866-861-6317
Ask an Expert





Shipping Free
7
✔ Authorized Canadian Spa Company retailer. RecovAthlete ships and supports the full lineup across the US.
The Canadian Spa St. Lawrence 16ft Swim Spa (KS-10028) is built around one idea: give serious swimmers a current worth training against. The patented Swim Lane System uses three resistance jets plus two profile-aligning jets in a W-stream layout. The profile jets keep you centered so you're swimming in a straight line instead of drifting into the wall.
Dual-zone temperature control: swim at 80°F while others soak at 104°F at the same time. No pre-heating. No choosing between workout and recovery. 72 adjustable hydrotherapy jets across a 15-person capacity. Aristech Lucite® acrylic shell with fiberglass reinforcement. Built for daily year-round training in sub-zero climates.
The common failure mode of budget swim spas is single-jet current. One jet fires water at you. You drift sideways. You spend the session fighting to stay in the lane instead of swimming. The workout stops being a workout.
The St. Lawrence 16ft uses a three-jet resistance system plus two profile-aligning jets arranged in a W-stream. The resistance jets produce the current. The profile jets run along your sides to keep your body centered. You swim in a straight line, forward, stroke after stroke.
At competitive pace, the current is strong enough that you can't outrun it. You swim in place. That's the test of a training-grade swim spa: can you hold your position against the current long enough to finish a real set?
In a single-zone swim spa, one temperature rules the whole tub. Swimmers want 78°F to 82°F. Soakers want 102°F to 104°F. Whoever uses the unit first sets the temperature. Everyone else waits for it to shift, which takes hours.
The 16ft uses two independent heating systems. Swim zone runs at your training temperature. Hydrotherapy zone runs at your recovery temperature. Same unit, same time, different water. This is the feature most buyers wish they'd specified when they ordered their first swim spa.
Practical use: partner swims before dinner while you soak post-work. Kids swim while adults soak after. Post-swim transition from 80°F lane to 104°F hydrotherapy for cold-to-warm recovery protocol.
Aristech Lucite® acrylic shell with fiberglass reinforcement and Vinyl Ester Resin. This is commercial-pool-grade construction. The shell won't crack, warp, or fade in freeze-thaw cycles. Most outdoor pools in cold climates crack within a decade; this construction is the reason the St. Lawrence doesn't.
7-layer blackout insulation with closed-cell foam wraps the full unit. Heat retention blanket across the top. In sub-zero operation, the heaters cycle infrequently because the insulation holds what they produce. Operating cost stays in a livable range.
Buyers in Minnesota, upstate New York, northern Michigan, and Colorado run this unit year-round. Your electricity rate determines your monthly cost, but the insulation spec removes the "unusable in winter" problem that kills cheaper swim spas.
| Specification | What it means for you |
|---|---|
| Swim Lane System (W-stream) | Three resistance jets plus two profile-aligning jets. The profile jets keep you centered so you swim in a straight line. This is the mechanical difference between a training swim spa and an expensive water feature. |
| Dual-zone independent heating | Swim zone at 80°F while hydrotherapy zone runs 104°F at the same time. Ends the temperature compromise between swimmers and soakers. |
| 10-ft flat swim lane | No steps, benches, or obstacles in the lane. Full-body stroke work uninterrupted. |
| 72 adjustable jets | Highest jet count in the swim spa lineup. Hydrotherapy zone delivers real targeted therapy across 15-person capacity. |
| Aristech Lucite® acrylic shell | Commercial-pool-grade shell material with fiberglass and Vinyl Ester Resin. Decades of freeze-thaw, UV, and heavy-use durability. |
| 200 sq.ft Glacier filtration + ozone | Handles the volume of a 15-person swim spa. Optional AO₃P UV upgrade cuts chemical use 80%. |
Questions about accessories or upgrades? Call 866-861-6317 before ordering.
