There is an upside down U shaped response curve when it comes to red light benefits More is not always better! The great thing about Halotherpy Solutions’ red light devices is that you can reap the same benefits in less time versus other products on the market. 5-15 minutes a day is really all you will need. Having said that, Red (620-700nm) and NIR (800-900nm) light is very safe and there are no known negative side effects after over 3,000 clinical studies.

Our devices are engineered to have low EMFs. However, anything with electric current running through it is going to generate some electromagnetic field. At the recommended usage distance of 6+ inches our devices emit no detectable levels of EMF. On balance our devices are going to be much lower in EMFs than other products because our lights contain only the electrical components needed to power and cool the lights (nothing extraneous added such as bluetooth / WiFi). Of particular concern are products which come with an ‘app’. Having an app necessitates a WiFi / bluetooth signal from the device. Many times these devices can emit a signal even when they are not in use! This means you could be unknowingly polluting your environment with EMFs 24/7.

Some LED light manufacturers use a wide beam angle of 90 degrees. The problem with using a wide beam angle is that the power density drops quickly over distance. The angle that light comes out of a light source is the main factor in determining how the power density drops over distance. Wide beam angles (90 degrees) make the power density weaken very soon. If you are planning to use the light to treat a larger area (and therefore plan on sitting / standing back further from the device), you absolutely want a narrower beam angle. Our red lights use a narrow beam angle of 60 degrees to ensure therapeutic power density at further distances.

The most well studied mechanism of action surrounding red and near infrared light therapy is increased Mitochondrial energy production in the cells. Mitochondria are tiny organelles that are the energy power plants of all the cells in our body. Red and near infrared light therapy helps the Mitochondria create more of that energy. The specific photons found in red and near infrared light interact with a photoreceptors within our cells called cytochrome c oxidase. This interaction stimulates the mitochondria in our cells to use oxygen more efficiently, which allows the mitochondria to produce more ATP (adenosine triphosphate). Adenosine triphosphate is a complex organic chemical that provides energy to drive many processes in living cells, e.g. muscle contraction, nerve impulse propagation, and chemical synthesis. Found in all forms of life, ATP is often referred to as the “molecular unit of currency” of intracellular energy transfer. When our cells have more energy, they simply perform better and the body follows suit!

Our lights have been third-party tested and validated by an independent testing laboratory. Other red light therapy lights on the market may appear similar – but the reality is unless those companies publish transparent, independent testing data, you just don’t know what you are getting. And again, our customers’ real-life results speak volumes.

While there is a growing body of scientific research suggesting that modest amounts of red and NIR LED light may benefit certain eye conditions, our plug-in lights are very bright! As such, goggles are provided and should be worn when facing the lights, particularly when NIR is active. When using, DO NOT stare directly into the light emitting diodes (LEDs). Again, our Red Lights are very bright and if you have any eye problems, or any other health conditions at all, please consult with a licensed healthcare professional before using a red light therapy device.

Most users notice changes within 2–3 weeks of consistent use (3–5 sessions/week). Skin looks brighter, breathing improves, and soreness fades gradually.

Yes, daily use is safe for most people. Stick to 10–20 minutes per session. Use protective goggles if you’re sensitive to bright light.

Users report improvements in acne, eczema, joint pain, inflammation, asthma, sinus congestion, stress, and poor sleep. Results vary by condition and consistency.

Yes. The booth combines full-body red light + halotherapy in one unit. Smaller devices only treat small areas. Salt rooms don’t include light therapy. Halo Red offers both — saving time and delivering more complete results.

Generally safe, but if you’re pregnant, have lupus, severe asthma, or are light-sensitive, consult your doctor before starting.

Assembly takes 60–90 minutes with two people. Instructions and video guides are provided. White-glove delivery and setup are available.

The built-in UV light system activates between sessions to sanitize the interior — no sprays or manual cleaning required.

50,000+ hours (up to 17 years at 8 hours/day). Panels are covered by a 2–3 year warranty, depending on your model.

Contact our U.S.-based support team. Warranties cover the halogenerator for life, red lights for 2 years, and structural components for 5 years.

