 amps peak. This is the most underrated commercial feature. Competing red light beds require 220V at 30 to 44 amps, which often means electrical work before install ($500 to $2,000 plus) and limits which rooms in your facility can host the Pod. The Light Pod plugs into a 20-amp dedicated breaker on standard 110V wiring. Less install friction. Lower ongoing electrical cost over the 15-year lifespan.
15-year LED lifespan (100,000 hours MTBF). At 50 sessions per week (15 min each), that exceeds 80 years of session time. For most facilities, the LEDs will outlast the rest of the equipment.
Built in Denver, Colorado. Domestic manufacturing matters for service turnaround. The 48-hour parts and labor commitment is realistic because parts ship from Denver, not overseas.
Honest assessment from an authorized dealer. We sell the Light Pod to commercial facilities and a small number of home buyers with dedicated recovery rooms.
Most commercial red light therapy beds require 220V dedicated wiring at 30 to 44 amps. The Prism Light Pod runs on a standard 110V outlet with a 20-amp dedicated breaker. Practical implications:
Every Prism Light Pod purchase includes the Pro-Partner program for commercial buyers. The program is run by Prism's CEO, a former Fortune 100 CMO with 40 years of marketing experience. Included support:
This is the only commercial red light therapy bed in our lineup that ships with included marketing onboarding. For operators new to selling wellness services, it removes most of the launch friction.
| Specification | Detail |
|---|---|
| LED count | 17,000 medical-grade LEDs |
| Wavelengths | 630nm + 660nm (red) + 850nm (near-infrared) |
| Coverage | 360-degree full body |
| Session length | 15 minutes (six pre-set programs) |
| Operation | One-button touchless |
| Power | 110V US/Canada, supports 220V international. 17 amps peak. 20-amp dedicated breaker. |
| Dimensions (opened) | 92 inch L by 44.5 inch W by 48 inch H |
| Room size required | 9 by 9 ft or 8 by 10 ft minimum |
| Ventilation | Standard HVAC or partial wall ventilation |
| Frame | Industrial-grade steel, heavy-duty spring suspension |
| Unit weight | 320 lbs |
| Max client weight | 400 lbs |
| LED lifespan | 15 years / 100,000 hours MTBF |
| EMF emissions | Zero |
| Testing | 120-hour burn-in per unit |
| FDA status | Class 2 Registered Medical Device |
| Manufacturing | Built in Denver, Colorado, USA |
| Warranty | 5 years comprehensive |
| Service | 48-hour parts and labor |
| Support | 8 by 5 hotline and text |
Commercial financing: Available through approved lending partners. Call 866-861-6317 for terms.
About the Light Pod
Specs and Use
Buying and Warranty
The Prism Light Pod is a commercial-grade full-body red light therapy bed built in Denver, Colorado. 17,000 medical-grade LEDs deliver 630nm, 660nm, and 850nm wavelengths in 15-minute sessions. FDA-registered Class 2 device with a 5-year warranty. Designed for wellness centers, chiropractic clinics, sports recovery facilities, gyms, and med spas adding red light therapy as a paid service line.
✓ Authorized Prism Light Pod Dealer. Full 5-year manufacturer warranty and Pro-Partner marketing program included.
The Light Pod is a full-body bed designed for one client at a time. 15-minute touchless sessions run unattended after a single button press. Six pre-programmed settings cover different objectives. The bed is built on an industrial steel frame with heavy-duty spring suspension, supports up to 400 lbs, and runs on a standard 110V outlet (a meaningful logistic advantage explained below).
Key specifications:
The Prism Light Pod is the commercial red light therapy bed we recommend for buyers running a facility-grade installation. The 110V power requirement is a meaningful differentiator for sites without dedicated 220V wiring, and the included Pro-Partner marketing program is unique in this category. Call 866-861-6317 to talk through facility fit, install requirements, and Pro-Partner onboarding.
RecovAthlete carries red light therapy across four tiers. The Light Pod is the top-tier commercial bed.
17,000 LEDs at 630nm, 660nm, and 850nm. 630nm and 660nm are red light wavelengths used for skin and surface tissue work. 850nm is near-infrared, used for deeper tissue penetration into muscle and joints. Running all three simultaneously means each session covers both surface and deep targets.
360-degree coverage. LEDs and reflective metal plating wrap the body. No need to reposition mid-session. This matters because client compliance with self-administered repositioning is poor; a touchless session removes that friction.
15-minute sessions, 6 pre-set programs. Fixed program time means predictable scheduling. Six programs means staff can position the bed for different client goals without retraining on advanced settings.
110V standard outlet, 17 amps peak. This is the most underrated commercial feature. Competing red light beds require 220V at 30 to 44 amps, which often means electrical work before install ($500 to $2,000 plus) and limits which rooms in your facility can host the Pod. The Light Pod plugs into a 20-amp dedicated breaker on standard 110V wiring. Less install friction. Lower ongoing electrical cost over the 15-year lifespan.
15-year LED lifespan (100,000 hours MTBF). At 50 sessions per week (15 min each), that exceeds 80 years of session time. For most facilities, the LEDs will outlast the rest of the equipment.
Built in Denver, Colorado. Domestic manufacturing matters for service turnaround. The 48-hour parts and labor commitment is realistic because parts ship from Denver, not overseas.
Honest assessment from an authorized dealer. We sell the Light Pod to commercial facilities and a small number of home buyers with dedicated recovery rooms.
Most commercial red light therapy beds require 220V dedicated wiring at 30 to 44 amps. The Prism Light Pod runs on a standard 110V outlet with a 20-amp dedicated breaker. Practical implications:
Every Prism Light Pod purchase includes the Pro-Partner program for commercial buyers. The program is run by Prism's CEO, a former Fortune 100 CMO with 40 years of marketing experience. Included support:
This is the only commercial red light therapy bed in our lineup that ships with included marketing onboarding. For operators new to selling wellness services, it removes most of the launch friction.
| Specification | Detail |
|---|---|
| LED count | 17,000 medical-grade LEDs |
| Wavelengths | 630nm + 660nm (red) + 850nm (near-infrared) |
| Coverage | 360-degree full body |
| Session length | 15 minutes (six pre-set programs) |
| Operation | One-button touchless |
| Power | 110V US/Canada, supports 220V international. 17 amps peak. 20-amp dedicated breaker. |
| Dimensions (opened) | 92 inch L by 44.5 inch W by 48 inch H |
| Room size required | 9 by 9 ft or 8 by 10 ft minimum |
| Ventilation | Standard HVAC or partial wall ventilation |
| Frame | Industrial-grade steel, heavy-duty spring suspension |
| Unit weight | 320 lbs |
| Max client weight | 400 lbs |
| LED lifespan | 15 years / 100,000 hours MTBF |
| EMF emissions | Zero |
| Testing | 120-hour burn-in per unit |
| FDA status | Class 2 Registered Medical Device |
| Manufacturing | Built in Denver, Colorado, USA |
| Warranty | 5 years comprehensive |
| Service | 48-hour parts and labor |
| Support | 8 by 5 hotline and text |
Commercial financing: Available through approved lending partners. Call 866-861-6317 for terms.
About the Light Pod
Specs and Use
Buying and Warranty