| Model | St. Lawrence 16ft Swim Spa (KS-10028) |
| Length | 16 feet |
| Seating | 15 persons |
| Total jets | 72 adjustable hydrotherapy jets |
| Swim system | Swim Lane (3 resistance + 2 profile-aligning jets in W-stream) |
| Swim lane | 10-ft flat lane, no steps or benches |
| Zone config | Dual-zone (independent temperature control) |
| Filtration | 200 sq.ft Glacier antimicrobial system + ozone generator |
| Optional upgrade | Glacier AO₃P UV, cuts chemical use by up to 80% |
| Waterfalls | 2 cascading |
| Audio | Pop-up Bluetooth speakers |
| Lighting | Perimeter multi-color LED |
| Aromatherapy | Built-in aromatherapy chamber |
| SKU | KS-10028 |
| Feature | St. Lawrence 13ft | St. Lawrence 16ft ★ | St. Lawrence 20ft |
|---|---|---|---|
| Price | $34,999 | $41,999 | $48,999 |
| Length | 13 ft | 16 ft | 20 ft |
| Capacity | 12 | 15 | 17 |
| Jets | 39 | 72 | 73 |
| Swim pumps | 3 × 5HP | 3 + 2 profile | 5 pumps / 3 river jets |
| Zone config | Single | Dual-zone | Dual-zone |
| Best for | Smaller yards | Serious swimmers | Training + family |
A backyard pool plus a separate hot tub typically runs 80 to 140 thousand installed in cold climates, plus permitting, concrete, enclosure, and ongoing chemistry for two systems. A swim spa collapses both into one unit with lower total install cost, lower operating cost, and year-round use instead of a 4-month outdoor pool season.
Financing is available through multiple partners. Most swim spa buyers structure payments over 60 to 84 months. Call 866-861-6317 before ordering to discuss monthly structures.
We confirm your order and call within 1 business day to verify address, delivery access, and electrical readiness. If anything's unclear, we flag it now, not on delivery day.
Lead time typically 3 to 6 weeks. You receive tracking and a confirmed delivery window.
Crane placement to your prepared concrete pad in most cases. Have the 240V-50A dedicated circuit wired and ready before delivery day.
We walk through water chemistry, filter startup, and temperature calibration. Call 866-861-6317 with any questions after your first fill.
Freight carrier with liftgate delivery to the contiguous US. Final positioning to pad, deck, or patio is your installer's job or a 2-to-4-person moving crew.
Electrical: 240V-50A dedicated circuit required, installed by a licensed electrician before delivery. Concrete pad rated for filled weight. Crane placement is typical for site access.
Call 866-861-6317 before ordering to confirm delivery logistics, site access, and structural support for your address.
✔ Authorized Canadian Spa Company retailer. RecovAthlete ships and supports the full lineup across the US.
The Canadian Spa St. Lawrence 16ft Swim Spa (KS-10028) is built around one idea: give serious swimmers a current worth training against. The patented Swim Lane System uses three resistance jets plus two profile-aligning jets in a W-stream layout. The profile jets keep you centered so you're swimming in a straight line instead of drifting into the wall.
Dual-zone temperature control: swim at 80°F while others soak at 104°F at the same time. No pre-heating. No choosing between workout and recovery. 72 adjustable hydrotherapy jets across a 15-person capacity. Aristech Lucite® acrylic shell with fiberglass reinforcement. Built for daily year-round training in sub-zero climates.
The common failure mode of budget swim spas is single-jet current. One jet fires water at you. You drift sideways. You spend the session fighting to stay in the lane instead of swimming. The workout stops being a workout.
The St. Lawrence 16ft uses a three-jet resistance system plus two profile-aligning jets arranged in a W-stream. The resistance jets produce the current. The profile jets run along your sides to keep your body centered. You swim in a straight line, forward, stroke after stroke.
At competitive pace, the current is strong enough that you can't outrun it. You swim in place. That's the test of a training-grade swim spa: can you hold your position against the current long enough to finish a real set?
In a single-zone swim spa, one temperature rules the whole tub. Swimmers want 78°F to 82°F. Soakers want 102°F to 104°F. Whoever uses the unit first sets the temperature. Everyone else waits for it to shift, which takes hours.
The 16ft uses two independent heating systems. Swim zone runs at your training temperature. Hydrotherapy zone runs at your recovery temperature. Same unit, same time, different water. This is the feature most buyers wish they'd specified when they ordered their first swim spa.
Practical use: partner swims before dinner while you soak post-work. Kids swim while adults soak after. Post-swim transition from 80°F lane to 104°F hydrotherapy for cold-to-warm recovery protocol.
Aristech Lucite® acrylic shell with fiberglass reinforcement and Vinyl Ester Resin. This is commercial-pool-grade construction. The shell won't crack, warp, or fade in freeze-thaw cycles. Most outdoor pools in cold climates crack within a decade; this construction is the reason the St. Lawrence doesn't.
7-layer blackout insulation with closed-cell foam wraps the full unit. Heat retention blanket across the top. In sub-zero operation, the heaters cycle infrequently because the insulation holds what they produce. Operating cost stays in a livable range.