There is an upside down U shaped response curve when it comes to red light benefits More is not always better! The great thing about Halotherpy Solutions’ red light devices is that you can reap the same benefits in less time versus other products on the market. 5-15 minutes a day is really all you will need. Having said that, Red (620-700nm) and NIR (800-900nm) light is very safe and there are no known negative side effects after over 3,000 clinical studies.

Our devices are engineered to have low EMFs. However, anything with electric current running through it is going to generate some electromagnetic field. At the recommended usage distance of 6+ inches our devices emit no detectable levels of EMF. On balance our devices are going to be much lower in EMFs than other products because our lights contain only the electrical components needed to power and cool the lights (nothing extraneous added such as bluetooth / WiFi). Of particular concern are products which come with an ‘app’. Having an app necessitates a WiFi / bluetooth signal from the device. Many times these devices can emit a signal even when they are not in use! This means you could be unknowingly polluting your environment with EMFs 24/7.

Some LED light manufacturers use a wide beam angle of 90 degrees. The problem with using a wide beam angle is that the power density drops quickly over distance. The angle that light comes out of a light source is the main factor in determining how the power density drops over distance. Wide beam angles (90 degrees) make the power density weaken very soon. If you are planning to use the light to treat a larger area (and therefore plan on sitting / standing back further from the device), you absolutely want a narrower beam angle. Our red lights use a narrow beam angle of 60 degrees to ensure therapeutic power density at further distances.

The most well studied mechanism of action surrounding red and near infrared light therapy is increased Mitochondrial energy production in the cells. Mitochondria are tiny organelles that are the energy power plants of all the cells in our body. Red and near infrared light therapy helps the Mitochondria create more of that energy. The specific photons found in red and near infrared light interact with a photoreceptors within our cells called cytochrome c oxidase. This interaction stimulates the mitochondria in our cells to use oxygen more efficiently, which allows the mitochondria to produce more ATP (adenosine triphosphate). Adenosine triphosphate is a complex organic chemical that provides energy to drive many processes in living cells, e.g. muscle contraction, nerve impulse propagation, and chemical synthesis. Found in all forms of life, ATP is often referred to as the “molecular unit of currency” of intracellular energy transfer. When our cells have more energy, they simply perform better and the body follows suit!

Our lights have been third-party tested and validated by an independent testing laboratory. Other red light therapy lights on the market may appear similar – but the reality is unless those companies publish transparent, independent testing data, you just don’t know what you are getting. And again, our customers’ real-life results speak volumes.

While there is a growing body of scientific research suggesting that modest amounts of red and NIR LED light may benefit certain eye conditions, our plug-in lights are very bright! As such, goggles are provided and should be worn when facing the lights, particularly when NIR is active. When using, DO NOT stare directly into the light emitting diodes (LEDs). Again, our Red Lights are very bright and if you have any eye problems, or any other health conditions at all, please consult with a licensed healthcare professional before using a red light therapy device.

Most users notice changes within 2–3 weeks of consistent use (3–5 sessions/week). Skin looks brighter, breathing improves, and soreness fades gradually.

Yes, daily use is safe for most people. Stick to 10–20 minutes per session. Use protective goggles if you’re sensitive to bright light.

Users report improvements in acne, eczema, joint pain, inflammation, asthma, sinus congestion, stress, and poor sleep. Results vary by condition and consistency.

Yes. The booth combines full-body red light + halotherapy in one unit. Smaller devices only treat small areas. Salt rooms don’t include light therapy. Halo Red offers both — saving time and delivering more complete results.

Generally safe, but if you’re pregnant, have lupus, severe asthma, or are light-sensitive, consult your doctor before starting.

Assembly takes 60–90 minutes with two people. Instructions and video guides are provided. White-glove delivery and setup are available.

The built-in UV light system activates between sessions to sanitize the interior — no sprays or manual cleaning required.

50,000+ hours (up to 17 years at 8 hours/day). Panels are covered by a 2–3 year warranty, depending on your model.

Contact our U.S.-based support team. Warranties cover the halogenerator for life, red lights for 2 years, and structural components for 5 years.