Buyers in Minnesota, upstate New York, northern Michigan, and Colorado run this unit year-round. Your electricity rate determines your monthly cost, but the insulation spec removes the "unusable in winter" problem that kills cheaper swim spas.
| Specification | What it means for you |
|---|---|
| Swim Lane System (W-stream) | Three resistance jets plus two profile-aligning jets. The profile jets keep you centered so you swim in a straight line. This is the mechanical difference between a training swim spa and an expensive water feature. |
| Dual-zone independent heating | Swim zone at 80°F while hydrotherapy zone runs 104°F at the same time. Ends the temperature compromise between swimmers and soakers. |
| 10-ft flat swim lane | No steps, benches, or obstacles in the lane. Full-body stroke work uninterrupted. |
| 72 adjustable jets | Highest jet count in the swim spa lineup. Hydrotherapy zone delivers real targeted therapy across 15-person capacity. |
| Aristech Lucite® acrylic shell | Commercial-pool-grade shell material with fiberglass and Vinyl Ester Resin. Decades of freeze-thaw, UV, and heavy-use durability. |
| 200 sq.ft Glacier filtration + ozone | Handles the volume of a 15-person swim spa. Optional AO₃P UV upgrade cuts chemical use 80%. |
Questions about accessories or upgrades? Call 866-861-6317 before ordering.
| Model | St. Lawrence 16ft Swim Spa (KS-10028) |
| Length | 16 feet |
| Seating | 15 persons |
| Total jets | 72 adjustable hydrotherapy jets |
| Swim system | Swim Lane (3 resistance + 2 profile-aligning jets in W-stream) |
| Swim lane | 10-ft flat lane, no steps or benches |
| Zone config | Dual-zone (independent temperature control) |
| Filtration | 200 sq.ft Glacier antimicrobial system + ozone generator |
| Optional upgrade | Glacier AO₃P UV, cuts chemical use by up to 80% |
| Waterfalls | 2 cascading |
| Audio | Pop-up Bluetooth speakers |
| Lighting | Perimeter multi-color LED |
| Aromatherapy | Built-in aromatherapy chamber |
| SKU | KS-10028 |
| Feature | St. Lawrence 13ft | St. Lawrence 16ft ★ | St. Lawrence 20ft |
|---|---|---|---|
| Price | $34,999 | $41,999 | $48,999 |
| Length | 13 ft | 16 ft | 20 ft |
| Capacity | 12 | 15 | 17 |
| Jets | 39 | 72 | 73 |
| Swim pumps | 3 × 5HP | 3 + 2 profile | 5 pumps / 3 river jets |
| Zone config | Single | Dual-zone | Dual-zone |
| Best for | Smaller yards | Serious swimmers | Training + family |
A backyard pool plus a separate hot tub typically runs 80 to 140 thousand installed in cold climates, plus permitting, concrete, enclosure, and ongoing chemistry for two systems. A swim spa collapses both into one unit with lower total install cost, lower operating cost, and year-round use instead of a 4-month outdoor pool season.
Financing is available through multiple partners. Most swim spa buyers structure payments over 60 to 84 months. Call 866-861-6317 before ordering to discuss monthly structures.
We confirm your order and call within 1 business day to verify address, delivery access, and electrical readiness. If anything's unclear, we flag it now, not on delivery day.
Lead time typically 3 to 6 weeks. You receive tracking and a confirmed delivery window.
Crane placement to your prepared concrete pad in most cases. Have the 240V-50A dedicated circuit wired and ready before delivery day.
We walk through water chemistry, filter startup, and temperature calibration. Call 866-861-6317 with any questions after your first fill.
Freight carrier with liftgate delivery to the contiguous US. Final positioning to pad, deck, or patio is your installer's job or a 2-to-4-person moving crew.
Electrical: 240V-50A dedicated circuit required, installed by a licensed electrician before delivery. Concrete pad rated for filled weight. Crane placement is typical for site access.
Call 866-861-6317 before ordering to confirm delivery logistics, site access, and structural support for your address.
At RecovAthlete, we’re here to support your recovery and performance goals—without overpaying. Our 120% Price Match Guarantee makes sure you always get the best deal. If you find a lower price, not only will we match it, we’ll beat it by adding 20% of the price difference back to your refund.
We don’t undercut manufacturers or sell below cost. We follow ethical pricing standards prioritizing fairness, brand integrity, and long-term trust.
With our 120% Price Match Guarantee, you can shop knowing you’ll never miss out on a better deal—because we’ll beat it.
✔ Authorized Canadian Spa Company retailer. RecovAthlete ships and supports the full lineup across the US.
The Canadian Spa St. Lawrence 16ft Swim Spa (KS-10028) is built around one idea: give serious swimmers a current worth training against. The patented Swim Lane System uses three resistance jets plus two profile-aligning jets in a W-stream layout. The profile jets keep you centered so you're swimming in a straight line instead of drifting into the wall.
Dual-zone temperature control: swim at 80°F while others soak at 104°F at the same time. No pre-heating. No choosing between workout and recovery. 72 adjustable hydrotherapy jets across a 15-person capacity. Aristech Lucite® acrylic shell with fiberglass reinforcement. Built for daily year-round training in sub-zero climates.
The common failure mode of budget swim spas is single-jet current. One jet fires water at you. You drift sideways. You spend the session fighting to stay in the lane instead of swimming. The workout stops being a workout.
The St. Lawrence 16ft uses a three-jet resistance system plus two profile-aligning jets arranged in a W-stream. The resistance jets produce the current. The profile jets run along your sides to keep your body centered. You swim in a straight line, forward, stroke after stroke.
At competitive pace, the current is strong enough that you can't outrun it. You swim in place. That's the test of a training-grade swim spa: can you hold your position against the current long enough to finish a real set?
In a single-zone swim spa, one temperature rules the whole tub. Swimmers want 78°F to 82°F. Soakers want 102°F to 104°F. Whoever uses the unit first sets the temperature. Everyone else waits for it to shift, which takes hours.
The 16ft uses two independent heating systems. Swim zone runs at your training temperature. Hydrotherapy zone runs at your recovery temperature. Same unit, same time, different water. This is the feature most buyers wish they'd specified when they ordered their first swim spa.
Practical use: partner swims before dinner while you soak post-work. Kids swim while adults soak after. Post-swim transition from 80°F lane to 104°F hydrotherapy for cold-to-warm recovery protocol.
Aristech Lucite® acrylic shell with fiberglass reinforcement and Vinyl Ester Resin. This is commercial-pool-grade construction. The shell won't crack, warp, or fade in freeze-thaw cycles. Most outdoor pools in cold climates crack within a decade; this construction is the reason the St. Lawrence doesn't.
7-layer blackout insulation with closed-cell foam wraps the full unit. Heat retention blanket across the top. In sub-zero operation, the heaters cycle infrequently because the insulation holds what they produce. Operating cost stays in a livable range.
Buyers in Minnesota, upstate New York, northern Michigan, and Colorado run this unit year-round. Your electricity rate determines your monthly cost, but the insulation spec removes the "unusable in winter" problem that kills cheaper swim spas.
| Specification | What it means for you |
|---|---|
| Swim Lane System (W-stream) | Three resistance jets plus two profile-aligning jets. The profile jets keep you centered so you swim in a straight line. This is the mechanical difference between a training swim spa and an expensive water feature. |
| Dual-zone independent heating | Swim zone at 80°F while hydrotherapy zone runs 104°F at the same time. Ends the temperature compromise between swimmers and soakers. |
| 10-ft flat swim lane | No steps, benches, or obstacles in the lane. Full-body stroke work uninterrupted. |
| 72 adjustable jets | Highest jet count in the swim spa lineup. Hydrotherapy zone delivers real targeted therapy across 15-person capacity. |
| Aristech Lucite® acrylic shell | Commercial-pool-grade shell material with fiberglass and Vinyl Ester Resin. Decades of freeze-thaw, UV, and heavy-use durability. |
| 200 sq.ft Glacier filtration + ozone | Handles the volume of a 15-person swim spa. Optional AO₃P UV upgrade cuts chemical use 80%. |
Questions about accessories or upgrades? Call 866-861-6317 before ordering.
| Model | St. Lawrence 16ft Swim Spa (KS-10028) |
| Length | 16 feet |
| Seating | 15 persons |
| Total jets | 72 adjustable hydrotherapy jets |
| Swim system | Swim Lane (3 resistance + 2 profile-aligning jets in W-stream) |
| Swim lane | 10-ft flat lane, no steps or benches |
| Zone config | Dual-zone (independent temperature control) |
| Filtration | 200 sq.ft Glacier antimicrobial system + ozone generator |
| Optional upgrade | Glacier AO₃P UV, cuts chemical use by up to 80% |
| Waterfalls | 2 cascading |
| Audio | Pop-up Bluetooth speakers |
| Lighting | Perimeter multi-color LED |
| Aromatherapy | Built-in aromatherapy chamber |
| SKU | KS-10028 |
| Feature | St. Lawrence 13ft | St. Lawrence 16ft ★ | St. Lawrence 20ft |
|---|---|---|---|
| Price | $34,999 | $41,999 | $48,999 |
| Length | 13 ft | 16 ft | 20 ft |
| Capacity | 12 | 15 | 17 |
| Jets | 39 | 72 | 73 |
| Swim pumps | 3 × 5HP | 3 + 2 profile | 5 pumps / 3 river jets |
| Zone config | Single | Dual-zone | Dual-zone |
| Best for | Smaller yards | Serious swimmers | Training + family |
A backyard pool plus a separate hot tub typically runs 80 to 140 thousand installed in cold climates, plus permitting, concrete, enclosure, and ongoing chemistry for two systems. A swim spa collapses both into one unit with lower total install cost, lower operating cost, and year-round use instead of a 4-month outdoor pool season.