There is an upside down U shaped response curve when it comes to red light benefits More is not always better! The great thing about Halotherpy Solutions’ red light devices is that you can reap the same benefits in less time versus other products on the market. 5-15 minutes a day is really all you will need. Having said that, Red (620-700nm) and NIR (800-900nm) light is very safe and there are no known negative side effects after over 3,000 clinical studies.

Our devices are engineered to have low EMFs. However, anything with electric current running through it is going to generate some electromagnetic field. At the recommended usage distance of 6+ inches our devices emit no detectable levels of EMF. On balance our devices are going to be much lower in EMFs than other products because our lights contain only the electrical components needed to power and cool the lights (nothing extraneous added such as bluetooth / WiFi). Of particular concern are products which come with an ‘app’. Having an app necessitates a WiFi / bluetooth signal from the device. Many times these devices can emit a signal even when they are not in use! This means you could be unknowingly polluting your environment with EMFs 24/7.

Some LED light manufacturers use a wide beam angle of 90 degrees. The problem with using a wide beam angle is that the power density drops quickly over distance. The angle that light comes out of a light source is the main factor in determining how the power density drops over distance. Wide beam angles (90 degrees) make the power density weaken very soon. If you are planning to use the light to treat a larger area (and therefore plan on sitting / standing back further from the device), you absolutely want a narrower beam angle. Our red lights use a narrow beam angle of 60 degrees to ensure therapeutic power density at further distances.

The most well studied mechanism of action surrounding red and near infrared light therapy is increased Mitochondrial energy production in the cells. Mitochondria are tiny organelles that are the energy power plants of all the cells in our body. Red and near infrared light therapy helps the Mitochondria create more of that energy. The specific photons found in red and near infrared light interact with a photoreceptors within our cells called cytochrome c oxidase. This interaction stimulates the mitochondria in our cells to use oxygen more efficiently, which allows the mitochondria to produce more ATP (adenosine triphosphate). Adenosine triphosphate is a complex organic chemical that provides energy to drive many processes in living cells, e.g. muscle contraction, nerve impulse propagation, and chemical synthesis. Found in all forms of life, ATP is often referred to as the “molecular unit of currency” of intracellular energy transfer. When our cells have more energy, they simply perform better and the body follows suit!

Our lights have been third-party tested and validated by an independent testing laboratory. Other red light therapy lights on the market may appear similar – but the reality is unless those companies publish transparent, independent testing data, you just don’t know what you are getting. And again, our customers’ real-life results speak volumes.

While there is a growing body of scientific research suggesting that modest amounts of red and NIR LED light may benefit certain eye conditions, our plug-in lights are very bright! As such, goggles are provided and should be worn when facing the lights, particularly when NIR is active. When using, DO NOT stare directly into the light emitting diodes (LEDs). Again, our Red Lights are very bright and if you have any eye problems, or any other health conditions at all, please consult with a licensed healthcare professional before using a red light therapy device.

Most users notice changes within 2–3 weeks of consistent use (3–5 sessions/week). Skin looks brighter, breathing improves, and soreness fades gradually.

Yes, daily use is safe for most people. Stick to 10–20 minutes per session. Use protective goggles if you’re sensitive to bright light.

Users report improvements in acne, eczema, joint pain, inflammation, asthma, sinus congestion, stress, and poor sleep. Results vary by condition and consistency.

Yes. The booth combines full-body red light + halotherapy in one unit. Smaller devices only treat small areas. Salt rooms don’t include light therapy. Halo Red offers both — saving time and delivering more complete results.

Generally safe, but if you’re pregnant, have lupus, severe asthma, or are light-sensitive, consult your doctor before starting.

Assembly takes 60–90 minutes with two people. Instructions and video guides are provided. White-glove delivery and setup are available.

The built-in UV light system activates between sessions to sanitize the interior — no sprays or manual cleaning required.

50,000+ hours (up to 17 years at 8 hours/day). Panels are covered by a 2–3 year warranty, depending on your model.

Contact our U.S.-based support team. Warranties cover the halogenerator for life, red lights for 2 years, and structural components for 5 years.