Financing is available through multiple partners. Most swim spa buyers structure payments over 60 to 84 months. Call 866-861-6317 before ordering to discuss monthly structures.
We confirm your order and call within 1 business day to verify address, delivery access, and electrical readiness. If anything's unclear, we flag it now, not on delivery day.
Lead time typically 3 to 6 weeks. You receive tracking and a confirmed delivery window.
Crane placement to your prepared concrete pad in most cases. Have the 240V-50A dedicated circuit wired and ready before delivery day.
We walk through water chemistry, filter startup, and temperature calibration. Call 866-861-6317 with any questions after your first fill.
Freight carrier with liftgate delivery to the contiguous US. Final positioning to pad, deck, or patio is your installer's job or a 2-to-4-person moving crew.
Electrical: 240V-50A dedicated circuit required, installed by a licensed electrician before delivery. Concrete pad rated for filled weight. Crane placement is typical for site access.
Call 866-861-6317 before ordering to confirm delivery logistics, site access, and structural support for your address.
Whether you're buying for personal use or outfitting a gym, clinic, or medspa, we've partnered with trusted financing companies to give you flexible ways to pay. Apply in minutes. Get a decision fast. Pay over time.
RecovAthlete has no control over any financing decision. Approval is based on your creditworthiness and is solely the lender's decision.
Buying a hyperbaric chamber, Pilates reformer, or infrared sauna for personal use? Affirm lets you split the cost into manageable payments.
Add equipment to your cart and select Affirm at checkout.
Provide a few details: name, phone number, date of birth.
Get a real-time decision. Most approvals happen in seconds.
Choose the payment plan that fits your budget. Your order ships.
No hidden fees. No origination fees, no prepayment penalties, and no late fees.
No credit score impact to apply. Soft check for prequalification. Monthly plans may involve a hard inquiry.
Pay it off early. No penalty. No extra charges. Close out your balance whenever you want.
Credit reporting. Affirm reports to Experian and TransUnion. On-time payments help. Late payments hurt.
Minimum purchase: $35.
U.S. shipping address required.
Outfitting a gym, clinic, medspa, chiropractic office, or wellness studio? We work with four commercial financing partners so you can preserve cash flow and get the equipment your business needs now. Every partner has different strengths. We recommend applying with more than one to compare offers.
A private direct lender specializing in equipment financing since 2003. They make credit decisions in-house, which means faster approvals and more flexibility than a traditional bank.
Provides equipment financing and leasing for medical, aesthetic, wellness, and other industries. Acts as both a direct lender and broker, giving them access to a wider range of credit options.
A lending marketplace that connects you with 30+ lenders. Fill out one application and receive multiple personalized loan offers to compare side by side.
KWIPPED's APPROVE platform sends your application to a network of top equipment finance companies. Lenders compete to earn your business, which drives better rates and higher approval odds.
✔ Authorized Canadian Spa Company retailer. RecovAthlete ships and supports the full lineup across the US.
The Canadian Spa St. Lawrence 16ft Swim Spa (KS-10028) is built around one idea: give serious swimmers a current worth training against. The patented Swim Lane System uses three resistance jets plus two profile-aligning jets in a W-stream layout. The profile jets keep you centered so you're swimming in a straight line instead of drifting into the wall.
Dual-zone temperature control: swim at 80°F while others soak at 104°F at the same time. No pre-heating. No choosing between workout and recovery. 72 adjustable hydrotherapy jets across a 15-person capacity. Aristech Lucite® acrylic shell with fiberglass reinforcement. Built for daily year-round training in sub-zero climates.
The common failure mode of budget swim spas is single-jet current. One jet fires water at you. You drift sideways. You spend the session fighting to stay in the lane instead of swimming. The workout stops being a workout.