There is an upside down U shaped response curve when it comes to red light benefits More is not always better! The great thing about Halotherpy Solutions’ red light devices is that you can reap the same benefits in less time versus other products on the market. 5-15 minutes a day is really all you will need. Having said that, Red (620-700nm) and NIR (800-900nm) light is very safe and there are no known negative side effects after over 3,000 clinical studies.

Our devices are engineered to have low EMFs. However, anything with electric current running through it is going to generate some electromagnetic field. At the recommended usage distance of 6+ inches our devices emit no detectable levels of EMF. On balance our devices are going to be much lower in EMFs than other products because our lights contain only the electrical components needed to power and cool the lights (nothing extraneous added such as bluetooth / WiFi). Of particular concern are products which come with an ‘app’. Having an app necessitates a WiFi / bluetooth signal from the device. Many times these devices can emit a signal even when they are not in use! This means you could be unknowingly polluting your environment with EMFs 24/7.

Some LED light manufacturers use a wide beam angle of 90 degrees. The problem with using a wide beam angle is that the power density drops quickly over distance. The angle that light comes out of a light source is the main factor in determining how the power density drops over distance. Wide beam angles (90 degrees) make the power density weaken very soon. If you are planning to use the light to treat a larger area (and therefore plan on sitting / standing back further from the device), you absolutely want a narrower beam angle. Our red lights use a narrow beam angle of 60 degrees to ensure therapeutic power density at further distances.

The most well studied mechanism of action surrounding red and near infrared light therapy is increased Mitochondrial energy production in the cells. Mitochondria are tiny organelles that are the energy power plants of all the cells in our body. Red and near infrared light therapy helps the Mitochondria create more of that energy. The specific photons found in red and near infrared light interact with a photoreceptors within our cells called cytochrome c oxidase. This interaction stimulates the mitochondria in our cells to use oxygen more efficiently, which allows the mitochondria to produce more ATP (adenosine triphosphate). Adenosine triphosphate is a complex organic chemical that provides energy to drive many processes in living cells, e.g. muscle contraction, nerve impulse propagation, and chemical synthesis. Found in all forms of life, ATP is often referred to as the “molecular unit of currency” of intracellular energy transfer. When our cells have more energy, they simply perform better and the body follows suit!

Our lights have been third-party tested and validated by an independent testing laboratory. Other red light therapy lights on the market may appear similar – but the reality is unless those companies publish transparent, independent testing data, you just don’t know what you are getting. And again, our customers’ real-life results speak volumes.

While there is a growing body of scientific research suggesting that modest amounts of red and NIR LED light may benefit certain eye conditions, our plug-in lights are very bright! As such, goggles are provided and should be worn when facing the lights, particularly when NIR is active. When using, DO NOT stare directly into the light emitting diodes (LEDs). Again, our Red Lights are very bright and if you have any eye problems, or any other health conditions at all, please consult with a licensed healthcare professional before using a red light therapy device.

Most users notice changes within 2–3 weeks of consistent use (3–5 sessions/week). Skin looks brighter, breathing improves, and soreness fades gradually.

Yes, daily use is safe for most people. Stick to 10–20 minutes per session. Use protective goggles if you’re sensitive to bright light.

Users report improvements in acne, eczema, joint pain, inflammation, asthma, sinus congestion, stress, and poor sleep. Results vary by condition and consistency.

Yes. The booth combines full-body red light + halotherapy in one unit. Smaller devices only treat small areas. Salt rooms don’t include light therapy. Halo Red offers both — saving time and delivering more complete results.

Generally safe, but if you’re pregnant, have lupus, severe asthma, or are light-sensitive, consult your doctor before starting.

Assembly takes 60–90 minutes with two people. Instructions and video guides are provided. White-glove delivery and setup are available.

The built-in UV light system activates between sessions to sanitize the interior — no sprays or manual cleaning required.

50,000+ hours (up to 17 years at 8 hours/day). Panels are covered by a 2–3 year warranty, depending on your model.

Contact our U.S.-based support team. Warranties cover the halogenerator for life, red lights for 2 years, and structural components for 5 years.