The St. Lawrence 16ft uses a three-jet resistance system plus two profile-aligning jets arranged in a W-stream. The resistance jets produce the current. The profile jets run along your sides to keep your body centered. You swim in a straight line, forward, stroke after stroke.
At competitive pace, the current is strong enough that you can't outrun it. You swim in place. That's the test of a training-grade swim spa: can you hold your position against the current long enough to finish a real set?
In a single-zone swim spa, one temperature rules the whole tub. Swimmers want 78°F to 82°F. Soakers want 102°F to 104°F. Whoever uses the unit first sets the temperature. Everyone else waits for it to shift, which takes hours.
The 16ft uses two independent heating systems. Swim zone runs at your training temperature. Hydrotherapy zone runs at your recovery temperature. Same unit, same time, different water. This is the feature most buyers wish they'd specified when they ordered their first swim spa.
Practical use: partner swims before dinner while you soak post-work. Kids swim while adults soak after. Post-swim transition from 80°F lane to 104°F hydrotherapy for cold-to-warm recovery protocol.
Aristech Lucite® acrylic shell with fiberglass reinforcement and Vinyl Ester Resin. This is commercial-pool-grade construction. The shell won't crack, warp, or fade in freeze-thaw cycles. Most outdoor pools in cold climates crack within a decade; this construction is the reason the St. Lawrence doesn't.
7-layer blackout insulation with closed-cell foam wraps the full unit. Heat retention blanket across the top. In sub-zero operation, the heaters cycle infrequently because the insulation holds what they produce. Operating cost stays in a livable range.
Buyers in Minnesota, upstate New York, northern Michigan, and Colorado run this unit year-round. Your electricity rate determines your monthly cost, but the insulation spec removes the "unusable in winter" problem that kills cheaper swim spas.
| Specification | What it means for you |
|---|---|
| Swim Lane System (W-stream) | Three resistance jets plus two profile-aligning jets. The profile jets keep you centered so you swim in a straight line. This is the mechanical difference between a training swim spa and an expensive water feature. |
| Dual-zone independent heating | Swim zone at 80°F while hydrotherapy zone runs 104°F at the same time. Ends the temperature compromise between swimmers and soakers. |
| 10-ft flat swim lane | No steps, benches, or obstacles in the lane. Full-body stroke work uninterrupted. |
| 72 adjustable jets | Highest jet count in the swim spa lineup. Hydrotherapy zone delivers real targeted therapy across 15-person capacity. |
| Aristech Lucite® acrylic shell | Commercial-pool-grade shell material with fiberglass and Vinyl Ester Resin. Decades of freeze-thaw, UV, and heavy-use durability. |
| 200 sq.ft Glacier filtration + ozone | Handles the volume of a 15-person swim spa. Optional AO₃P UV upgrade cuts chemical use 80%. |
Questions about accessories or upgrades? Call 866-861-6317 before ordering.
| Model | St. Lawrence 16ft Swim Spa (KS-10028) |
| Length | 16 feet |
| Seating | 15 persons |
| Total jets | 72 adjustable hydrotherapy jets |
| Swim system | Swim Lane (3 resistance + 2 profile-aligning jets in W-stream) |
| Swim lane | 10-ft flat lane, no steps or benches |
| Zone config | Dual-zone (independent temperature control) |
| Filtration | 200 sq.ft Glacier antimicrobial system + ozone generator |
| Optional upgrade | Glacier AO₃P UV, cuts chemical use by up to 80% |
| Waterfalls | 2 cascading |
| Audio | Pop-up Bluetooth speakers |
| Lighting | Perimeter multi-color LED |
| Aromatherapy | Built-in aromatherapy chamber |
| SKU | KS-10028 |
| Feature | St. Lawrence 13ft | St. Lawrence 16ft ★ | St. Lawrence 20ft |
|---|---|---|---|
| Price | $34,999 | $41,999 | $48,999 |
| Length | 13 ft | 16 ft | 20 ft |
| Capacity | 12 | 15 | 17 |
| Jets | 39 | 72 | 73 |
| Swim pumps | 3 × 5HP | 3 + 2 profile | 5 pumps / 3 river jets |
| Zone config | Single | Dual-zone | Dual-zone |
| Best for | Smaller yards | Serious swimmers | Training + family |
A backyard pool plus a separate hot tub typically runs 80 to 140 thousand installed in cold climates, plus permitting, concrete, enclosure, and ongoing chemistry for two systems. A swim spa collapses both into one unit with lower total install cost, lower operating cost, and year-round use instead of a 4-month outdoor pool season.
Financing is available through multiple partners. Most swim spa buyers structure payments over 60 to 84 months. Call 866-861-6317 before ordering to discuss monthly structures.
We confirm your order and call within 1 business day to verify address, delivery access, and electrical readiness. If anything's unclear, we flag it now, not on delivery day.
Lead time typically 3 to 6 weeks. You receive tracking and a confirmed delivery window.
Crane placement to your prepared concrete pad in most cases. Have the 240V-50A dedicated circuit wired and ready before delivery day.
We walk through water chemistry, filter startup, and temperature calibration. Call 866-861-6317 with any questions after your first fill.
Freight carrier with liftgate delivery to the contiguous US. Final positioning to pad, deck, or patio is your installer's job or a 2-to-4-person moving crew.
Electrical: 240V-50A dedicated circuit required, installed by a licensed electrician before delivery. Concrete pad rated for filled weight. Crane placement is typical for site access.
Call 866-861-6317 before ordering to confirm delivery logistics, site access, and structural support for your address.
All Canadian Spa Company orders include complimentary curbside delivery. Returns are accepted within 30 days with a confirmed RMA number. Read the full policy below before ordering — questions can go to 866-861-6317 or info@recovathlete.com.
Every Canadian Spa Company order ships with complimentary curbside delivery. Once your spa arrives at the local freight terminal, our team contacts you to schedule a delivery window.
| Cost | Complimentary — included with every spa purchase |
| Delivery notification | Advance notice once spa reaches local freight terminal |
| Scheduling | Coordinated with you after terminal arrival |
| Remote locations | Some remote addresses restricted to curbside only — confirm at time of order |
| Challenging access | Additional fees may apply — flagged during pre-delivery site assessment |
Delivery places your spa at the curb. Final placement, base preparation, and electrical connection are your responsibility and must be arranged before the delivery date.
| Return window | 30 days from date of receipt |
| RMA number | Required — contact us before shipping any return |
| Return shipping | Buyer's responsibility |
| Restocking fee | 10% of original cost if item cannot be resold as new |
| Condition required | Original, unused, unaltered — all components and original packaging included |
| Refund processing | 3–5 business days after receipt — returned to original payment method |
| Proof of delivery | Recommended — retain tracking confirmation until refund completes |
Orders can be cancelled before dispatch. Contact us with your order number at info@recovathlete.com or 866-861-6317. Once shipped, the standard 30-day return policy applies.
For return authorizations (RMA), delivery questions, or order issues:
✔ Authorized Canadian Spa Company retailer. RecovAthlete ships and supports the full lineup across the US.
The Canadian Spa St. Lawrence 16ft Swim Spa (KS-10028) is built around one idea: give serious swimmers a current worth training against. The patented Swim Lane System uses three resistance jets plus two profile-aligning jets in a W-stream layout. The profile jets keep you centered so you're swimming in a straight line instead of drifting into the wall.
Dual-zone temperature control: swim at 80°F while others soak at 104°F at the same time. No pre-heating. No choosing between workout and recovery. 72 adjustable hydrotherapy jets across a 15-person capacity. Aristech Lucite® acrylic shell with fiberglass reinforcement. Built for daily year-round training in sub-zero climates.
The common failure mode of budget swim spas is single-jet current. One jet fires water at you. You drift sideways. You spend the session fighting to stay in the lane instead of swimming. The workout stops being a workout.
The St. Lawrence 16ft uses a three-jet resistance system plus two profile-aligning jets arranged in a W-stream. The resistance jets produce the current. The profile jets run along your sides to keep your body centered. You swim in a straight line, forward, stroke after stroke.
At competitive pace, the current is strong enough that you can't outrun it. You swim in place. That's the test of a training-grade swim spa: can you hold your position against the current long enough to finish a real set?
In a single-zone swim spa, one temperature rules the whole tub. Swimmers want 78°F to 82°F. Soakers want 102°F to 104°F. Whoever uses the unit first sets the temperature. Everyone else waits for it to shift, which takes hours.
The 16ft uses two independent heating systems. Swim zone runs at your training temperature. Hydrotherapy zone runs at your recovery temperature. Same unit, same time, different water. This is the feature most buyers wish they'd specified when they ordered their first swim spa.
Practical use: partner swims before dinner while you soak post-work. Kids swim while adults soak after. Post-swim transition from 80°F lane to 104°F hydrotherapy for cold-to-warm recovery protocol.
Aristech Lucite® acrylic shell with fiberglass reinforcement and Vinyl Ester Resin. This is commercial-pool-grade construction. The shell won't crack, warp, or fade in freeze-thaw cycles. Most outdoor pools in cold climates crack within a decade; this construction is the reason the St. Lawrence doesn't.
7-layer blackout insulation with closed-cell foam wraps the full unit. Heat retention blanket across the top. In sub-zero operation, the heaters cycle infrequently because the insulation holds what they produce. Operating cost stays in a livable range.
Buyers in Minnesota, upstate New York, northern Michigan, and Colorado run this unit year-round. Your electricity rate determines your monthly cost, but the insulation spec removes the "unusable in winter" problem that kills cheaper swim spas.
| Specification | What it means for you |
|---|---|
| Swim Lane System (W-stream) | Three resistance jets plus two profile-aligning jets. The profile jets keep you centered so you swim in a straight line. This is the mechanical difference between a training swim spa and an expensive water feature. |
| Dual-zone independent heating | Swim zone at 80°F while hydrotherapy zone runs 104°F at the same time. Ends the temperature compromise between swimmers and soakers. |
| 10-ft flat swim lane | No steps, benches, or obstacles in the lane. Full-body stroke work uninterrupted. |
| 72 adjustable jets | Highest jet count in the swim spa lineup. Hydrotherapy zone delivers real targeted therapy across 15-person capacity. |
| Aristech Lucite® acrylic shell | Commercial-pool-grade shell material with fiberglass and Vinyl Ester Resin. Decades of freeze-thaw, UV, and heavy-use durability. |
| 200 sq.ft Glacier filtration + ozone | Handles the volume of a 15-person swim spa. Optional AO₃P UV upgrade cuts chemical use 80%. |
Questions about accessories or upgrades? Call 866-861-6317 before ordering.
| Model | St. Lawrence 16ft Swim Spa (KS-10028) |
| Length | 16 feet |
| Seating | 15 persons |
| Total jets | 72 adjustable hydrotherapy jets |
| Swim system | Swim Lane (3 resistance + 2 profile-aligning jets in W-stream) |
| Swim lane | 10-ft flat lane, no steps or benches |
| Zone config | Dual-zone (independent temperature control) |
| Filtration | 200 sq.ft Glacier antimicrobial system + ozone generator |
| Optional upgrade | Glacier AO₃P UV, cuts chemical use by up to 80% |
| Waterfalls | 2 cascading |
| Audio | Pop-up Bluetooth speakers |
| Lighting | Perimeter multi-color LED |
| Aromatherapy | Built-in aromatherapy chamber |
| SKU | KS-10028 |
| Feature | St. Lawrence 13ft | St. Lawrence 16ft ★ | St. Lawrence 20ft |
|---|---|---|---|
| Price | $34,999 | $41,999 | $48,999 |
| Length | 13 ft | 16 ft | 20 ft |
| Capacity | 12 | 15 | 17 |
| Jets | 39 | 72 | 73 |
| Swim pumps | 3 × 5HP | 3 + 2 profile | 5 pumps / 3 river jets |
| Zone config | Single | Dual-zone | Dual-zone |
| Best for | Smaller yards | Serious swimmers | Training + family |
A backyard pool plus a separate hot tub typically runs 80 to 140 thousand installed in cold climates, plus permitting, concrete, enclosure, and ongoing chemistry for two systems. A swim spa collapses both into one unit with lower total install cost, lower operating cost, and year-round use instead of a 4-month outdoor pool season.
Financing is available through multiple partners. Most swim spa buyers structure payments over 60 to 84 months. Call 866-861-6317 before ordering to discuss monthly structures.
We confirm your order and call within 1 business day to verify address, delivery access, and electrical readiness. If anything's unclear, we flag it now, not on delivery day.
Lead time typically 3 to 6 weeks. You receive tracking and a confirmed delivery window.
Crane placement to your prepared concrete pad in most cases. Have the 240V-50A dedicated circuit wired and ready before delivery day.
We walk through water chemistry, filter startup, and temperature calibration. Call 866-861-6317 with any questions after your first fill.
Freight carrier with liftgate delivery to the contiguous US. Final positioning to pad, deck, or patio is your installer's job or a 2-to-4-person moving crew.
Electrical: 240V-50A dedicated circuit required, installed by a licensed electrician before delivery. Concrete pad rated for filled weight. Crane placement is typical for site access.
Call 866-861-6317 before ordering to confirm delivery logistics, site access, and structural support for your address.
Have Questions? Talk to Our Equipment Team.
We respond within 2 hours.
US & Canada shipping. Financing available.










































